[PATCH v2 19/27] pci: PCIe driver for Marvell Armada 370/XP systems

[Jason Gunthorpe]

On Tue, Jan 29, 2013 at 03:27:43PM -0700, Bjorn Helgaas wrote:

> I'm not sure the existing emulation in these patches is sufficient.
> For example, pci_sw_pci_bridge_write() updates bridge->membase when we
> write to the window register, but I don't see anything that updates
> the actual hardware decoder.  That might be done in
> mvebu_pcie_window_config_port() via armada_370_xp_alloc_pcie_window(),
> but that looks like it's only done once.  If the PCI core updates a
> root port window later, I don't see where the hardware decoder will be
> updated.
> 
> Maybe you're counting on the window assignments to be static?  The PCI
> core doesn't guarantee anything like that, though in the absence of
> hotplug I don't know any reason why it would change things.
 
Agree..

Thomas, I think you need to directly update the Marvell hardware
registers when config writes are made to the SW bridge. If this means
it is too hard/complex to keep the code general then I'd say make it
part of the Marvell host driver.

> I also forgot about the bus number munging in mvebu_pcie_rd_conf().
> The PCI core can update the bridge secondary/subordinate registers.
> It looks like you don't support writing to them, and the read path
> (pci_sw_pci_bridge_read()) looks like it doesn't do any translation
> between the hardware and Linux bus numbers.  I don't understand the
> system well enough to know if this is an issue.

I was chatting with Thomas on this subject, it looks like there is a
HW register that needs to be set to the subordinate bus number of the
bridge, that will solve this weirdness.

Jason