[PATCH v2 1/2] ARM: kirkwood: Ensure that kirkwood_ge0[01]_init() finds its clock

[Sebastian Hesselbarth]

On 01/30/2013 01:03 AM, Simon Baatz wrote:
> On Tue, Jan 29, 2013 at 09:08:46PM +0100, Sebastian Hesselbarth wrote:
>> Well, if there is no device/driver using runit it should be safe to disable
>> it. If there is a driver using it, we need a clocks property for it. And
>> as you already stated, serial is using it. And you want serial in every
>> minimal kernel, don't you?
>
>  From f479db4:
>
>   Marvell engineers tell us:
>
>   It seems that many units use the RUNIT clock.
>   SPI, UART, NAND, TWSI, ...
>   So it's not possible to clock gate it.
>
>   Currently the SPI, NAND and TWSI driver will clk_prepaure_enable()
>   this clk, but since we have no idea what ... is, and turning this clk
>   off results in a hard lock, unconditionally enable runit.
>
>
> Thus, if we know better than that, that's fine, but please don't tell
> me that this is "blindly" enabling clocks.

Hmm, should have seen that comment ealier. Based on your/Andrew's statement
above using CLK_IGNORE_UNUSED on runit maybe is the best.

So I guess we take patch 2/2 and extend DT clock gating for .flags later?

> So, we have a statement from Marvell not to gate it, we know that it
> is needed for "...", can we please not gate it?

Ack.

>>>>> 3.8-rc5 + runit + Sebastians get smi clock patch (modified to use
>>>>> legacy clock names):
>>>>>
>>>>> DT: Boots, but no MAC
>>>>> non-DT: Boots ok
>>>
>>> This is the behavior originally found by Andrew. The clock patch
>>> eliminates the lockup, but the hardware forgets its MAC address.

For the smi clock issue: DT is fixed by the smi clock patch, right?
non-DT should be fixed in kirkwood_clk_init() with an orion_clkdev_add()
alias for MV643XX_ETH_SHARED_NAME ".0" and ".1" respectively.

For the MAC address issue: non-DT doesn't need to be fixed, right?
DT clock gates should be fixed in kirkwood_legacy_clk_init which will
also save the clk_get_sys() call. We can easily remove it when mv643xx_eth
catches the MAC address from either local-mac-address or ATAG.

> Fine with all of that. But: I am talking about 3.8 all the time. We
> have three options for issues 2 and 3 from my point of view:
>
> 1. We do proper fixes in 3.8 for issues 2 and 3.
>
> 2. We fix this regression by not gating the clock in both the DT and
> the non-DT case, preferably by using the correct clocks in
> kirkwood_ge0[01]_init().  Additionally, Jason promises that all gets
> well with the DT aware driver in 3.9.  ;-)
>
> 3. Do nothing. Simply accept that we broke modular Ethernet for DT
> because some code relies on two pointers being set.  When we
> introduced a new code path for DT, we forgot about these pointers.
> Bad luck, the solution was not nice anyway and we will do proper
> fixes in 3.9.
>
> As should be clear by now, I think we should go for option 2.

Agreed, do you think all issues you are suffering will be solved with:

- [PATCH v2 2/2] clk: mvebu: Do not gate runit clock on Kirkwood
   (no lockup for minimal kernel configs)

- [PATCH] NET: mv643xx: get smi clock from device tree
   (no lockup for modular DT ethernet)

- Some patch that adds MV643XX_ETH_SHARED_NAME ".0" and ".1" clk aliases
   (no lockup for modular non-DT ethernet)

- Some patch that adds clk_prepare_enable to ge0/ge1 clocks to
   kirkwood_legacy_clk_init()
   (retain MAC address for modular DT ethernet)

I'll prepare the latter patches and post them.

Sebastian