[PATCH 3/5] pinctrl/abx500: add AB9540 sub-driver
Linus Walleij
linus.walleij at stericsson.com
Mon Jan 28 08:52:15 EST 2013
From: Patrice Chotard <patrice.chotard at stericsson.com>
Add AB9540 sub driver to the ABx500 family, pins, pin groups and
gpio range.
As the pin controller (also the ABx500 controllers) is an
inherent part of the SoC and will prevent boot if not
available, select this from the Ux500 SoC Kconfig.
Signed-off-by: Patrice Chotard <patrice.chotard at stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
---
Request an ACK from the ARM SoC maintainers for this patch.
---
arch/arm/mach-ux500/Kconfig | 1 +
drivers/pinctrl/Kconfig | 4 +
drivers/pinctrl/Makefile | 1 +
drivers/pinctrl/pinctrl-ab9540.c | 485 +++++++++++++++++++++++++++++++++++++++
drivers/pinctrl/pinctrl-abx500.c | 3 +
drivers/pinctrl/pinctrl-abx500.h | 13 ++
6 files changed, 507 insertions(+)
create mode 100644 drivers/pinctrl/pinctrl-ab9540.c
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index 5279459..9434063 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -21,6 +21,7 @@ config UX500_SOC_DB8500
select PINCTRL_DB8500
select PINCTRL_AB8500
select PINCTRL_AB8505
+ select PINCTRL_AB9540
select REGULATOR
select REGULATOR_DB8500_PRCMU
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index e7db9fa..aea4ceb 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -37,6 +37,10 @@ config PINCTRL_AB8500
bool "AB8500 pin controller driver"
depends on PINCTRL_ABX500 && ARCH_U8500
+config PINCTRL_AB9540
+ bool "AB9540 pin controller driver"
+ depends on PINCTRL_ABX500 && ARCH_U8500
+
config PINCTRL_AB8505
bool "AB8505 pin controller driver"
depends on PINCTRL_ABX500 && ARCH_U8500
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index 2cc0115..e866b79 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -11,6 +11,7 @@ endif
obj-$(CONFIG_GENERIC_PINCONF) += pinconf-generic.o
obj-$(CONFIG_PINCTRL_ABX500) += pinctrl-abx500.o
obj-$(CONFIG_PINCTRL_AB8500) += pinctrl-ab8500.o
+obj-$(CONFIG_PINCTRL_AB9540) += pinctrl-ab9540.o
obj-$(CONFIG_PINCTRL_AB8505) += pinctrl-ab8505.o
obj-$(CONFIG_PINCTRL_AT91) += pinctrl-at91.o
obj-$(CONFIG_PINCTRL_BCM2835) += pinctrl-bcm2835.o
diff --git a/drivers/pinctrl/pinctrl-ab9540.c b/drivers/pinctrl/pinctrl-ab9540.c
new file mode 100644
index 0000000..7b66f30
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-ab9540.c
@@ -0,0 +1,485 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2012
+ *
+ * Author: Patrice Chotard <patrice.chotard at stericsson.com> for ST-Ericsson.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/mfd/abx500/ab8500.h>
+#include "pinctrl-abx500.h"
+
+/* All the pins that can be used for GPIO and some other functions */
+#define ABX500_GPIO(offset) (offset)
+
+#define AB9540_PIN_R4 ABX500_GPIO(1)
+#define AB9540_PIN_V3 ABX500_GPIO(2)
+#define AB9540_PIN_T4 ABX500_GPIO(3)
+#define AB9540_PIN_T5 ABX500_GPIO(4)
+/* hole */
+#define AB9540_PIN_B18 ABX500_GPIO(10)
+#define AB9540_PIN_C18 ABX500_GPIO(11)
+/* hole */
+#define AB9540_PIN_D18 ABX500_GPIO(13)
+#define AB9540_PIN_B19 ABX500_GPIO(14)
+#define AB9540_PIN_C19 ABX500_GPIO(15)
+#define AB9540_PIN_D19 ABX500_GPIO(16)
+#define AB9540_PIN_R3 ABX500_GPIO(17)
+#define AB9540_PIN_T2 ABX500_GPIO(18)
+#define AB9540_PIN_U2 ABX500_GPIO(19)
+#define AB9540_PIN_V2 ABX500_GPIO(20)
+#define AB9540_PIN_N17 ABX500_GPIO(21)
+#define AB9540_PIN_N16 ABX500_GPIO(22)
+#define AB9540_PIN_M19 ABX500_GPIO(23)
+#define AB9540_PIN_T3 ABX500_GPIO(24)
+#define AB9540_PIN_W2 ABX500_GPIO(25)
+/* hole */
+#define AB9540_PIN_H4 ABX500_GPIO(27)
+#define AB9540_PIN_F1 ABX500_GPIO(28)
+#define AB9540_PIN_F4 ABX500_GPIO(29)
+#define AB9540_PIN_F2 ABX500_GPIO(30)
+#define AB9540_PIN_E4 ABX500_GPIO(31)
+#define AB9540_PIN_F3 ABX500_GPIO(32)
+/* hole */
+#define AB9540_PIN_J13 ABX500_GPIO(34)
+/* hole */
+#define AB9540_PIN_L17 ABX500_GPIO(40)
+#define AB9540_PIN_L16 ABX500_GPIO(41)
+#define AB9540_PIN_W3 ABX500_GPIO(42)
+#define AB9540_PIN_N4 ABX500_GPIO(50)
+#define AB9540_PIN_G12 ABX500_GPIO(51)
+#define AB9540_PIN_E17 ABX500_GPIO(52)
+#define AB9540_PIN_D11 ABX500_GPIO(53)
+#define AB9540_PIN_M18 ABX500_GPIO(54)
+
+/* indicates the highest GPIO number */
+#define AB9540_GPIO_MAX_NUMBER 54
+
+/*
+ * The names of the pins are denoted by GPIO number and ball name, even
+ * though they can be used for other things than GPIO, this is the first
+ * column in the table of the data sheet and often used on schematics and
+ * such.
+ */
+static const struct pinctrl_pin_desc ab9540_pins[] = {
+ PINCTRL_PIN(AB9540_PIN_R4, "GPIO1_R4"),
+ PINCTRL_PIN(AB9540_PIN_V3, "GPIO2_V3"),
+ PINCTRL_PIN(AB9540_PIN_T4, "GPIO3_T4"),
+ PINCTRL_PIN(AB9540_PIN_T5, "GPIO4_T5"),
+ /* hole */
+ PINCTRL_PIN(AB9540_PIN_B18, "GPIO10_B18"),
+ PINCTRL_PIN(AB9540_PIN_C18, "GPIO11_C18"),
+ /* hole */
+ PINCTRL_PIN(AB9540_PIN_D18, "GPIO13_D18"),
+ PINCTRL_PIN(AB9540_PIN_B19, "GPIO14_B19"),
+ PINCTRL_PIN(AB9540_PIN_C19, "GPIO15_C19"),
+ PINCTRL_PIN(AB9540_PIN_D19, "GPIO16_D19"),
+ PINCTRL_PIN(AB9540_PIN_R3, "GPIO17_R3"),
+ PINCTRL_PIN(AB9540_PIN_T2, "GPIO18_T2"),
+ PINCTRL_PIN(AB9540_PIN_U2, "GPIO19_U2"),
+ PINCTRL_PIN(AB9540_PIN_V2, "GPIO20_V2"),
+ PINCTRL_PIN(AB9540_PIN_N17, "GPIO21_N17"),
+ PINCTRL_PIN(AB9540_PIN_N16, "GPIO22_N16"),
+ PINCTRL_PIN(AB9540_PIN_M19, "GPIO23_M19"),
+ PINCTRL_PIN(AB9540_PIN_T3, "GPIO24_T3"),
+ PINCTRL_PIN(AB9540_PIN_W2, "GPIO25_W2"),
+ /* hole */
+ PINCTRL_PIN(AB9540_PIN_H4, "GPIO27_H4"),
+ PINCTRL_PIN(AB9540_PIN_F1, "GPIO28_F1"),
+ PINCTRL_PIN(AB9540_PIN_F4, "GPIO29_F4"),
+ PINCTRL_PIN(AB9540_PIN_F2, "GPIO30_F2"),
+ PINCTRL_PIN(AB9540_PIN_E4, "GPIO31_E4"),
+ PINCTRL_PIN(AB9540_PIN_F3, "GPIO32_F3"),
+ /* hole */
+ PINCTRL_PIN(AB9540_PIN_J13, "GPIO34_J13"),
+ /* hole */
+ PINCTRL_PIN(AB9540_PIN_L17, "GPIO40_L17"),
+ PINCTRL_PIN(AB9540_PIN_L16, "GPIO41_L16"),
+ PINCTRL_PIN(AB9540_PIN_W3, "GPIO42_W3"),
+ PINCTRL_PIN(AB9540_PIN_N4, "GPIO50_N4"),
+ PINCTRL_PIN(AB9540_PIN_G12, "GPIO51_G12"),
+ PINCTRL_PIN(AB9540_PIN_E17, "GPIO52_E17"),
+ PINCTRL_PIN(AB9540_PIN_D11, "GPIO53_D11"),
+ PINCTRL_PIN(AB9540_PIN_M18, "GPIO60_M18"),
+};
+
+/*
+ * Maps local GPIO offsets to local pin numbers
+ */
+static const struct abx500_pinrange ab9540_pinranges[] = {
+ ABX500_PINRANGE(1, 4, ABX500_ALT_A),
+ ABX500_PINRANGE(10, 2, ABX500_DEFAULT),
+ ABX500_PINRANGE(13, 1, ABX500_DEFAULT),
+ ABX500_PINRANGE(14, 12, ABX500_ALT_A),
+ ABX500_PINRANGE(27, 6, ABX500_ALT_A),
+ ABX500_PINRANGE(34, 1, ABX500_ALT_A),
+ ABX500_PINRANGE(40, 3, ABX500_ALT_A),
+ ABX500_PINRANGE(50, 1, ABX500_DEFAULT),
+ ABX500_PINRANGE(51, 3, ABX500_ALT_A),
+ ABX500_PINRANGE(54, 1, ABX500_DEFAULT),
+};
+
+/*
+ * Read the pin group names like this:
+ * sysclkreq2_d_1 = first groups of pins for sysclkreq2 on default function
+ *
+ * The groups are arranged as sets per altfunction column, so we can
+ * mux in one group at a time by selecting the same altfunction for them
+ * all. When functions require pins on different altfunctions, you need
+ * to combine several groups.
+ */
+
+/* default column */
+static const unsigned sysclkreq2_d_1_pins[] = { AB9540_PIN_R4 };
+static const unsigned sysclkreq3_d_1_pins[] = { AB9540_PIN_V3 };
+static const unsigned sysclkreq4_d_1_pins[] = { AB9540_PIN_T4 };
+static const unsigned sysclkreq6_d_1_pins[] = { AB9540_PIN_T5 };
+static const unsigned gpio10_d_1_pins[] = { AB9540_PIN_B18 };
+static const unsigned gpio11_d_1_pins[] = { AB9540_PIN_C18 };
+static const unsigned gpio13_d_1_pins[] = { AB9540_PIN_D18 };
+static const unsigned pwmout1_d_1_pins[] = { AB9540_PIN_B19 };
+static const unsigned pwmout2_d_1_pins[] = { AB9540_PIN_C19 };
+static const unsigned pwmout3_d_1_pins[] = { AB9540_PIN_D19 };
+/* audio data interface 1*/
+static const unsigned adi1_d_1_pins[] = { AB9540_PIN_R3, AB9540_PIN_T2,
+ AB9540_PIN_U2, AB9540_PIN_V2 };
+/* USBUICC */
+static const unsigned usbuicc_d_1_pins[] = { AB9540_PIN_N17, AB9540_PIN_N16,
+ AB9540_PIN_M19 };
+static const unsigned sysclkreq7_d_1_pins[] = { AB9540_PIN_T3 };
+static const unsigned sysclkreq8_d_1_pins[] = { AB9540_PIN_W2 };
+/* Digital microphone 1 and 2 */
+static const unsigned dmic12_d_1_pins[] = { AB9540_PIN_H4, AB9540_PIN_F1 };
+/* Digital microphone 3 and 4 */
+static const unsigned dmic34_d_1_pins[] = { AB9540_PIN_F4, AB9540_PIN_F2 };
+/* Digital microphone 5 and 6 */
+static const unsigned dmic56_d_1_pins[] = { AB9540_PIN_E4, AB9540_PIN_F3 };
+static const unsigned extcpena_d_1_pins[] = { AB9540_PIN_J13 };
+/* modem SDA/SCL */
+static const unsigned modsclsda_d_1_pins[] = { AB9540_PIN_L17, AB9540_PIN_L16 };
+static const unsigned sysclkreq5_d_1_pins[] = { AB9540_PIN_W3 };
+static const unsigned gpio50_d_1_pins[] = { AB9540_PIN_N4 };
+static const unsigned batremn_d_1_pins[] = { AB9540_PIN_G12 };
+static const unsigned resethw_d_1_pins[] = { AB9540_PIN_E17 };
+static const unsigned service_d_1_pins[] = { AB9540_PIN_D11 };
+static const unsigned gpio60_d_1_pins[] = { AB9540_PIN_M18 };
+
+/* Altfunction A column */
+static const unsigned gpio1_a_1_pins[] = { AB9540_PIN_R4 };
+static const unsigned gpio2_a_1_pins[] = { AB9540_PIN_V3 };
+static const unsigned gpio3_a_1_pins[] = { AB9540_PIN_T4 };
+static const unsigned gpio4_a_1_pins[] = { AB9540_PIN_T5 };
+static const unsigned hiqclkena_a_1_pins[] = { AB9540_PIN_B18 };
+static const unsigned pdmclk_a_1_pins[] = { AB9540_PIN_C18 };
+static const unsigned uartdata_a_1_pins[] = { AB9540_PIN_D18, AB9540_PIN_N4 };
+static const unsigned gpio14_a_1_pins[] = { AB9540_PIN_B19 };
+static const unsigned gpio15_a_1_pins[] = { AB9540_PIN_C19 };
+static const unsigned gpio16_a_1_pins[] = { AB9540_PIN_D19 };
+static const unsigned gpio17_a_1_pins[] = { AB9540_PIN_R3 };
+static const unsigned gpio18_a_1_pins[] = { AB9540_PIN_T2 };
+static const unsigned gpio19_a_1_pins[] = { AB9540_PIN_U2 };
+static const unsigned gpio20_a_1_pins[] = { AB9540_PIN_V2 };
+static const unsigned gpio21_a_1_pins[] = { AB9540_PIN_N17 };
+static const unsigned gpio22_a_1_pins[] = { AB9540_PIN_N16 };
+static const unsigned gpio23_a_1_pins[] = { AB9540_PIN_M19 };
+static const unsigned gpio24_a_1_pins[] = { AB9540_PIN_T3 };
+static const unsigned gpio25_a_1_pins[] = { AB9540_PIN_W2 };
+static const unsigned gpio27_a_1_pins[] = { AB9540_PIN_H4 };
+static const unsigned gpio28_a_1_pins[] = { AB9540_PIN_F1 };
+static const unsigned gpio29_a_1_pins[] = { AB9540_PIN_F4 };
+static const unsigned gpio30_a_1_pins[] = { AB9540_PIN_F2 };
+static const unsigned gpio31_a_1_pins[] = { AB9540_PIN_E4 };
+static const unsigned gpio32_a_1_pins[] = { AB9540_PIN_F3 };
+static const unsigned gpio34_a_1_pins[] = { AB9540_PIN_J13 };
+static const unsigned gpio40_a_1_pins[] = { AB9540_PIN_L17 };
+static const unsigned gpio41_a_1_pins[] = { AB9540_PIN_L16 };
+static const unsigned gpio42_a_1_pins[] = { AB9540_PIN_W3 };
+static const unsigned gpio51_a_1_pins[] = { AB9540_PIN_G12 };
+static const unsigned gpio52_a_1_pins[] = { AB9540_PIN_E17 };
+static const unsigned gpio53_a_1_pins[] = { AB9540_PIN_D11 };
+static const unsigned usbuiccpd_a_1_pins[] = { AB9540_PIN_M18 };
+
+/* Altfunction B colum */
+static const unsigned pdmdata_b_1_pins[] = { AB9540_PIN_B18 };
+static const unsigned pwmextvibra1_b_1_pins[] = { AB9540_PIN_D18 };
+static const unsigned pwmextvibra2_b_1_pins[] = { AB9540_PIN_N4 };
+
+/* Altfunction C column */
+static const unsigned usbvdat_c_1_pins[] = { AB9540_PIN_D18 };
+
+#define AB9540_PIN_GROUP(a, b) { .name = #a, .pins = a##_pins, \
+ .npins = ARRAY_SIZE(a##_pins), .altsetting = b }
+
+static const struct abx500_pingroup ab9540_groups[] = {
+ /* default column */
+ AB9540_PIN_GROUP(sysclkreq2_d_1, ABX500_DEFAULT),
+ AB9540_PIN_GROUP(sysclkreq3_d_1, ABX500_DEFAULT),
+ AB9540_PIN_GROUP(sysclkreq4_d_1, ABX500_DEFAULT),
+ AB9540_PIN_GROUP(sysclkreq6_d_1, ABX500_DEFAULT),
+ AB9540_PIN_GROUP(gpio10_d_1, ABX500_DEFAULT),
+ AB9540_PIN_GROUP(gpio11_d_1, ABX500_DEFAULT),
+ AB9540_PIN_GROUP(gpio13_d_1, ABX500_DEFAULT),
+ AB9540_PIN_GROUP(pwmout1_d_1, ABX500_DEFAULT),
+ AB9540_PIN_GROUP(pwmout2_d_1, ABX500_DEFAULT),
+ AB9540_PIN_GROUP(pwmout3_d_1, ABX500_DEFAULT),
+ AB9540_PIN_GROUP(adi1_d_1, ABX500_DEFAULT),
+ AB9540_PIN_GROUP(usbuicc_d_1, ABX500_DEFAULT),
+ AB9540_PIN_GROUP(sysclkreq7_d_1, ABX500_DEFAULT),
+ AB9540_PIN_GROUP(sysclkreq8_d_1, ABX500_DEFAULT),
+ AB9540_PIN_GROUP(dmic12_d_1, ABX500_DEFAULT),
+ AB9540_PIN_GROUP(dmic34_d_1, ABX500_DEFAULT),
+ AB9540_PIN_GROUP(dmic56_d_1, ABX500_DEFAULT),
+ AB9540_PIN_GROUP(extcpena_d_1, ABX500_DEFAULT),
+ AB9540_PIN_GROUP(modsclsda_d_1, ABX500_DEFAULT),
+ AB9540_PIN_GROUP(sysclkreq5_d_1, ABX500_DEFAULT),
+ AB9540_PIN_GROUP(gpio50_d_1, ABX500_DEFAULT),
+ AB9540_PIN_GROUP(batremn_d_1, ABX500_DEFAULT),
+ AB9540_PIN_GROUP(resethw_d_1, ABX500_DEFAULT),
+ AB9540_PIN_GROUP(service_d_1, ABX500_DEFAULT),
+ AB9540_PIN_GROUP(gpio60_d_1, ABX500_DEFAULT),
+
+ /* Altfunction A column */
+ AB9540_PIN_GROUP(gpio1_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(gpio2_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(gpio3_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(gpio4_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(hiqclkena_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(pdmclk_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(uartdata_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(gpio14_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(gpio15_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(gpio16_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(gpio17_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(gpio18_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(gpio19_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(gpio20_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(gpio21_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(gpio22_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(gpio23_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(gpio24_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(gpio25_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(gpio27_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(gpio28_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(gpio29_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(gpio30_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(gpio31_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(gpio32_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(gpio34_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(gpio40_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(gpio41_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(gpio42_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(gpio51_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(gpio52_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(gpio53_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(usbuiccpd_a_1, ABX500_ALT_A),
+
+ /* Altfunction B column */
+ AB9540_PIN_GROUP(pdmdata_b_1, ABX500_ALT_B),
+ AB9540_PIN_GROUP(pwmextvibra1_b_1, ABX500_ALT_B),
+ AB9540_PIN_GROUP(pwmextvibra2_b_1, ABX500_ALT_B),
+
+ /* Altfunction C column */
+ AB9540_PIN_GROUP(usbvdat_c_1, ABX500_ALT_C),
+};
+
+/* We use this macro to define the groups applicable to a function */
+#define AB9540_FUNC_GROUPS(a, b...) \
+static const char * const a##_groups[] = { b };
+
+AB9540_FUNC_GROUPS(sysclkreq, "sysclkreq2_d_1", "sysclkreq3_d_1",
+ "sysclkreq4_d_1", "sysclkreq5_d_1", "sysclkreq6_d_1",
+ "sysclkreq7_d_1", "sysclkreq8_d_1");
+AB9540_FUNC_GROUPS(gpio, "gpio1_a_1", "gpio2_a_1", "gpio3_a_1", "gpio4_a_1",
+ "gpio10_d_1", "gpio11_d_1", "gpio13_d_1", "gpio14_a_1",
+ "gpio15_a_1", "gpio16_a_1", "gpio17_a_1", "gpio18_a_1",
+ "gpio19_a_1", "gpio20_a_1", "gpio21_a_1", "gpio22_a_1",
+ "gpio23_a_1", "gpio24_a_1", "gpio25_a_1", "gpio27_a_1",
+ "gpio28_a_1", "gpio29_a_1", "gpio30_a_1", "gpio31_a_1",
+ "gpio32_a_1", "gpio34_a_1", "gpio40_a_1", "gpio41_a_1",
+ "gpio42_a_1", "gpio50_d_1", "gpio51_a_1", "gpio52_a_1",
+ "gpio53_a_1", "gpio60_d_1");
+AB9540_FUNC_GROUPS(pwmout, "pwmout1_d_1", "pwmout2_d_1", "pwmout3_d_1");
+AB9540_FUNC_GROUPS(adi1, "adi1_d_1");
+AB9540_FUNC_GROUPS(usbuicc, "usbuicc_d_1", "usbuiccpd_a_1");
+AB9540_FUNC_GROUPS(dmic, "dmic12_d_1", "dmic34_d_1", "dmic56_d_1");
+AB9540_FUNC_GROUPS(extcpena, "extcpena_d_1");
+AB9540_FUNC_GROUPS(modsclsda, "modsclsda_d_1");
+AB9540_FUNC_GROUPS(batremn, "batremn_d_1");
+AB9540_FUNC_GROUPS(resethw, "resethw_d_1");
+AB9540_FUNC_GROUPS(service, "service_d_1");
+AB9540_FUNC_GROUPS(hiqclkena, "hiqclkena_a_1");
+AB9540_FUNC_GROUPS(pdm, "pdmdata_b_1", "pdmclk_a_1");
+AB9540_FUNC_GROUPS(uartdata, "uartdata_a_1");
+AB9540_FUNC_GROUPS(pwmextvibra, "pwmextvibra1_b_1", "pwmextvibra2_b_1");
+AB9540_FUNC_GROUPS(usbvdat, "usbvdat_c_1");
+
+#define FUNCTION(fname) \
+ { \
+ .name = #fname, \
+ .groups = fname##_groups, \
+ .ngroups = ARRAY_SIZE(fname##_groups), \
+ }
+
+static const struct abx500_function ab9540_functions[] = {
+ FUNCTION(sysclkreq),
+ FUNCTION(gpio),
+ FUNCTION(pwmout),
+ FUNCTION(adi1),
+ FUNCTION(usbuicc),
+ FUNCTION(dmic),
+ FUNCTION(extcpena),
+ FUNCTION(modsclsda),
+ FUNCTION(batremn),
+ FUNCTION(resethw),
+ FUNCTION(service),
+ FUNCTION(hiqclkena),
+ FUNCTION(pdm),
+ FUNCTION(uartdata),
+ FUNCTION(pwmextvibra),
+ FUNCTION(usbvdat),
+};
+
+/*
+ * this table translates what's is in the AB9540 specification regarding the
+ * balls alternate functions (as for DB, default, ALT_A, ALT_B and ALT_C).
+ * ALTERNATE_FUNCTIONS(GPIO_NUMBER, GPIOSEL bit, ALTERNATFUNC bit1,
+ * ALTERNATEFUNC bit2, ALTA val, ALTB val, ALTC val),
+ *
+ * example :
+ *
+ * ALTERNATE_FUNCTIONS(13, 4, 3, 4, 1, 0, 2),
+ * means that pin AB9540_PIN_D18 (pin 13) supports 4 mux (default/ALT_A,
+ * ALT_B and ALT_C), so GPIOSEL and ALTERNATFUNC registers are used to
+ * select the mux. ALTA, ALTB and ALTC val indicates values to write in
+ * ALTERNATFUNC register. We need to specifies these values as SOC
+ * designers didn't apply the same logic on how to select mux in the
+ * ABx500 family.
+ *
+ * As this pins supports at least ALT_B mux, default mux is
+ * selected by writing 1 in GPIOSEL bit :
+ *
+ * | GPIOSEL bit=4 | alternatfunc bit2=4 | alternatfunc bit1=3
+ * default | 1 | 0 | 0
+ * alt_A | 0 | 0 | 1
+ * alt_B | 0 | 0 | 0
+ * alt_C | 0 | 1 | 0
+ *
+ * ALTERNATE_FUNCTIONS(1, 0, UNUSED, UNUSED),
+ * means that pin AB9540_PIN_R4 (pin 1) supports 2 mux, so only GPIOSEL
+ * register is used to select the mux. As this pins doesn't support at
+ * least ALT_B mux, default mux is by writing 0 in GPIOSEL bit :
+ *
+ * | GPIOSEL bit=0 | alternatfunc bit2= | alternatfunc bit1=
+ * default | 0 | 0 | 0
+ * alt_A | 1 | 0 | 0
+ */
+
+struct alternate_functions ab9540alternate_functions[AB9540_GPIO_MAX_NUMBER + 1] = {
+ /* GPIOSEL1 - bits 4-7 are reserved */
+ ALTERNATE_FUNCTIONS(0, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO0 */
+ ALTERNATE_FUNCTIONS(1, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO1, altA controlled by bit 0 */
+ ALTERNATE_FUNCTIONS(2, 1, UNUSED, UNUSED, 0, 0, 0), /* GPIO2, altA controlled by bit 1 */
+ ALTERNATE_FUNCTIONS(3, 2, UNUSED, UNUSED, 0, 0, 0), /* GPIO3, altA controlled by bit 2*/
+ ALTERNATE_FUNCTIONS(4, 3, UNUSED, UNUSED, 0, 0, 0), /* GPIO4, altA controlled by bit 3*/
+ ALTERNATE_FUNCTIONS(5, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO5 */
+ ALTERNATE_FUNCTIONS(6, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO6 */
+ ALTERNATE_FUNCTIONS(7, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO7 */
+ ALTERNATE_FUNCTIONS(8, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO8 */
+ /* GPIOSEL2 - bits 0 and 3 are reserved */
+ ALTERNATE_FUNCTIONS(9, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO9 */
+ ALTERNATE_FUNCTIONS(10, 1, 0, UNUSED, 1, 0, 0), /* GPIO10, altA and altB controlled by bit 0 */
+ ALTERNATE_FUNCTIONS(11, 2, UNUSED, UNUSED, 0, 0, 0), /* GPIO11, altA controlled by bit 1 */
+ ALTERNATE_FUNCTIONS(12, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO12 */
+ ALTERNATE_FUNCTIONS(13, 4, 3, 4, 1, 0, 2), /* GPIO13, altA altB and altC controlled by bit 3 and 4 */
+ ALTERNATE_FUNCTIONS(14, 5, UNUSED, UNUSED, 0, 0, 0), /* GPIO14, altA controlled by bit 5 */
+ ALTERNATE_FUNCTIONS(15, 6, UNUSED, UNUSED, 0, 0, 0), /* GPIO15, altA controlled by bit 6 */
+ ALTERNATE_FUNCTIONS(16, 7, UNUSED, UNUSED, 0, 0, 0), /* GPIO16, altA controlled by bit 7 */
+ /* GPIOSEL3 - bit 1-3 reserved
+ * pins 17 to 20 are special case, only bit 0 is used to select
+ * alternate function for these 4 pins.
+ * bits 1 to 3 are reserved
+ */
+ ALTERNATE_FUNCTIONS(17, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO17, altA controlled by bit 0 */
+ ALTERNATE_FUNCTIONS(18, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO18, altA controlled by bit 0 */
+ ALTERNATE_FUNCTIONS(19, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO19, altA controlled by bit 0 */
+ ALTERNATE_FUNCTIONS(20, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO20, altA controlled by bit 0 */
+ ALTERNATE_FUNCTIONS(21, 4, UNUSED, UNUSED, 0, 0, 0), /* GPIO21, altA controlled by bit 4 */
+ ALTERNATE_FUNCTIONS(22, 5, UNUSED, UNUSED, 0, 0, 0), /* GPIO22, altA controlled by bit 5 */
+ ALTERNATE_FUNCTIONS(23, 6, UNUSED, UNUSED, 0, 0, 0), /* GPIO23, altA controlled by bit 6 */
+ ALTERNATE_FUNCTIONS(24, 7, UNUSED, UNUSED, 0, 0, 0), /* GPIO24, altA controlled by bit 7 */
+ /* GPIOSEL4 - bit 1 reserved */
+ ALTERNATE_FUNCTIONS(25, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO25, altA controlled by bit 0 */
+ ALTERNATE_FUNCTIONS(26, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO26 */
+ ALTERNATE_FUNCTIONS(27, 2, UNUSED, UNUSED, 0, 0, 0), /* GPIO27, altA controlled by bit 2 */
+ ALTERNATE_FUNCTIONS(28, 3, UNUSED, UNUSED, 0, 0, 0), /* GPIO28, altA controlled by bit 3 */
+ ALTERNATE_FUNCTIONS(29, 4, UNUSED, UNUSED, 0, 0, 0), /* GPIO29, altA controlled by bit 4 */
+ ALTERNATE_FUNCTIONS(30, 5, UNUSED, UNUSED, 0, 0, 0), /* GPIO30, altA controlled by bit 5 */
+ ALTERNATE_FUNCTIONS(31, 6, UNUSED, UNUSED, 0, 0, 0), /* GPIO31, altA controlled by bit 6 */
+ ALTERNATE_FUNCTIONS(32, 7, UNUSED, UNUSED, 0, 0, 0), /* GPIO32, altA controlled by bit 7 */
+ /* GPIOSEL5 - bit 0, 2-6 are reserved */
+ ALTERNATE_FUNCTIONS(33, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO33 */
+ ALTERNATE_FUNCTIONS(34, 1, UNUSED, UNUSED, 0, 0, 0), /* GPIO34, altA controlled by bit 1 */
+ ALTERNATE_FUNCTIONS(35, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO35 */
+ ALTERNATE_FUNCTIONS(36, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO36 */
+ ALTERNATE_FUNCTIONS(37, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO37 */
+ ALTERNATE_FUNCTIONS(38, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO38 */
+ ALTERNATE_FUNCTIONS(39, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO39 */
+ ALTERNATE_FUNCTIONS(40, 7, UNUSED, UNUSED, 0, 0, 0), /* GPIO40, altA controlled by bit 7 */
+ /* GPIOSEL6 - bit 2-7 are reserved */
+ ALTERNATE_FUNCTIONS(41, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO41, altA controlled by bit 0 */
+ ALTERNATE_FUNCTIONS(42, 1, UNUSED, UNUSED, 0, 0, 0), /* GPIO42, altA controlled by bit 1 */
+ ALTERNATE_FUNCTIONS(43, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO43 */
+ ALTERNATE_FUNCTIONS(44, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO44 */
+ ALTERNATE_FUNCTIONS(45, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO45 */
+ ALTERNATE_FUNCTIONS(46, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO46 */
+ ALTERNATE_FUNCTIONS(47, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO47 */
+ ALTERNATE_FUNCTIONS(48, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO48 */
+ /*
+ * GPIOSEL7 - bit 0 and 6-7 are reserved
+ * special case with GPIO60, wich is located at offset 5 of gpiosel7
+ * don't know why it has been called GPIO60 in AB9540 datasheet,
+ * GPIO54 would be logical..., so at SOC point of view we consider
+ * GPIO60 = GPIO54
+ */
+ ALTERNATE_FUNCTIONS(49, 0, UNUSED, UNUSED, 0, 0, 0), /* no GPIO49 */
+ ALTERNATE_FUNCTIONS(50, 1, 2, UNUSED, 1, 0, 0), /* GPIO50, altA and altB controlled by bit 1 */
+ ALTERNATE_FUNCTIONS(51, 2, UNUSED, UNUSED, 0, 0, 0), /* GPIO51, altA controlled by bit 2 */
+ ALTERNATE_FUNCTIONS(52, 3, UNUSED, UNUSED, 0, 0, 0), /* GPIO52, altA controlled by bit 3 */
+ ALTERNATE_FUNCTIONS(53, 4, UNUSED, UNUSED, 0, 0, 0), /* GPIO53, altA controlled by bit 4 */
+ ALTERNATE_FUNCTIONS(54, 5, UNUSED, UNUSED, 0, 0, 0), /* GPIO54 = GPIO60, altA controlled by bit 5 */
+};
+
+struct abx500_gpio_irq_cluster ab9540_gpio_irq_cluster[] = {
+ GPIO_IRQ_CLUSTER(9, 12, 0), /* GPIO numbers start from 1 */
+ GPIO_IRQ_CLUSTER(23, 24, 0),
+ GPIO_IRQ_CLUSTER(39, 40, 0),
+ GPIO_IRQ_CLUSTER(49, 53, 0),
+};
+
+static struct abx500_pinctrl_soc_data ab9540_soc = {
+ .gpio_ranges = ab9540_pinranges,
+ .gpio_num_ranges = ARRAY_SIZE(ab9540_pinranges),
+ .pins = ab9540_pins,
+ .npins = ARRAY_SIZE(ab9540_pins),
+ .functions = ab9540_functions,
+ .nfunctions = ARRAY_SIZE(ab9540_functions),
+ .groups = ab9540_groups,
+ .ngroups = ARRAY_SIZE(ab9540_groups),
+ .alternate_functions = ab9540alternate_functions,
+ .gpio_irq_cluster = ab9540_gpio_irq_cluster,
+ .ngpio_irq_cluster = ARRAY_SIZE(ab9540_gpio_irq_cluster),
+ .irq_gpio_rising_offset = AB8500_INT_GPIO6R,
+ .irq_gpio_falling_offset = AB8500_INT_GPIO6F,
+ .irq_gpio_factor = 1,
+};
+
+void __devinit
+abx500_pinctrl_ab9540_init(struct abx500_pinctrl_soc_data **soc)
+{
+ *soc = &ab9540_soc;
+}
diff --git a/drivers/pinctrl/pinctrl-abx500.c b/drivers/pinctrl/pinctrl-abx500.c
index 94f9381..39020ac 100644
--- a/drivers/pinctrl/pinctrl-abx500.c
+++ b/drivers/pinctrl/pinctrl-abx500.c
@@ -1119,6 +1119,9 @@ static int abx500_gpio_probe(struct platform_device *pdev)
case PINCTRL_AB8500:
abx500_pinctrl_ab8500_init(&pct->soc);
break;
+ case PINCTRL_AB9540:
+ abx500_pinctrl_ab9540_init(&pct->soc);
+ break;
case PINCTRL_AB8505:
abx500_pinctrl_ab8505_init(&pct->soc);
break;
diff --git a/drivers/pinctrl/pinctrl-abx500.h b/drivers/pinctrl/pinctrl-abx500.h
index 5c5ac75..fe1ccb7 100644
--- a/drivers/pinctrl/pinctrl-abx500.h
+++ b/drivers/pinctrl/pinctrl-abx500.h
@@ -190,6 +190,19 @@ abx500_pinctrl_ab8500_init(struct abx500_pinctrl_soc_data **soc)
#endif
+#ifdef CONFIG_PINCTRL_AB9540
+
+void abx500_pinctrl_ab9540_init(struct abx500_pinctrl_soc_data **soc);
+
+#else
+
+static inline void
+abx500_pinctrl_ab9540_init(struct abx500_pinctrl_soc_data **soc)
+{
+}
+
+#endif
+
#ifdef CONFIG_PINCTRL_AB8505
void abx500_pinctrl_ab8505_init(struct abx500_pinctrl_soc_data **soc);
--
1.7.11.3
More information about the linux-arm-kernel
mailing list