[PATCH 2/2] ARM: Kirkwood: topkick: Enable i2c bus.

Jason Cooper jason at lakedaemon.net
Sat Jan 26 15:40:13 EST 2013


On Sat, Jan 26, 2013 at 05:55:25PM +0100, Andrew Lunn wrote:
> Add a DT node for I2C and pinctrl hog for the pins. There appears to
> be an i2c bus on topkick with a device on it:
> 
> i2cdetect 0
> WARNING! This program can confuse your I2C bus, cause data loss and worse!
> I will probe file /dev/i2c-0.
> I will probe address range 0x03-0x77.
> Continue? [Y/n] y
>      0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f
> 00:          -- -- -- -- -- -- -- -- -- -- -- -- --
> 10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
> 20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
> 30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
> 40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
> 50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
> 60: -- -- -- -- 64 -- -- -- -- -- -- -- -- -- -- --
> 70: -- -- -- -- -- -- -- --
> 
> Signed-off-by: Andrew Lunn <andrew at lunn.ch>
> ---
>  arch/arm/boot/dts/kirkwood-topkick.dts |    6 +++++-
>  1 file changed, 5 insertions(+), 1 deletion(-)

Pulled into series,

thanks,

Jason.



More information about the linux-arm-kernel mailing list