[PATCH v2 2/3] arm: kirkwood: Instantiate cpufreq driver
Andrew Lunn
andrew at lunn.ch
Sat Jan 26 10:43:58 EST 2013
Register a platform driver structure for the cpufreq driver.
Signed-off-by: Andrew Lunn <andrew at lunn.ch>
---
arch/arm/Kconfig | 1 +
arch/arm/mach-kirkwood/board-dt.c | 3 ++-
arch/arm/mach-kirkwood/common.c | 23 +++++++++++++++++++++
arch/arm/mach-kirkwood/common.h | 2 ++
arch/arm/mach-kirkwood/include/mach/bridge-regs.h | 2 ++
5 files changed, 30 insertions(+), 1 deletion(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 67874b8..830975b 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -543,6 +543,7 @@ config ARCH_DOVE
config ARCH_KIRKWOOD
bool "Marvell Kirkwood"
+ select ARCH_HAS_CPUFREQ
select ARCH_REQUIRE_GPIOLIB
select CPU_FEROCEON
select GENERIC_CLOCKEVENTS
diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c
index de4fd2b..fab541d 100644
--- a/arch/arm/mach-kirkwood/board-dt.c
+++ b/arch/arm/mach-kirkwood/board-dt.c
@@ -70,7 +70,6 @@ static void __init kirkwood_legacy_clk_init(void)
clkspec.args[0] = CGC_BIT_SDIO;
orion_clkdev_add(NULL, "mvsdio",
of_clk_get_from_provider(&clkspec));
-
}
static void __init kirkwood_of_clk_init(void)
@@ -95,6 +94,8 @@ static void __init kirkwood_dt_init(void)
kirkwood_l2_init();
+ kirkwood_cpufreq_init();
+
/* Setup root of clk tree */
kirkwood_of_clk_init();
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index bac21a5..a3dc21c 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -584,6 +584,29 @@ void __init kirkwood_audio_init(void)
}
/*****************************************************************************
+ * CPU Frequency
+ ****************************************************************************/
+static struct resource kirkwood_cpufreq_resources[] = {
+ [0] = {
+ .start = CPU_CONTROL_PHYS,
+ .end = CPU_CONTROL_PHYS + 3,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device kirkwood_cpufreq_device = {
+ .name = "kirkwood-cpufreq",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(kirkwood_cpufreq_resources),
+ .resource = kirkwood_cpufreq_resources,
+};
+
+void __init kirkwood_cpufreq_init(void)
+{
+ platform_device_register(&kirkwood_cpufreq_device);
+}
+
+/*****************************************************************************
* General
****************************************************************************/
/*
diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h
index 5ffa57f..9ede04b 100644
--- a/arch/arm/mach-kirkwood/common.h
+++ b/arch/arm/mach-kirkwood/common.h
@@ -50,6 +50,8 @@ void kirkwood_nand_init(struct mtd_partition *parts, int nr_parts, int delay);
void kirkwood_nand_init_rnb(struct mtd_partition *parts, int nr_parts,
int (*dev_ready)(struct mtd_info *));
void kirkwood_audio_init(void);
+void kirkwood_cpufreq_init(void);
+
void kirkwood_restart(char, const char *);
void kirkwood_clk_init(void);
diff --git a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
index 5c82b7d..d4cbe5e 100644
--- a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
+++ b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
@@ -17,6 +17,7 @@
#define CPU_CONFIG_ERROR_PROP 0x00000004
#define CPU_CONTROL (BRIDGE_VIRT_BASE + 0x0104)
+#define CPU_CONTROL_PHYS (BRIDGE_PHYS_BASE + 0x0104)
#define CPU_RESET 0x00000002
#define RSTOUTn_MASK (BRIDGE_VIRT_BASE + 0x0108)
@@ -69,6 +70,7 @@
#define CGC_RUNIT (1 << 7)
#define CGC_XOR0 (1 << 8)
#define CGC_AUDIO (1 << 9)
+#define CGC_POWERSAVE (1 << 11)
#define CGC_SATA0 (1 << 14)
#define CGC_SATA1 (1 << 15)
#define CGC_XOR1 (1 << 16)
--
1.7.10.4
More information about the linux-arm-kernel
mailing list