[PATCH V3 7/8] mv643xx.c: Add basic device tree support.
Jason Cooper
jason at lakedaemon.net
Fri Jan 25 15:53:59 EST 2013
From: Ian Molton <ian.molton at codethink.co.uk>
This patch adds basic device tree support to the mv643xx ethernet driver.
It should be enough for most current users of the device, and should allow
a painless migration.
Signed-off-by: Ian Molton <ian.molton at codethink.co.uk>
Signed-off-by: Jason Cooper <jason at lakedaemon.net>
---
Documentation/devicetree/bindings/net/mv643xx.txt | 75 ++++++++++++++++++
drivers/net/ethernet/marvell/mv643xx_eth.c | 93 +++++++++++++++++++++--
2 files changed, 161 insertions(+), 7 deletions(-)
create mode 100644 Documentation/devicetree/bindings/net/mv643xx.txt
diff --git a/Documentation/devicetree/bindings/net/mv643xx.txt b/Documentation/devicetree/bindings/net/mv643xx.txt
new file mode 100644
index 0000000..2727f798
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/mv643xx.txt
@@ -0,0 +1,75 @@
+mv643xx related nodes.
+
+marvell,mdio-mv643xx:
+
+Required properties:
+
+ - interrupts : <a> where a is the SMI interrupt number.
+ - reg : the base address and size of the controllers register space.
+
+Optional properties:
+ - shared_smi : on some chips, the second PHY is "shared", meaning it is
+ really accessed via the first SMI controller. It is passed in this
+ way due to the present structure of the driver, which requires the
+ base address for the MAC to be passed in via the SMI controllers
+ platform data.
+ - tx_csum_limit : on some devices, this option is required for proper
+ operation wrt. jumbo frames.
+
+
+Example:
+
+smi0: mdio at 72000 {
+ compatible = "marvell,mdio-mv643xx";
+ reg = <0x72000 0x4000>;
+ interrupts = <46>;
+ tx_csum_limit = <1600>;
+ status = "disabled";
+};
+
+smi1: mdio at 76000 {
+ compatible = "marvell,mdio-mv643xx";
+ reg = <0x76000 0x4000>;
+ interrupts = <47>;
+ shared_smi = <&smi0>;
+ tx_csum_limit = <1600>;
+ status = "disabled";
+};
+
+
+
+marvell,mv643xx-eth:
+
+Required properties:
+ - interrupts : the port interrupt number.
+ - mdio : phandle of the smi device as drescribed above
+
+Optional properties:
+ - port_number : the port number on this bus.
+ - phy_addr : the PHY address.
+ - reg : should match the mdio reg this device is attached to.
+ this is a required hack for now due to the way the
+ driver is constructed. This allows the device clock to be
+ kept running so that the MAC is not lost after boot.
+
+
+Example:
+
+egiga0 {
+ compatible = "marvell,mv643xx-eth";
+ reg = <0x72000 0x4000>;
+ mdio = <&smi0>;
+ port_number = <0>;
+ phy_addr = <0x80>;
+ interrupts = <11>;
+};
+
+egiga1 {
+ compatible = "marvell,mv643xx-eth";
+ reg = <0x76000 0x4000>;
+ mdio = <&smi1>;
+ port_number = <0>;
+ phy_addr = <0x81>;
+ interrupts = <15>;
+};
+
diff --git a/drivers/net/ethernet/marvell/mv643xx_eth.c b/drivers/net/ethernet/marvell/mv643xx_eth.c
index 84c1326..7048d7c 100644
--- a/drivers/net/ethernet/marvell/mv643xx_eth.c
+++ b/drivers/net/ethernet/marvell/mv643xx_eth.c
@@ -48,6 +48,9 @@
#include <linux/ethtool.h>
#include <linux/platform_device.h>
#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/of_irq.h>
#include <linux/kernel.h>
#include <linux/spinlock.h>
#include <linux/workqueue.h>
@@ -2586,7 +2589,7 @@ static void infer_hw_params(struct mv643xx_eth_shared_private *msp)
static int mv643xx_eth_shared_probe(struct platform_device *pdev)
{
static int mv643xx_eth_version_printed;
- struct mv643xx_eth_shared_platform_data *pd = pdev->dev.platform_data;
+ struct mv643xx_eth_shared_platform_data *pd;
struct mv643xx_eth_shared_private *msp;
const struct mbus_dram_target_info *dram;
struct resource *res;
@@ -2610,6 +2613,26 @@ static int mv643xx_eth_shared_probe(struct platform_device *pdev)
if (msp->base == NULL)
goto out_free;
+ if (pdev->dev.of_node) {
+ struct device_node *np = NULL;
+
+ /* when all users of this driver use FDT, we can remove this */
+ pd = kzalloc(sizeof(*pd), GFP_KERNEL);
+ if (!pd) {
+ dev_dbg(&pdev->dev, "Could not allocate platform data\n");
+ goto out_free;
+ }
+
+ of_property_read_u32(pdev->dev.of_node,
+ "tx_csum_limit", &pd->tx_csum_limit);
+
+ np = of_parse_phandle(pdev->dev.of_node, "shared_smi", 0);
+ if (np)
+ pd->shared_smi = of_find_device_by_node(np);
+
+ } else {
+ pd = pdev->dev.platform_data;
+ }
/*
* Set up and register SMI bus.
*/
@@ -2642,7 +2665,6 @@ static int mv643xx_eth_shared_probe(struct platform_device *pdev)
res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
if (res != NULL) {
int err;
-
err = request_irq(res->start, mv643xx_eth_err_irq,
IRQF_SHARED, "mv643xx_eth", msp);
if (!err) {
@@ -2660,6 +2682,10 @@ static int mv643xx_eth_shared_probe(struct platform_device *pdev)
msp->tx_csum_limit = (pd != NULL && pd->tx_csum_limit) ?
pd->tx_csum_limit : 9 * 1024;
+
+ if (pdev->dev.of_node)
+ kfree(pd); /* If we created a fake pd, free it now */
+
infer_hw_params(msp);
platform_set_drvdata(pdev, msp);
@@ -2693,12 +2719,21 @@ static int mv643xx_eth_shared_remove(struct platform_device *pdev)
return 0;
}
+#ifdef CONFIG_OF
+static struct of_device_id mv_mdio_dt_ids[] __devinitdata = {
+ { .compatible = "marvell,mdio-mv643xx", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, mv_mdio_dt_ids);
+#endif
+
static struct platform_driver mv643xx_eth_shared_driver = {
.probe = mv643xx_eth_shared_probe,
.remove = mv643xx_eth_shared_remove,
.driver = {
.name = MV643XX_ETH_SHARED_NAME,
.owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(mv_mdio_dt_ids),
},
};
@@ -2858,7 +2893,36 @@ static int mv643xx_eth_probe(struct platform_device *pdev)
struct resource *res;
int err;
- pd = pdev->dev.platform_data;
+ if (pdev->dev.of_node) {
+ struct device_node *np = NULL;
+
+ /* when all users of this driver use FDT, we can remove this */
+ pd = kzalloc(sizeof(*pd), GFP_KERNEL);
+ if (!pd) {
+ dev_dbg(&pdev->dev, "Could not allocate platform data\n");
+ return -ENOMEM;
+ }
+
+ of_property_read_u32(pdev->dev.of_node,
+ "port_number", &pd->port_number);
+
+ if (!of_property_read_u32(pdev->dev.of_node,
+ "phy_addr", &pd->phy_addr))
+ pd->phy_addr = MV643XX_ETH_PHY_ADDR(pd->phy_addr);
+ else
+ pd->phy_addr = MV643XX_ETH_PHY_ADDR_DEFAULT;
+
+ np = of_parse_phandle(pdev->dev.of_node, "mdio", 0);
+ if (np) {
+ pd->shared = of_find_device_by_node(np);
+ } else {
+ kfree(pd);
+ return -ENODEV;
+ }
+ } else {
+ pd = pdev->dev.platform_data;
+ }
+
if (pd == NULL) {
dev_err(&pdev->dev, "no mv643xx_eth_platform_data\n");
return -ENODEV;
@@ -2866,12 +2930,15 @@ static int mv643xx_eth_probe(struct platform_device *pdev)
if (pd->shared == NULL) {
dev_err(&pdev->dev, "no mv643xx_eth_platform_data->shared\n");
- return -ENODEV;
+ err = -ENODEV;
+ goto out_free_pd;
}
dev = alloc_etherdev_mq(sizeof(struct mv643xx_eth_private), 8);
- if (!dev)
- return -ENOMEM;
+ if (!dev) {
+ err = -ENOMEM;
+ goto out_free_pd;
+ }
mp = netdev_priv(dev);
platform_set_drvdata(pdev, mp);
@@ -2908,6 +2975,8 @@ static int mv643xx_eth_probe(struct platform_device *pdev)
init_pscr(mp, pd->speed, pd->duplex);
+ if (pdev->dev.of_node)
+ kfree(pd); /* If we created a fake pd, free it now */
mib_counters_clear(mp);
@@ -2927,7 +2996,6 @@ static int mv643xx_eth_probe(struct platform_device *pdev)
mp->rx_oom.data = (unsigned long)mp;
mp->rx_oom.function = oom_timer_wrapper;
-
res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
BUG_ON(!res);
dev->irq = res->start;
@@ -2976,6 +3044,8 @@ out:
}
#endif
free_netdev(dev);
+out_free_pd:
+ kfree(pd);
return err;
}
@@ -3015,6 +3085,14 @@ static void mv643xx_eth_shutdown(struct platform_device *pdev)
port_reset(mp);
}
+#ifdef CONFIG_OF
+static struct of_device_id mv_eth_dt_ids[] __devinitdata = {
+ { .compatible = "marvell,mv643xx-eth", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, mv_eth_dt_ids);
+#endif
+
static struct platform_driver mv643xx_eth_driver = {
.probe = mv643xx_eth_probe,
.remove = mv643xx_eth_remove,
@@ -3022,6 +3100,7 @@ static struct platform_driver mv643xx_eth_driver = {
.driver = {
.name = MV643XX_ETH_NAME,
.owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(mv_eth_dt_ids),
},
};
--
1.8.1.1
More information about the linux-arm-kernel
mailing list