[PATCH 1/2] gpio: pca953x: use simple irqdomain
Gregory CLEMENT
gregory.clement at free-electrons.com
Fri Jan 25 11:59:27 EST 2013
This switches the legacy irqdomain to the simple one, which will
auto-allocate descriptors, and also make sure that we use
irq_create_mapping() in the to_irq function. Also use the map function
of irq_domain_ops to setup the irq configuration on demand and no more
statically during the initialization of the driver.
Based on a initial patch from Linus Walleij <linus.walleij at linaro.org>
Signed-off-by: Gregory CLEMENT <gregory.clement at free-electrons.com>
---
drivers/gpio/gpio-pca953x.c | 65 +++++++++++++++++++------------------------
1 file changed, 28 insertions(+), 37 deletions(-)
diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c
index 3a68aed..1dc9906 100644
--- a/drivers/gpio/gpio-pca953x.c
+++ b/drivers/gpio/gpio-pca953x.c
@@ -89,7 +89,6 @@ struct pca953x_chip {
u8 irq_stat[MAX_BANK];
u8 irq_trig_raise[MAX_BANK];
u8 irq_trig_fall[MAX_BANK];
- int irq_base;
struct irq_domain *domain;
#endif
@@ -372,7 +371,7 @@ static int pca953x_gpio_to_irq(struct gpio_chip *gc, unsigned off)
struct pca953x_chip *chip;
chip = container_of(gc, struct pca953x_chip, gpio_chip);
- return chip->irq_base + off;
+ return irq_create_mapping(chip->domain, off);
}
static void pca953x_irq_mask(struct irq_data *d)
@@ -520,6 +519,27 @@ static irqreturn_t pca953x_irq_handler(int irq, void *devid)
return IRQ_HANDLED;
}
+static int pca953x_gpio_irq_map(struct irq_domain *d, unsigned int irq,
+ irq_hw_number_t hwirq)
+{
+ irq_clear_status_flags(irq, IRQ_NOREQUEST);
+ irq_set_chip_data(irq, d->host_data);
+ irq_set_chip(irq, &pca953x_irq_chip);
+ irq_set_nested_thread(irq, true);
+#ifdef CONFIG_ARM
+ set_irq_flags(irq, IRQF_VALID);
+#else
+ irq_set_noprobe(irq);
+#endif
+
+ return 0;
+}
+
+static const struct irq_domain_ops pca953x_irq_simple_ops = {
+ .map = pca953x_gpio_irq_map,
+ .xlate = irq_domain_xlate_twocell,
+};
+
static int pca953x_irq_setup(struct pca953x_chip *chip,
const struct i2c_device_id *id,
int irq_base)
@@ -529,7 +549,6 @@ static int pca953x_irq_setup(struct pca953x_chip *chip,
if (irq_base != -1
&& (id->driver_data & PCA_INT)) {
- int lvl;
switch (chip->chip_type) {
case PCA953X_TYPE:
@@ -552,34 +571,13 @@ static int pca953x_irq_setup(struct pca953x_chip *chip,
chip->irq_stat[i] &= chip->reg_direction[i];
mutex_init(&chip->irq_lock);
- chip->irq_base = irq_alloc_descs(-1, irq_base, chip->gpio_chip.ngpio, -1);
- if (chip->irq_base < 0)
- goto out_failed;
-
- chip->domain = irq_domain_add_legacy(client->dev.of_node,
+ chip->domain = irq_domain_add_simple(client->dev.of_node,
chip->gpio_chip.ngpio,
- chip->irq_base,
- 0,
- &irq_domain_simple_ops,
+ irq_base,
+ &pca953x_irq_simple_ops,
NULL);
- if (!chip->domain) {
- ret = -ENODEV;
- goto out_irqdesc_free;
- }
-
- for (lvl = 0; lvl < chip->gpio_chip.ngpio; lvl++) {
- int irq = lvl + chip->irq_base;
-
- irq_clear_status_flags(irq, IRQ_NOREQUEST);
- irq_set_chip_data(irq, chip);
- irq_set_chip(irq, &pca953x_irq_chip);
- irq_set_nested_thread(irq, true);
-#ifdef CONFIG_ARM
- set_irq_flags(irq, IRQF_VALID);
-#else
- irq_set_noprobe(irq);
-#endif
- }
+ if (!chip->domain)
+ return -ENODEV;
ret = request_threaded_irq(client->irq,
NULL,
@@ -589,25 +587,18 @@ static int pca953x_irq_setup(struct pca953x_chip *chip,
if (ret) {
dev_err(&client->dev, "failed to request irq %d\n",
client->irq);
- goto out_irqdesc_free;
+ return ret;
}
chip->gpio_chip.to_irq = pca953x_gpio_to_irq;
}
return 0;
-
-out_irqdesc_free:
- irq_free_descs(chip->irq_base, chip->gpio_chip.ngpio);
-out_failed:
- chip->irq_base = -1;
- return ret;
}
static void pca953x_irq_teardown(struct pca953x_chip *chip)
{
if (chip->irq_base != -1) {
- irq_free_descs(chip->irq_base, chip->gpio_chip.ngpio);
free_irq(chip->client->irq, chip);
}
}
--
1.7.9.5
More information about the linux-arm-kernel
mailing list