[PATCH 3/5] ARM: samsung: fix assembly syntax for new gas

Arnd Bergmann arnd at arndb.de
Fri Jan 25 10:28:29 EST 2013


Recent assembler versions complain about extraneous
whitespace inside [] brackets. This fixes all of
these instances for the samsung platforms. We should
backport this to all kernels that might need to
be built with new binutils.

arch/arm/kernel/entry-armv.S: Assembler messages:
arch/arm/kernel/entry-armv.S:214: Error: ARM register expected -- `ldr r2,[ r6,#(0x10)]'
arch/arm/kernel/entry-armv.S:214: Error: ARM register expected -- `ldr r0,[ r6,#(0x14)]'
arch/arm/kernel/entry-armv.S:430: Error: ARM register expected -- `ldr r2,[ r6,#(0x10)]'
arch/arm/kernel/entry-armv.S:430: Error: ARM register expected -- `ldr r0,[ r6,#(0x14)]'
arch/arm/mach-s3c24xx/sleep-s3c2410.S: Assembler messages:
arch/arm/mach-s3c24xx/sleep-s3c2410.S:48: Error: ARM register expected -- `ldr r7,[ r4 ]'
arch/arm/mach-s3c24xx/sleep-s3c2410.S:49: Error: ARM register expected -- `ldr r8,[ r5 ]'
arch/arm/mach-s3c24xx/sleep-s3c2410.S:50: Error: ARM register expected -- `ldr r9,[ r6 ]'
arch/arm/mach-s3c24xx/sleep-s3c2410.S:64: Error: ARM register expected -- `streq r7,[ r4 ]'
arch/arm/mach-s3c24xx/sleep-s3c2410.S:65: Error: ARM register expected -- `streq r8,[ r5 ]'
arch/arm/mach-s3c24xx/sleep-s3c2410.S:66: Error: ARM register expected -- `streq r9,[ r6 ]'
arch/arm/kernel/debug.S: Assembler messages:
arch/arm/kernel/debug.S:83: Error: ARM register expected -- `ldr r2,[ r2,#((0x0B0)+(((0x56000000)-(0x50000000))+(0xF6000000+(0x01000000))))-((0)+(((0x56000000)-(0x50000000))+(0xF6000000+(0x01000000))))]'
arch/arm/kernel/debug.S:83: Error: ARM register expected -- `ldr r2,[ r3,#(0x18)]'
arch/arm/kernel/debug.S:85: Error: ARM register expected -- `ldr r2,[ r2,#((0x0B0)+(((0x56000000)-(0x50000000))+(0xF6000000+(0x01000000))))-((0)+(((0x56000000)-(0x50000000))+(0xF6000000+(0x01000000))))]'
arch/arm/kernel/debug.S:85: Error: ARM register expected -- `ldr r2,[ r3,#(0x18)]'
arch/arm/mach-s3c24xx/pm-h1940.S: Assembler messages:
arch/arm/mach-s3c24xx/pm-h1940.S:33: Error: ARM register expected -- `ldr pc,[ r0,#((0x0B8)+(((0x56000000)-(0x50000000))+(0xF6000000+(0x01000000))))-(((0x56000000)-(0x50000000))+(0xF6000000+(0x01000000)))]'
arch/arm/mach-s3c24xx/sleep-s3c2412.S: Assembler messages:
arch/arm/mach-s3c24xx/sleep-s3c2412.S:60: Error: ARM register expected -- `ldrne r9,[ r1 ]'
arch/arm/mach-s3c24xx/sleep-s3c2412.S:61: Error: ARM register expected -- `strne r9,[ r1 ]'
arch/arm/mach-s3c24xx/sleep-s3c2412.S:62: Error: ARM register expected -- `ldrne r9,[ r2 ]'
arch/arm/mach-s3c24xx/sleep-s3c2412.S:63: Error: ARM register expected -- `strne r9,[ r2 ]'
arch/arm/mach-s3c24xx/sleep-s3c2412.S:64: Error: ARM register expected -- `ldrne r9,[ r3 ]'
arch/arm/mach-s3c24xx/sleep-s3c2412.S:65: Error: ARM register expected -- `strne r9,[ r3 ]'
arch/arm/kernel/debug.S:83: Error: ARM register expected -- `ldr r2,[ r3,#(0x08)]'
arch/arm/kernel/debug.S:83: Error: ARM register expected -- `ldr r2,[ r3,#(0x18)]'
arch/arm/kernel/debug.S:83: Error: ARM register expected -- `ldr r2,[ r3,#(0x10)]'
arch/arm/kernel/debug.S:85: Error: ARM register expected -- `ldr r2,[ r3,#(0x08)]'
arch/arm/kernel/debug.S:85: Error: ARM register expected -- `ldr r2,[ r3,#(0x18)]'
arch/arm/kernel/debug.S:85: Error: ARM register expected -- `ldr r2,[ r3,#(0x10)]'

Signed-off-by: Arnd Bergmann <arnd at arndb.de>
Cc: Ben Dooks <ben-linux at fluff.org>
Cc: Kukjin Kim <kgene.kim at samsung.com>
Cc: stable at vger.kernel.org
---
 arch/arm/mach-s3c24xx/include/mach/debug-macro.S | 12 ++++++------
 arch/arm/mach-s3c24xx/include/mach/entry-macro.S |  4 ++--
 arch/arm/mach-s3c24xx/pm-h1940.S                 |  2 +-
 arch/arm/mach-s3c24xx/sleep-s3c2410.S            | 12 ++++++------
 arch/arm/mach-s3c24xx/sleep-s3c2412.S            | 12 ++++++------
 arch/arm/plat-samsung/include/plat/debug-macro.S | 18 +++++++++---------
 6 files changed, 30 insertions(+), 30 deletions(-)

diff --git a/arch/arm/mach-s3c24xx/include/mach/debug-macro.S b/arch/arm/mach-s3c24xx/include/mach/debug-macro.S
index 4135de8..13ed33c 100644
--- a/arch/arm/mach-s3c24xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-s3c24xx/include/mach/debug-macro.S
@@ -40,17 +40,17 @@
 		addeq	\rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART)
 		addne	\rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART)
 		bic	\rd, \rd, #0xff000
-		ldr	\rd, [ \rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0) ]
+		ldr	\rd, [\rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0)]
 		and	\rd, \rd, #0x00ff0000
 		teq	\rd, #0x00440000		@ is it 2440?
 1004:
-		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
+		ldr	\rd, [\rx, # S3C2410_UFSTAT]
 		moveq	\rd, \rd, lsr #SHIFT_2440TXF
 		tst	\rd, #S3C2410_UFSTAT_TXFULL
 	.endm
 
 	.macro  fifo_full_s3c2410 rd, rx
-		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
+		ldr	\rd, [\rx, # S3C2410_UFSTAT]
 		tst	\rd, #S3C2410_UFSTAT_TXFULL
 	.endm
 
@@ -68,18 +68,18 @@
 		addeq	\rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART)
 		addne	\rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART)
 		bic	\rd, \rd, #0xff000
-		ldr	\rd, [ \rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0) ]
+		ldr	\rd, [\rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0)]
 		and	\rd, \rd, #0x00ff0000
 		teq	\rd, #0x00440000		@ is it 2440?
 
 10000:
-		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
+		ldr	\rd, [\rx, # S3C2410_UFSTAT]
 		andne	\rd, \rd, #S3C2410_UFSTAT_TXMASK
 		andeq	\rd, \rd, #S3C2440_UFSTAT_TXMASK
 	.endm
 
 	.macro fifo_level_s3c2410 rd, rx
-		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
+		ldr	\rd, [\rx, # S3C2410_UFSTAT]
 		and	\rd, \rd, #S3C2410_UFSTAT_TXMASK
 	.endm
 
diff --git a/arch/arm/mach-s3c24xx/include/mach/entry-macro.S b/arch/arm/mach-s3c24xx/include/mach/entry-macro.S
index 7615a14..6a21bee 100644
--- a/arch/arm/mach-s3c24xx/include/mach/entry-macro.S
+++ b/arch/arm/mach-s3c24xx/include/mach/entry-macro.S
@@ -31,10 +31,10 @@
 
 		@@ try the interrupt offset register, since it is there
 
-		ldr	\irqstat, [ \base, #INTPND ]
+		ldr	\irqstat, [\base, #INTPND ]
 		teq	\irqstat, #0
 		beq	1002f
-		ldr	\irqnr, [ \base, #INTOFFSET ]
+		ldr	\irqnr, [\base, #INTOFFSET ]
 		mov	\tmp, #1
 		tst	\irqstat, \tmp, lsl \irqnr
 		bne	1001f
diff --git a/arch/arm/mach-s3c24xx/pm-h1940.S b/arch/arm/mach-s3c24xx/pm-h1940.S
index c93bf2d..6183a68 100644
--- a/arch/arm/mach-s3c24xx/pm-h1940.S
+++ b/arch/arm/mach-s3c24xx/pm-h1940.S
@@ -30,4 +30,4 @@
 
 h1940_pm_return:
 	mov	r0, #S3C2410_PA_GPIO
-	ldr	pc, [ r0, #S3C2410_GSTATUS3 - S3C24XX_VA_GPIO ]
+	ldr	pc, [r0, #S3C2410_GSTATUS3 - S3C24XX_VA_GPIO]
diff --git a/arch/arm/mach-s3c24xx/sleep-s3c2410.S b/arch/arm/mach-s3c24xx/sleep-s3c2410.S
index dd5b638..65200ae 100644
--- a/arch/arm/mach-s3c24xx/sleep-s3c2410.S
+++ b/arch/arm/mach-s3c24xx/sleep-s3c2410.S
@@ -45,9 +45,9 @@ ENTRY(s3c2410_cpu_suspend)
 	ldr	r4, =S3C2410_REFRESH
 	ldr	r5, =S3C24XX_MISCCR
 	ldr	r6, =S3C2410_CLKCON
-	ldr	r7, [ r4 ]		@ get REFRESH (and ensure in TLB)
-	ldr	r8, [ r5 ]		@ get MISCCR (and ensure in TLB)
-	ldr	r9, [ r6 ]		@ get CLKCON (and ensure in TLB)
+	ldr	r7, [r4]		@ get REFRESH (and ensure in TLB)
+	ldr	r8, [r5]		@ get MISCCR (and ensure in TLB)
+	ldr	r9, [r6]		@ get CLKCON (and ensure in TLB)
 
 	orr	r7, r7, #S3C2410_REFRESH_SELF	@ SDRAM sleep command
 	orr	r8, r8, #S3C2410_MISCCR_SDSLEEP @ SDRAM power-down signals
@@ -61,8 +61,8 @@ ENTRY(s3c2410_cpu_suspend)
 	@@ align next bit of code to cache line
 	.align	5
 s3c2410_do_sleep:
-	streq	r7, [ r4 ]			@ SDRAM sleep command
-	streq	r8, [ r5 ]			@ SDRAM power-down config
-	streq	r9, [ r6 ]			@ CPU sleep
+	streq	r7, [r4]			@ SDRAM sleep command
+	streq	r8, [r5]			@ SDRAM power-down config
+	streq	r9, [r6]			@ CPU sleep
 1:	beq	1b
 	mov	pc, r14
diff --git a/arch/arm/mach-s3c24xx/sleep-s3c2412.S b/arch/arm/mach-s3c24xx/sleep-s3c2412.S
index c82418e..5adaceb 100644
--- a/arch/arm/mach-s3c24xx/sleep-s3c2412.S
+++ b/arch/arm/mach-s3c24xx/sleep-s3c2412.S
@@ -57,12 +57,12 @@ s3c2412_sleep_enter1:
 	 * retry, as simply returning causes the system to lock.
 	*/
 
-	ldrne	r9, [ r1 ]
-	strne	r9, [ r1 ]
-	ldrne	r9, [ r2 ]
-	strne	r9, [ r2 ]
-	ldrne	r9, [ r3 ]
-	strne	r9, [ r3 ]
+	ldrne	r9, [r1]
+	strne	r9, [r1]
+	ldrne	r9, [r2]
+	strne	r9, [r2]
+	ldrne	r9, [r3]
+	strne	r9, [r3]
 	bne	s3c2412_sleep_enter1
 
 	mov	pc, r14
diff --git a/arch/arm/plat-samsung/include/plat/debug-macro.S b/arch/arm/plat-samsung/include/plat/debug-macro.S
index 207e275..f3a9cff 100644
--- a/arch/arm/plat-samsung/include/plat/debug-macro.S
+++ b/arch/arm/plat-samsung/include/plat/debug-macro.S
@@ -14,12 +14,12 @@
 /* The S5PV210/S5PC110 implementations are as belows. */
 
 	.macro fifo_level_s5pv210 rd, rx
-		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
+		ldr	\rd, [\rx, # S3C2410_UFSTAT]
 		and	\rd, \rd, #S5PV210_UFSTAT_TXMASK
 	.endm
 
 	.macro  fifo_full_s5pv210 rd, rx
-		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
+		ldr	\rd, [\rx, # S3C2410_UFSTAT]
 		tst	\rd, #S5PV210_UFSTAT_TXFULL
 	.endm
 
@@ -27,7 +27,7 @@
  * most widely re-used */
 
 	.macro fifo_level_s3c2440 rd, rx
-		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
+		ldr	\rd, [\rx, # S3C2410_UFSTAT]
 		and	\rd, \rd, #S3C2440_UFSTAT_TXMASK
 	.endm
 
@@ -36,7 +36,7 @@
 #endif
 
 	.macro  fifo_full_s3c2440 rd, rx
-		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
+		ldr	\rd, [\rx, # S3C2410_UFSTAT]
 		tst	\rd, #S3C2440_UFSTAT_TXFULL
 	.endm
 
@@ -45,11 +45,11 @@
 #endif
 
 	.macro	senduart,rd,rx
-		strb 	\rd, [\rx, # S3C2410_UTXH ]
+		strb 	\rd, [\rx, # S3C2410_UTXH]
 	.endm
 
 	.macro	busyuart, rd, rx
-		ldr	\rd, [ \rx, # S3C2410_UFCON ]
+		ldr	\rd, [\rx, # S3C2410_UFCON]
 		tst	\rd, #S3C2410_UFCON_FIFOMODE	@ fifo enabled?
 		beq	1001f				@
 		@ FIFO enabled...
@@ -60,7 +60,7 @@
 
 1001:
 		@ busy waiting for non fifo
-		ldr	\rd, [ \rx, # S3C2410_UTRSTAT ]
+		ldr	\rd, [\rx, # S3C2410_UTRSTAT]
 		tst	\rd, #S3C2410_UTRSTAT_TXFE
 		beq	1001b
 
@@ -68,7 +68,7 @@
 	.endm
 
 	.macro	waituart,rd,rx
-		ldr	\rd, [ \rx, # S3C2410_UFCON ]
+		ldr	\rd, [\rx, # S3C2410_UFCON]
 		tst	\rd, #S3C2410_UFCON_FIFOMODE	@ fifo enabled?
 		beq	1001f				@
 		@ FIFO enabled...
@@ -79,7 +79,7 @@
 		b	1002f
 1001:
 		@ idle waiting for non fifo
-		ldr	\rd, [ \rx, # S3C2410_UTRSTAT ]
+		ldr	\rd, [\rx, # S3C2410_UTRSTAT]
 		tst	\rd, #S3C2410_UTRSTAT_TXFE
 		beq	1001b
 
-- 
1.8.0




More information about the linux-arm-kernel mailing list