[RFC v2 13/18] ARM: OMAP2+: AM33XX: timer: Interchance clkevt and clksrc timers

[Jon Hunter]

Hi Vaibhav,

On 12/31/2012 07:07 AM, Vaibhav Bedia wrote:
> AM33XX has two timers (DTIMER0/1) in the WKUP domain.
> On GP devices the source of DMTIMER0 is fixed to an
> inaccurate internal 32k RC oscillator and this makes
> the DMTIMER0 practically either as a clocksource or
> as clockevent.
> 
> Currently the timer instance in WKUP domain is used
> as the clockevent and the timer in non-WKUP domain
> as the clocksource. DMTIMER1 in WKUP domain can keep
> running in suspend from a 32K clock fed from external
> OSC and can serve as the persistent clock for the kernel.
> To enable this, interchange the timers used as clocksource
> and clockevent for AM33XX.

I have been thinking about this some more. In the case where we are
using gptimers for both clock-events and clock-source (on both AM33xx
and OMAP) and I am wondering if it makes sense to switch the timers so
that we use the always-on timer for clock-source and a different one
from clock-events.

For OMAP, if we are not using the 32k-sync for clock-source, then we are
never going to achieve low power states during idle as we will always
have one gptimer running. And in this case, to your point below, it
would be better to use the always-on for clock-source so that in suspend
we can at least hit low power states and maintain time.

> For now a new DT property has been added to allow the timer code
> to select the timer with the right property.
> 
> It has been pointed out by Santosh Shilimkar and Kevin Hilman
> that such a change will result in soc-idle never being achieved
> on AM33XX. There are other reasons why soc-idle does not look
> feasible on AM33XX so for now we go ahead with the interchange
> of the the timers. If at a later point of time we do come up
> with an approach which makes soc-idle possible on AM33XX, this
> can be revisited.

Right, but this would also be true for OMAP if we don't use the 32k-sync
as we only have one gptimer in the wake-up domain.

Cheers
Jon