[RFC PATCH 3/6] ARM: kirkwood: nsa310: cleanup includes and unneeded code

[Jason Cooper]

On Thu, Jan 24, 2013 at 06:50:52AM +0100, Andrew Lunn wrote:
> On Wed, Jan 23, 2013 at 11:34:21PM +0000, Jason Cooper wrote:
> > Signed-off-by: Jason Cooper <jason at lakedaemon.net>
> > ---
> >  arch/arm/mach-kirkwood/board-nsa310.c | 9 +--------
> >  1 file changed, 1 insertion(+), 8 deletions(-)
> > 
> > diff --git a/arch/arm/mach-kirkwood/board-nsa310.c b/arch/arm/mach-kirkwood/board-nsa310.c
> > index 1bd328d..0b99533 100644
> > --- a/arch/arm/mach-kirkwood/board-nsa310.c
> > +++ b/arch/arm/mach-kirkwood/board-nsa310.c
> > @@ -10,11 +10,8 @@
> >  
> >  #include <linux/kernel.h>
> >  #include <linux/init.h>
> > -#include <linux/i2c.h>
> > -
> > -#include <asm/mach-types.h>
> > -#include <asm/mach/arch.h>
> >  #include <mach/kirkwood.h>
> > +#include <linux/of.h>
> >  #include "common.h"
> >  #include "mpp.h"
> >  
> > @@ -40,11 +37,7 @@ static unsigned int nsa310_mpp_config[] __initdata = {
> >  
> >  void __init nsa310_init(void)
> >  {
> > -	u32 dev, rev;
> > -
> >  	kirkwood_mpp_conf(nsa310_mpp_config);
> > -
> > -	kirkwood_pcie_id(&dev, &rev);
> >  }
> >  
> >  static int __init nsa310_pci_init(void)
> > -- 
> > 1.8.1.1
> > 
> 
> Hi Jason, Tero
> 
> This board is rather unusual for a Kirkwood. It has no Ethernet
> interfaces. Is this correct?

Found this [1], it details some mpp we don't have, and a hwmon
interface.  No mention of ethernet, though. :-/  Apparently there's a
buzzer attached to mpp44, fun.

[2] for the nsa320 does initialize it.  Apparently auto-negotiation in
borked?

thx,

Jason.

[1] https://github.com/peeter123/linux-nsa320/blob/master/arch/arm/mach-kirkwood/nsa310-setup.c
[2] https://github.com/peeter123/linux-nsa320/blob/master/arch/arm/mach-kirkwood/nsa320-setup.c