[PATCH] ARM: DTS: exynos5250-arndale: Add initial board support file

Sachin Kamat sachin.kamat at linaro.org
Thu Jan 24 01:44:50 EST 2013


Hi Tushar,

Just a couple of minor comments.

On 24 January 2013 11:46, Tushar Behera <tushar.behera at linaro.org> wrote:
> From: Girish K S <ks.giri at samsung.com>
>
> Arndale is a low cost board based on the Samsung Exynos5250 SoC. This
> patch adds initial device tree support for this board.
>
> Signed-off-by: Girish K S <ks.giri at samsung.com>
> Signed-off-by: Tushar Behera <tushar.behera at linaro.org>
> ---
>  arch/arm/boot/dts/Makefile               |    1 +
>  arch/arm/boot/dts/exynos5250-arndale.dts |  124 ++++++++++++++++++++++++++++++
>  2 files changed, 125 insertions(+), 0 deletions(-)
>  create mode 100644 arch/arm/boot/dts/exynos5250-arndale.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 5ebb44f..60a9e52 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -44,6 +44,7 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
>         exynos4210-trats.dtb \
>         exynos4412-smdk4412.dtb \
>         exynos5250-smdk5250.dtb \
> +       exynos5250-arndale.dtb \

I think this entry could be moved one step up for maintaining
alphabetical order.

>         exynos5250-snow.dtb \
>         exynos5440-ssdk5440.dtb
>  dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb \
> diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
> new file mode 100644
> index 0000000..7504cf3
> --- /dev/null
> +++ b/arch/arm/boot/dts/exynos5250-arndale.dts
> @@ -0,0 +1,124 @@
> +/*
> + * Samsung's Exynos5250 based Arndale board device tree source
> + *
> + * Copyright (c) 2012 Samsung Electronics Co., Ltd.

2013?

> + *             http://www.samsung.com
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> +*/
> +
> +/dts-v1/;
> +/include/ "exynos5250.dtsi"
> +
> +/ {
> +       model = "Insignal Arndale evaluation board based on EXYNOS5250";
> +       compatible = "insignal,arndale", "samsung,exynos5250";
> +
> +       memory {
> +               reg = <0x40000000 0x80000000>;
> +       };
> +
> +       chosen {
> +               bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc";

This could be resticted only to console
                bootargs = "console=ttySAC2,115200";


> +       };
> +
> +       i2c at 12C60000 {
> +               status = "disabled";
> +       };
> +
> +       i2c at 12C70000 {
> +               status = "disabled";
> +       };
> +
> +       i2c at 12C80000 {
> +               status = "disabled";
> +       };
> +
> +       i2c at 12C90000 {
> +               status = "disabled";
> +       };
> +
> +       i2c at 12CA0000 {
> +               status = "disabled";
> +       };
> +
> +       i2c at 12CB0000 {
> +               status = "disabled";
> +       };
> +
> +       i2c at 12CC0000 {
> +               status = "disabled";
> +       };
> +
> +       i2c at 12CD0000 {
> +               status = "disabled";
> +       };
> +
> +       i2c at 121D0000 {
> +               status = "disabled";
> +       };
> +
> +       dwmmc_0: dwmmc0 at 12200000 {
> +               num-slots = <1>;
> +               supports-highspeed;
> +               broken-cd;
> +               fifo-depth = <0x80>;
> +               card-detect-delay = <200>;
> +               samsung,dw-mshc-ciu-div = <3>;
> +               samsung,dw-mshc-sdr-timing = <2 3>;
> +               samsung,dw-mshc-ddr-timing = <1 2>;
> +
> +               slot at 0 {
> +                       reg = <0>;
> +                       bus-width = <8>;
> +                       gpios = <&gpc0 0 2 0 3>, <&gpc0 1 2 0 3>,
> +                               <&gpc1 0 2 3 3>, <&gpc1 1 2 3 3>,
> +                               <&gpc1 2 2 3 3>, <&gpc1 3 2 3 3>,
> +                               <&gpc0 3 2 3 3>, <&gpc0 4 2 3 3>,
> +                               <&gpc0 5 2 3 3>, <&gpc0 6 2 3 3>;
> +               };
> +       };
> +
> +       dwmmc_1: dwmmc1 at 12210000 {
> +               status = "disabled";
> +       };
> +
> +       dwmmc_2: dwmmc2 at 12220000 {
> +               num-slots = <1>;
> +               supports-highspeed;
> +               fifo-depth = <0x80>;
> +               card-detect-delay = <200>;
> +               samsung,dw-mshc-ciu-div = <3>;
> +               samsung,dw-mshc-sdr-timing = <2 3>;
> +               samsung,dw-mshc-ddr-timing = <1 2>;
> +
> +               slot at 0 {
> +                       reg = <0>;
> +                       bus-width = <4>;
> +                       samsung,cd-pinmux-gpio = <&gpc3 2 2 3 3>;
> +                       gpios = <&gpc3 0 2 0 3>, <&gpc3 1 2 0 3>,
> +                               <&gpc3 3 2 3 3>, <&gpc3 4 2 3 3>,
> +                               <&gpc3 5 2 3 3>, <&gpc3 6 2 3 3>,
> +                               <&gpc4 3 3 3 3>, <&gpc4 3 3 3 3>,
> +                               <&gpc4 5 3 3 3>, <&gpc4 6 3 3 3>;
> +               };
> +       };
> +
> +       dwmmc_3: dwmmc3 at 12230000 {
> +               status = "disabled";
> +       };
> +
> +       spi_0: spi at 12d20000 {
> +               status = "disabled";
> +       };
> +
> +       spi_1: spi at 12d30000 {
> +               status = "disabled";
> +       };
> +
> +       spi_2: spi at 12d40000 {
> +               status = "disabled";
> +       };
> +};
> --
> 1.7.4.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html



-- 
With warm regards,
Sachin



More information about the linux-arm-kernel mailing list