[PATCH v3] arm: mvebu: add DTS file for Marvell RD-A370-A1 board

[Jason Cooper]

On Mon, Jan 14, 2013 at 03:47:32PM +0100, Florian Fainelli wrote:
> This patch adds the DTS file to support the Marvell RD-A370-A1
> (Reference Design board) also known as RD-88F6710 board. It is almost
> entirely similar to the DB-A370 except on the following points:
> 
> - second Ethernet MAC is connected to a switch using RGMII
> - it only has 512MB of physical RAM
> - SDIO interface is enabled and working by default (no need for jumpers)
> 
> Signed-off-by: Florian Fainelli <florian at openwrt.org>
> ---
> Jason,
> 
> This is rebased against your mvebu/for-next branch, can you please drop v2 of
> the previous patch and take this one instead? Thanks!
> 
> Changes since v2:
> - rebased against Jason's mvebu/for-next
> - added SDIO bindings
> - changed commit message a bit
> 
> Changes since v1:
> - added missing entry in arch/arm/boot/dts/Makefile to actually build the DTB
> 
>  arch/arm/boot/dts/Makefile          |    1 +
>  arch/arm/boot/dts/armada-370-rd.dts |   68 +++++++++++++++++++++++++++++++++++
>  2 files changed, 69 insertions(+)
>  create mode 100644 arch/arm/boot/dts/armada-370-rd.dts

Applied to mvebu/dt

thx,

Jason.