[PATCH 2/2] ARM: dts: imx51-babbage: Add at24c512b eeprom support

[Liu Ying]

2013/1/23 Sascha Hauer <s.hauer at pengutronix.de>:
> On Wed, Jan 23, 2013 at 02:32:44PM +0800, Liu Ying wrote:
>> This patch adds at24c512b i2c device to the device tree
>> along with the necessary i2c device node and pinctrl
>> settings for i2c bus.
>> The eeprom chip is populated on the accessory board of
>> the imx51-babbage board.
>
> Given that it's optional should the binding be here anyway? I don't have
> this accessory board and this may conflict with the boards other people
> have connected on this port.
>
> Sascha

Understand your concern. Is there any way to handle this? How can we support
the present accessory board correctly? More generally, not all main boards can
figure out what kind of accessory board is attached to them, at least, some main
boards can only figure out limited number of accessory boards by using some ways
of board ID check.

>
>>
>> Signed-off-by: Liu Ying <Ying.Liu at freescale.com>
>> ---
>>  arch/arm/boot/dts/imx51-babbage.dts |   12 ++++++++++++
>>  arch/arm/boot/dts/imx51.dtsi        |    9 +++++++++
>>  2 files changed, 21 insertions(+), 0 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts
>> index 567e7ee..4f0fc75 100644
>> --- a/arch/arm/boot/dts/imx51-babbage.dts
>> +++ b/arch/arm/boot/dts/imx51-babbage.dts
>> @@ -241,6 +241,18 @@
>>                               };
>>                       };
>>
>> +                     i2c at 83fc8000 { /* I2C1 */
>> +                             pinctrl-names = "default";
>> +                             pinctrl-0 = <&pinctrl_i2c1_1>;
>> +                             status = "okay";
>> +
>> +                             at24 at 50 {
>> +                                     compatible = "at24,24c512b";
>> +                                     pagesize = <128>;
>> +                                     reg = <0x50>;
>> +                             };
>> +                     };
>> +
>>                       audmux at 83fd0000 {
>>                               pinctrl-names = "default";
>>                               pinctrl-0 = <&pinctrl_audmux_1>;
>> diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi
>> index 1f5d45e..6495c69 100644
>> --- a/arch/arm/boot/dts/imx51.dtsi
>> +++ b/arch/arm/boot/dts/imx51.dtsi
>> @@ -311,6 +311,15 @@
>>                                       };
>>                               };
>>
>> +                             i2c1 {
>> +                                     pinctrl_i2c1_1: i2c1grp-1 {
>> +                                             fsl,pins = <
>> +                                                     4  0x400001ed   /* MX51_PAD_EIM_D16__I2C1_SDA */
>> +                                                     23 0x400001ed   /* MX51_PAD_EIM_D19__I2C1_SCL */
>> +                                             >;
>> +                                     };
>> +                             };
>> +
>>                               i2c2 {
>>                                       pinctrl_i2c2_1: i2c2grp-1 {
>>                                               fsl,pins = <
>> --
>> 1.7.1
>>
>>
>>
>
> --
> Pengutronix e.K.                           |                             |
> Industrial Linux Solutions                 | http://www.pengutronix.de/  |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |



-- 
Best Regards,
Liu Ying