[PATCH 2/2] ARM: dts: imx51-babbage: Add at24c512b eeprom support

[Liu Ying]

This patch adds at24c512b i2c device to the device tree
along with the necessary i2c device node and pinctrl
settings for i2c bus.
The eeprom chip is populated on the accessory board of
the imx51-babbage board.

Signed-off-by: Liu Ying <Ying.Liu at freescale.com>
---
 arch/arm/boot/dts/imx51-babbage.dts |   12 ++++++++++++
 arch/arm/boot/dts/imx51.dtsi        |    9 +++++++++
 2 files changed, 21 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts
index 567e7ee..4f0fc75 100644
--- a/arch/arm/boot/dts/imx51-babbage.dts
+++ b/arch/arm/boot/dts/imx51-babbage.dts
@@ -241,6 +241,18 @@
 				};
 			};
 
+			i2c at 83fc8000 { /* I2C1 */
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c1_1>;
+				status = "okay";
+
+				at24 at 50 {
+					compatible = "at24,24c512b";
+					pagesize = <128>;
+					reg = <0x50>;
+				};
+			};
+
 			audmux at 83fd0000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_audmux_1>;
diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi
index 1f5d45e..6495c69 100644
--- a/arch/arm/boot/dts/imx51.dtsi
+++ b/arch/arm/boot/dts/imx51.dtsi
@@ -311,6 +311,15 @@
 					};
 				};
 
+				i2c1 {
+					pinctrl_i2c1_1: i2c1grp-1 {
+						fsl,pins = <
+							4  0x400001ed	/* MX51_PAD_EIM_D16__I2C1_SDA */
+							23 0x400001ed	/* MX51_PAD_EIM_D19__I2C1_SCL */
+						>;
+					};
+				};
+
 				i2c2 {
 					pinctrl_i2c2_1: i2c2grp-1 {
 						fsl,pins = <
-- 
1.7.1