[PATCH] ARM: shmobile: ipmmu: Add basic PMB support

[Laurent Pinchart]

Hi Damian,

On Tuesday 22 January 2013 11:31:51 Damian Hobson-Garcia wrote:
> On 2013/01/21 22:12, Laurent Pinchart wrote:
> > On Friday 18 January 2013 15:35:10 Damian Hobson-Garcia wrote:
> >> The PMB can be used to remap 16, 64, 128 or 512 MiB pages from
> >> the 0x80000000-0xffffffff address range to anywhere in the
> >> 0x00000000-0x7fffffff range.
> > 
> > Isn't it 0x80000000 - 0xbfffffff to 0x00000000 - 0xffffffff ?
> 
> Yes, looking again at the spec, your values are the correct ones.
> 
> >> It also has the ability to perform tiled-linear address translation,
> >> which can be used to access a memory buffer as a series of n x m tiles,
> >> useful for image encoding/decoding.
> >> Currently only the userspace API via character device is supported.
> > 
> > If I understand this correctly, you're allowing userspace to remap a
> > virtual address block to a physical address block without performing any
> > sanity check. Isn't that a major security issue ?
> 
> No, not really. The PMB will only remap physical addresses, not virtual
> addresses.  Moreover, the remapped address is only accessible from the
> IP blocks which are on the ICB bus, not the CPU.  I will update the
> comment to mention this.  These IP blocks already have access to the
> entire physical memory address space, so I don't think that adding the
> the PMB into mix introduces any new security issues.

The IP block will be programmed through a driver that will control where it 
writes to/reads from. Adding the PMB will remap those read/write operations 
without notifying the driver, opening the door to potential issues.

What are the use cases for controlling the PMB from userspace ?

> ...
> 
> >> +
> >> +#define PMB_DEVICE_NAME "pmb"
> >> +
> >> +#define PMB_NR 16
> >> +/* the smallest size that can be reserverd in the pmb */
> >> +#define PMB_GRANULARITY (16 << 20)
> >> +#define PMB_START_ADDR	0x80000000
> >> +#define PMB_SIZE	0x40000000
> >> +#define NUM_BITS(x)	((x) / PMB_GRANULARITY)
> >> +#define NR_BITMAPS	((NUM_BITS(PMB_SIZE) + BITS_PER_LONG - 1) \
> >> +				>> ilog2(BITS_PER_LONG))
> > 
> > Does ilog2(BITS_PER_LONG) resolve to a compile-time constant ?
> 
> Yes it does.
> 
> Thanks for your other comments too.  I'll look into making those changes.

-- 
Regards,

Laurent Pinchart