[PATCH] ARM: dts: add mshc controller node for Exynos4x12 SoCs

Thomas Abraham thomas.abraham at linaro.org
Tue Jan 22 18:25:11 EST 2013


Hi Dongjin,

On 22 January 2013 10:15, Dongjin Kim <tobetter at gmail.com> wrote:
> Hi Thomas,
>
> Good to see your patch, actually I had sent similar one before but no
> one care my patch. And now I feel it seems to be wrong.
>
> But I have a couple of question if I use your patch to enable MSHC
> controller work properly on Exynos4412.
>
> What's the exact form of ".compatible" on board file?
> With your patch, MSHC is not probed at all in my board. The
> ".compatible" has to be 'samsung,exynos5250-dw-mshc' and it works.
>
> I also tried '.compatible = "samsung,exynos5250-dw-mshc",
> "samsung,exynos4412-dw-mshc"', it probes the driver but in the
> function 'dw_mci_exynos_priv_init', priv->ctrl_type always becomes
> DW_MCI_TYPE_EXYNOS5250. Because there is a loop and returns each
> compatible strings in alphanumeric order whatever it is ordered in the
> board file.
>
> I also tried below patch to add a compatible for Exynos4412 to
> 'dw_mci_exynos_match' with its specific data, and it works. What's the
> right direction? If I am missing something or wrong, please correct
> me. :)

Yes, your below patch is the correct thing to do. The dt patches for
dwmmc controller driver were only tested on Exynos5250 based board. So
I had not added the compatible string for Exynos4412 in
'of_match_table' of the driver. Please submit the below change as a
patch (minor comment below).

>
> Many thanks,
> Dongjin.
>
> @@ -184,6 +186,25 @@ static int dw_mci_exynos_setup_bus(struct dw_mci *host,
>         return 0;
>  }
>
> +/* Exynos4412 controller specific capabilities */
> +static unsigned long exynos4412_dwmmc_caps[4] = {
> +       MMC_CAP_UHS_DDR50 | MMC_CAP_1_8V_DDR |
> +               MMC_CAP_8_BIT_DATA | MMC_CAP_CMD23,
> +       MMC_CAP_CMD23,
> +       MMC_CAP_CMD23,
> +       MMC_CAP_CMD23,
> +};

Since this is same as the 'exynos5250_dwmmc_caps', it can be reused
for 4412 as well, avoiding duplicate copy 'exynos4412_dwmmc_caps'.

> +
> +static const struct dw_mci_drv_data exynos4412_drv_data = {
> +       .caps                   = exynos4412_dwmmc_caps,
> +       .init                   = dw_mci_exynos_priv_init,
> +       .setup_clock            = dw_mci_exynos_setup_clock,
> +       .prepare_command        = dw_mci_exynos_prepare_command,
> +       .set_ios                = dw_mci_exynos_set_ios,
> +       .parse_dt               = dw_mci_exynos_parse_dt,
> +       .setup_bus              = dw_mci_exynos_setup_bus,
> +};

If the above change is done, 'exynos4412_drv_data ' also could be avoided.

> +
>  /* Exynos5250 controller specific capabilities */
>  static unsigned long exynos5250_dwmmc_caps[4] = {
>         MMC_CAP_UHS_DDR50 | MMC_CAP_1_8V_DDR |
> @@ -204,6 +225,8 @@ static const struct dw_mci_drv_data exynos5250_drv_data = {
>  };
>
>  static const struct of_device_id dw_mci_exynos_match[] = {
> +       { .compatible = "samsung,exynos4412-dw-mshc",
> +                       .data = &exynos4412_drv_data, },
>         { .compatible = "samsung,exynos5250-dw-mshc",
>                         .data = &exynos5250_drv_data, },
>         {},

Thanks,
Thomas.

>
>
> On Mon, Jan 21, 2013 at 7:39 PM, Thomas Abraham
> <thomas.abraham at linaro.org> wrote:
>> Commit cea0f256 ("ARM: dts: Add board dts file for ODROID-X") includes a node
>> to describe the board level properties for mshc controller. But the mshc
>> controller node was not added in the Exynos4x12 dtsi file which resulted
>> in the following warning when compiling the dtb files.
>>
>> Warning (reg_format): "reg" property in /mshc at 12550000/slot at 0 has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
>> Warning (avoid_default_addr_size): Relying on default #address-cells value for /mshc at 12550000/slot at 0
>> Warning (avoid_default_addr_size): Relying on default #size-cells value for /mshc at 12550000/slot at 0
>>
>> Fix this by adding the mshc controller node for Exynos4x12 SoCs.
>>
>> Cc: Dongjin Kim <tobetter at gmail.com>
>> Cc: Kukjin Kim <kgene.kim at samsung.com>
>> Signed-off-by: Thomas Abraham <thomas.abraham at linaro.org>
>> ---
>>  arch/arm/boot/dts/exynos4412.dtsi |    8 ++++++++
>>  1 files changed, 8 insertions(+), 0 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi
>> index 78ed377..96f5b66 100644
>> --- a/arch/arm/boot/dts/exynos4412.dtsi
>> +++ b/arch/arm/boot/dts/exynos4412.dtsi
>> @@ -32,4 +32,12 @@
>>                 interrupts = <0 57 0>, <0 0 0>, <0 0 0>, <0 0 0>,
>>                              <1 12 0>, <1 12 0>, <1 12 0>, <1 12 0>;
>>         };
>> +
>> +       mshc at 12550000 {
>> +               compatible = "samsung,exynos4412-dw-mshc";
>> +               reg = <0x12550000 0x1000>;
>> +               interrupts = <0 77 0>;
>> +               #address-cells = <1>;
>> +               #size-cells = <0>;
>> +       };
>>  };
>> --
>> 1.7.5.4
>>



More information about the linux-arm-kernel mailing list