OMAP baseline test results for v3.8-rc4

[Mark Jackson]

On 22/01/13 13:32, Bedia, Vaibhav wrote:

<snip>

> Following works for me:
> 
> Kernel
> ===
> git checkout next-20130122
> make distclean
> make omap2plus_defconfig
> <Enable the appended DTB related options via menuconfig>
> make -j7
> cat arch/arm/boot/zImage arch/arm/boot/dts/am335x-bone.dtb > arch/arm/boot/zImage-dtb.am335x-bone
> mkimage -A arm -O linux -C none -T kernel -a 0x80008000 -e 0x80008000 -n 'Linux' -d arch/arm/boot/zImage-dtb.am335x-bone arch/arm/boot/uImage-dtb.am335x-bone
> 
> U-Boot
> ===
> Built from v2013.01

<snip>

> A dumb question... in your case what's the bootargs set? Note that the mainline
> kernel for AM335x doesn't have MMC support yet and the default bootargs is set to
> rootfs on MMC.

Yes ... I'm trying to boot from a rootfs on MMC:-

Kernel command line: console=ttyO0,115200n8 earlyprintk debug root=/dev/mmcblk0p2 ro rootfstype=ext2
rootwait

But I should get *something* from the kernel before it starts trying to access the rootfs ?

Regards
Mark J.