[PATCH] ARM: davinci: da850 evm: pass platform data for adv7343 encoder

[Prabhakar Lad]

Sekhar,

On Tue, Jan 15, 2013 at 1:34 PM, Lad, Prabhakar
<prabhakar.csengg at gmail.com> wrote:
> Without this patch the adv7343 encoder was being set to default
> configuration which caused display not to work on this board.
> This patch passes the necessary platform data required for adv7343
> encoder to work on da850 evm.
>
> Signed-off-by: Lad, Prabhakar <prabhakar.lad at ti.com>
> ---
>  This patch is dependent on http://patchwork.linuxtv.org/patch/16272/
>
Since this patch depends on media [1] , I would like to get this patch
through media tree as fix for 3.8. Could you review and ACK it ?

[1] http://patchwork.linuxtv.org/patch/16391/

Regards,
--Prabhakar

>  arch/arm/mach-davinci/board-da850-evm.c |   13 +++++++++++++
>  1 files changed, 13 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
> index 0299915..d0e3ec3 100644
> --- a/arch/arm/mach-davinci/board-da850-evm.c
> +++ b/arch/arm/mach-davinci/board-da850-evm.c
> @@ -1256,11 +1256,24 @@ static struct vpif_capture_config da850_vpif_capture_config = {
>  };
>
>  /* VPIF display configuration */
> +
> +static struct adv7343_platform_data adv7343_pdata = {
> +       .mode_config = {
> +               .dac_3 = 1,
> +               .dac_2 = 1,
> +               .dac_1 = 1,
> +       },
> +       .sd_config = {
> +               .sd_dac_out1 = 1,
> +       },
> +};
> +
>  static struct vpif_subdev_info da850_vpif_subdev[] = {
>         {
>                 .name = "adv7343",
>                 .board_info = {
>                         I2C_BOARD_INFO("adv7343", 0x2a),
> +                       .platform_data = &adv7343_pdata,
>                 },
>         },
>  };
> --
> 1.7.4.1
>