[PATCH 1/4] ARM: cache-l2x0: Manage the errata at run time

[Santosh Shilimkar]

On Monday 21 January 2013 09:38 PM, Russell King - ARM Linux wrote:
> On Mon, Jan 21, 2013 at 06:44:53PM +0530, srinidhi kasagar wrote:
>> +/*
>> + * Identify ther RTL releases of l2x0 - This might help in applying
>> + * the l2x0 errata's dynamically rather compile time options
>> + */
>> +asmlinkage u32 l2x0_get_rtl_release(void)
>
> Why asmlinkage?
>
>> +{
>> +	return readl_relaxed(l2x0_base + L2X0_CACHE_ID) &
>> +			L2X0_CACHE_ID_RTL_MASK;
>> +}
>> +
>>   static inline void cache_wait_way(void __iomem *reg, unsigned long mask)
>>   {
>>   	/* wait for cache operation by line or way to complete */
>> @@ -87,46 +97,41 @@ static inline void l2x0_inv_line(unsigned long addr)
>>   	writel_relaxed(addr, base + L2X0_INV_LINE_PA);
>>   }
>>
>> -#if defined(CONFIG_PL310_ERRATA_588369) || defined(CONFIG_PL310_ERRATA_727915)
>> -static inline void debug_writel(unsigned long val)
>> +static void debug_writel(unsigned long val)
>>   {
>> -	if (outer_cache.set_debug)
>> -		outer_cache.set_debug(val);
>> +	u32 l2x0_revision = l2x0_get_rtl_release();
>> +
>> +	if (l2x0_revision == L2X0_CACHE_ID_RTL_R3P0 ||
>> +		l2x0_revision == L2X0_CACHE_ID_RTL_R2P0 ||
>> +		l2x0_revision == L2X0_CACHE_ID_RTL_R1P0 ||
>> +		l2x0_revision == L2X0_CACHE_ID_RTL_R0P0)
>> +			if (outer_cache.set_debug)
>> +				outer_cache.set_debug(val);
>
> This needs comments from the TI folk.  Also, change this around - if
> there's no setting for 'set_debug' there's no point reading the rtl
> release and checking it against a set of values.  Added Santosh.
>
Thanks Russell for looping me. 588369 is fixed in r3p0 but 727915
is present. Both has same work around so the version checks are
fine. I agree that moving the version check inside .set_debug check.

Regards
Santosh