[RESEND PATCH v9 0/2] usb: phy: samsung: Introducing usb phy driver for samsung SoCs

[Praveen Paneri]

Hi Felipe,

On Sat, Jan 19, 2013 at 12:16 AM, Felipe Balbi <balbi at ti.com> wrote:
> Hi,
>
> On Fri, Jan 18, 2013 at 02:30:21PM +0530, Praveen Paneri wrote:
>> Changes from v8:
>> Resending this patch series after rebasing to the latest usb-next branch.
>> Rewording inline comments for better readability.
>> Removed IS_ENABLED(CONFIG_OF) as pdev->dev.of_node is enough to check for dt support.
>> Using of_match_ptr to add of_match_table to platform_driver structure.
>> Removed unnecessary variables.
>>
>> Changes from v7:
>> Rebased to the latest usb-next branch.
>> Separating arch patches from these driver patches.
>>
>> Changes from v6:
>> Modified register definitions according to the existing ones.
>> Changed default PHY clk selection for SoCs.
>> Improved binding text and rebased to the latest usb-next.
>>
>> Changes from v5:
>> Moved clk_get() to driver's probe function. Now reference clock frequency
>> selection value is stored in samsung_usbphy structure for later use. Used
>> IS_ENABLED() instead of #ifdef in samsung_usbphy_get_driver_data().
>>
>> Changes from v4:
>> Moved header file contents to driver's source file
>> Removed unnecessary print message from driver's probe function
>> Dropped the Free Software Foundation address from the header
>>
>> Changes from v3:
>> Replaced susbsys_initcall()/module_exit() by module_platform_driver().
>> Accordingly in the hsotg driver returned -EPROBE_DEFER until phy driver
>> is registered
>> Removed unnecessary devm_usb_put_phy() call from the hsotg driver remove.
>>
>> Changes from v2:
>> Changed the driver filenames to samsung-usbphy
>> Rectified coding style related errors
>>
>> Changes from v1:
>> Rebased patches to latest usb-next branch
>> Changed the name 'sec_usbphy' to 'samsung_usbphy'
>>
>> This patch set introduces a phy driver for samsung SoCs. It uses the existing
>> transceiver infrastructure to provide phy control functions. Use of this driver
>> can be extended for usb host phy as well. Over the period of time all the phy
>> related code for most of the samsung SoCs can be integrated here.
>> Removing the existing phy code from mach-s3c64xx. Same can be done for other SoCs
>> when they start supporting this phy driver.
>> This driver is tested with smdk6410 and Exynos4210(with DT).
>>
>> Praveen Paneri (2):
>>   usb: phy: samsung: Introducing usb phy driver for hsotg
>>   usb: s3c-hsotg: Adding phy driver support
>
> Can you check on my xceiv branch if this is applied correctly ?
Yes! It is applied fine.

Thanks :)

Praveen
>
> thanks
>
> --
> balbi