[PATCH v2 4/8] ARM: OMAP2+: twl-common: Allow boards to customize the twl4030 audio setup
Peter Ujfalusi
peter.ujfalusi at ti.com
Fri Jan 18 09:31:52 EST 2013
Boards with special audio routing can pass a custom omap_tw4030_pdata to the
audio machine driver.
At the same time update the board files using the same audio driver.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi at ti.com>
---
arch/arm/mach-omap2/board-cm-t35.c | 2 +-
arch/arm/mach-omap2/board-devkit8000.c | 2 +-
arch/arm/mach-omap2/board-igep0020.c | 2 +-
arch/arm/mach-omap2/board-omap3beagle.c | 2 +-
arch/arm/mach-omap2/board-omap3evm.c | 2 +-
arch/arm/mach-omap2/board-overo.c | 2 +-
arch/arm/mach-omap2/twl-common.c | 22 +++++++++++-----------
arch/arm/mach-omap2/twl-common.h | 3 ++-
8 files changed, 19 insertions(+), 18 deletions(-)
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index b3102c2..eec635e 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -722,7 +722,7 @@ static void __init cm_t3x_common_init(void)
cm_t35_init_ethernet();
cm_t35_init_led();
cm_t35_init_display();
- omap_twl4030_audio_init("cm-t3x");
+ omap_twl4030_audio_init("cm-t3x", NULL);
usb_musb_init(NULL);
cm_t35_init_usbh();
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index 12865af..f0aa64b 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -627,7 +627,7 @@ static void __init devkit8000_init(void)
board_nand_init(devkit8000_nand_partitions,
ARRAY_SIZE(devkit8000_nand_partitions), NAND_CS,
NAND_BUSWIDTH_16, NULL);
- omap_twl4030_audio_init("omap3beagle");
+ omap_twl4030_audio_init("omap3beagle", NULL);
/* Ensure SDRC pins are mux'd for self-refresh */
omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 0f24cb8..d1a7352 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -629,7 +629,7 @@ static void __init igep_init(void)
igep_flash_init();
igep_leds_init();
- omap_twl4030_audio_init("igep2");
+ omap_twl4030_audio_init("igep2", NULL);
/*
* WLAN-BT combo module from MuRata which has a Marvell WLAN
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 22c483d..909e7fa 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -524,7 +524,7 @@ static void __init omap3_beagle_init(void)
board_nand_init(omap3beagle_nand_partitions,
ARRAY_SIZE(omap3beagle_nand_partitions), NAND_CS,
NAND_BUSWIDTH_16, NULL);
- omap_twl4030_audio_init("omap3beagle");
+ omap_twl4030_audio_init("omap3beagle", NULL);
/* Ensure msecure is mux'd to be able to set the RTC. */
omap_mux_init_signal("sys_drm_msecure", OMAP_PIN_OFF_OUTPUT_HIGH);
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index 3985f35..8803b5c 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -744,7 +744,7 @@ static void __init omap3_evm_init(void)
omap3evm_init_smsc911x();
omap3_evm_display_init();
omap3_evm_wl12xx_init();
- omap_twl4030_audio_init("omap3evm");
+ omap_twl4030_audio_init("omap3evm", NULL);
}
MACHINE_START(OMAP3EVM, "OMAP3 EVM")
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index c8fde3e..fe644eb 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -506,7 +506,7 @@ static void __init overo_init(void)
overo_display_init();
overo_init_led();
overo_init_keys();
- omap_twl4030_audio_init("overo");
+ omap_twl4030_audio_init("overo", NULL);
/* Ensure SDRC pins are mux'd for self-refresh */
omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c
index cd1cba8..931495a 100644
--- a/arch/arm/mach-omap2/twl-common.c
+++ b/arch/arm/mach-omap2/twl-common.c
@@ -529,28 +529,28 @@ void __init omap4_pmic_get_config(struct twl4030_platform_data *pmic_data,
#include <linux/platform_data/omap-twl4030.h>
/* Commonly used configuration */
-static struct omap_tw4030_pdata omap_twl4030_audio_data = {
- .has_hs = OMAP_TWL4030_LEFT | OMAP_TWL4030_RIGHT,
- .has_hf = OMAP_TWL4030_LEFT | OMAP_TWL4030_RIGHT,
- .has_linein = OMAP_TWL4030_LEFT | OMAP_TWL4030_RIGHT,
-};
+static struct omap_tw4030_pdata omap_twl4030_audio_data;
static struct platform_device audio_device = {
.name = "omap-twl4030",
.id = -1,
- .dev = {
- .platform_data = &omap_twl4030_audio_data,
- },
};
-void __init omap_twl4030_audio_init(char *card_name)
+void __init omap_twl4030_audio_init(char *card_name,
+ struct omap_tw4030_pdata *pdata)
{
- omap_twl4030_audio_data.card_name = card_name;
+ if (!pdata)
+ pdata = &omap_twl4030_audio_data;
+
+ pdata->card_name = card_name;
+
+ audio_device.dev.platform_data = pdata;
platform_device_register(&audio_device);
}
#else /* SOC_OMAP_TWL4030 */
-void __init omap_twl4030_audio_init(char *card_name)
+void __init omap_twl4030_audio_init(char *card_name,
+ struct omap_tw4030_pdata *pdata)
{
return;
}
diff --git a/arch/arm/mach-omap2/twl-common.h b/arch/arm/mach-omap2/twl-common.h
index dcfbad5..24b65d0 100644
--- a/arch/arm/mach-omap2/twl-common.h
+++ b/arch/arm/mach-omap2/twl-common.h
@@ -32,6 +32,7 @@
struct twl4030_platform_data;
struct twl6040_platform_data;
+struct omap_tw4030_pdata;
struct i2c_board_info;
void omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq,
@@ -60,6 +61,6 @@ void omap3_pmic_get_config(struct twl4030_platform_data *pmic_data,
void omap4_pmic_get_config(struct twl4030_platform_data *pmic_data,
u32 pdata_flags, u32 regulators_flags);
-void omap_twl4030_audio_init(char *card_name);
+void omap_twl4030_audio_init(char *card_name, struct omap_tw4030_pdata *pdata);
#endif /* __OMAP_PMIC_COMMON__ */
--
1.8.1
More information about the linux-arm-kernel
mailing list