[PATCH v6 21/22] mfd: omap-usb-host: Don't spam console on clk_set_parent failure

[Roger Quadros]

clk_set_parent is expected to fail on OMAP3 platforms. We don't
consider that as fatal so don't spam console.

Signed-off-by: Roger Quadros <rogerq at ti.com>
---
 drivers/mfd/omap-usb-host.c |   18 +++++++++---------
 1 files changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
index 38ec73d..56b6f69 100644
--- a/drivers/mfd/omap-usb-host.c
+++ b/drivers/mfd/omap-usb-host.c
@@ -668,32 +668,32 @@ static int usbhs_omap_probe(struct platform_device *pdev)
 	}
 
 	if (is_ehci_phy_mode(pdata->port_mode[0])) {
-		/* for OMAP3 , the clk set paretn fails */
+		/* for OMAP3, clk_set_parent fails */
 		ret = clk_set_parent(omap->utmi_p1_gfclk,
 					omap->xclk60mhsp1_ck);
 		if (ret != 0)
-			dev_err(dev, "xclk60mhsp1_ck set parent"
-				"failed error:%d\n", ret);
+			dev_dbg(dev, "xclk60mhsp1_ck set parent failed: %d\n",
+					ret);
 	} else if (is_ehci_tll_mode(pdata->port_mode[0])) {
 		ret = clk_set_parent(omap->utmi_p1_gfclk,
 					omap->init_60m_fclk);
 		if (ret != 0)
-			dev_err(dev, "init_60m_fclk set parent"
-				"failed error:%d\n", ret);
+			dev_dbg(dev, "P0 init_60m_fclk set parent failed: %d\n",
+					ret);
 	}
 
 	if (is_ehci_phy_mode(pdata->port_mode[1])) {
 		ret = clk_set_parent(omap->utmi_p2_gfclk,
 					omap->xclk60mhsp2_ck);
 		if (ret != 0)
-			dev_err(dev, "xclk60mhsp2_ck set parent"
-					"failed error:%d\n", ret);
+			dev_dbg(dev, "xclk60mhsp2_ck set parent failed: %d\n",
+					ret);
 	} else if (is_ehci_tll_mode(pdata->port_mode[1])) {
 		ret = clk_set_parent(omap->utmi_p2_gfclk,
 						omap->init_60m_fclk);
 		if (ret != 0)
-			dev_err(dev, "init_60m_fclk set parent"
-				"failed error:%d\n", ret);
+			dev_dbg(dev, "P1 init_60m_fclk set parent failed: %d\n",
+					ret);
 	}
 
 	omap_usbhs_init(dev);
-- 
1.7.4.1