[PATCH V4 0/3] ARM: davinci: da850: add pinctrl support

[Kumar, Anil]

This set of patches adds:

* Add pinctrl-single for handling Padconf registers.
* Add NAND node to export NAND functionality on da850 EVM.
* Add NAND pinctrl node to do pin mux according to pinctrl-single driver.


This series applies on top of tag next-20130107 git tree
https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
and the following patch

 -drivers/pinctrl: grab default handles from device core
  https://patchwork.kernel.org/patch/1862231/

This series is tested on da850 EVM.

Changes since V3:

 -Move NAND related pinctrl DT data into the da850.dtsi file so it can
  be reused.
 
Changes since V2:

 -Move NAND pins configuration into the nand_cs3 DT node to avoid pins
  configuration if it is not probed.

Changes since V1:

 -Remove the binding documentation as already documented as part of
  Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt
 -Enable PINCTRL Kconfig for MACH_DA8XX_DT platform only.
 -Fix the pinctrl driver node unit-address.
 -Make separate patch for da8xx_omapl_defconfig changes.

Kumar, Anil (3):
  ARM: davinci: da850: add pinctrl driver DT entries
  ARM: davinci: da8xx defconfig: enable pinctrl config option
  ARM: davinci: da850: add NAND driver DT entries

 arch/arm/boot/dts/da850-evm.dts        |    8 ++++++
 arch/arm/boot/dts/da850.dtsi           |   40 ++++++++++++++++++++++++++++++++
 arch/arm/configs/da8xx_omapl_defconfig |    1 +
 arch/arm/mach-davinci/Kconfig          |    1 +
 4 files changed, 50 insertions(+), 0 deletions(-)

-- 
1.7.4.1