[PATCH 06/16] ARM: b.L: generic SMP secondary bringup and hotplug support

[Dave Martin]

On Mon, Jan 14, 2013 at 11:51:11AM -0500, Nicolas Pitre wrote:
> On Mon, 14 Jan 2013, Will Deacon wrote:
> 
> > On Thu, Jan 10, 2013 at 12:20:41AM +0000, Nicolas Pitre wrote:
> > > Now that the b.L power API is in place, we can use it for SMP secondary
> > > bringup and CPU hotplug in a generic fashion.
> > 
> > [...]
> > 
> > > diff --git a/arch/arm/common/bL_platsmp.c b/arch/arm/common/bL_platsmp.c
> > > new file mode 100644
> > > index 0000000000..0acb9f4685
> > > --- /dev/null
> > > +++ b/arch/arm/common/bL_platsmp.c
> > > @@ -0,0 +1,79 @@
> > > +/*
> > > + * linux/arch/arm/mach-vexpress/bL_platsmp.c
> > > + *
> > > + * Created by:  Nicolas Pitre, November 2012
> > > + * Copyright:   (C) 2012  Linaro Limited
> > > + *
> > > + * This program is free software; you can redistribute it and/or modify
> > > + * it under the terms of the GNU General Public License version 2 as
> > > + * published by the Free Software Foundation.
> > > + *
> > > + * Code to handle secondary CPU bringup and hotplug for the bL power API.
> > > + */
> > > +
> > > +#include <linux/init.h>
> > > +#include <linux/smp.h>
> > > +
> > > +#include <asm/bL_entry.h>
> > > +#include <asm/smp_plat.h>
> > > +#include <asm/hardware/gic.h>
> > > +
> > > +static void __init simple_smp_init_cpus(void)
> > > +{
> > > +	set_smp_cross_call(gic_raise_softirq);
> > > +}
> > > +
> > > +static int __cpuinit bL_boot_secondary(unsigned int cpu, struct task_struct *idle)
> > > +{
> > > +	unsigned int pcpu, pcluster, ret;
> > > +	extern void secondary_startup(void);
> > > +
> > > +	pcpu = cpu_logical_map(cpu) & 0xff;
> > > +	pcluster = (cpu_logical_map(cpu) >> 8) & 0xff;
> > 
> > Again, you can probably use Lorenzo's helpers here.
> 
> Yes, that goes for the whole series.
> 
> > > +	pr_debug("%s: logical CPU %d is physical CPU %d cluster %d\n",
> > > +		 __func__, cpu, pcpu, pcluster);
> > > +
> > > +	bL_set_entry_vector(pcpu, pcluster, NULL);
> > 
> > Now that you don't have a barrier in this function, you need one here.
> 
> Hmmm... Why?

In effect, we are entering a critical section here: that's precisely
why we close the gate.

We need a barrier after bL_set_entry_vector() to make sure that no
operations from the critical section leak outside from the
perspective of the target CPU.

Similarly, we need a barrier before bL_set_entry_vector() when
opening the gate.

The corresponding barrier required in bL_head.S at bL_entry_gated
is added by my recent barriers and tidyups series.


Closing and opening the gate are a bit like taking and releasing
a lock -- which is one reason for having simple wrapper functions
to make these roles more obvious.

> 
> > > +	ret = bL_cpu_power_up(pcpu, pcluster);
> > > +	if (ret)
> > > +		return ret;
> > 
> > and here, although I confess to not understanding why you write NULL the
> > first time.
> 
> If for some reasons the bL_cpu_power_up() call fails, I don't want this 
> CPU to suddenly decide to enter the kernel if it wakes up at a later 
> time when secondary_startup is not ready to deal with it anymore.
> 
> > > +	bL_set_entry_vector(pcpu, pcluster, secondary_startup);
> > > +	gic_raise_softirq(cpumask_of(cpu), 0);
> > > +	sev();
> > 
> > This relise on the event register being able to be set if the target is in a
> > low-power (wfi) state. I'd feel safer with a dsb before the sev...

The sev() signals the update to the entry vector, which has already been
DSB'd by the flushing in bL_set_entry_vector().

Also, the relative order of gic_raise_softirq() and sev() here is
not important, provided they both follow bL_set_entry_vector().

There are no circumstances under which we could know whether the
IRQ or SEV arrives first at the destination CPU anyway.  A DSB is
insufficient since the store may still not have arrived at the GIC;
but even doing a readback from the GIC isn't enough, because the
relationships and relative speed of the underlying interrupt and
SEV signalling mechanisms are not architecturally visible.

The crucial thing is that the SEV does not arrive before the destination
CPU has observed the modification to the entry vector -- that could
cause the target CPU to stall in WFE.

If the CPU powers up after missing the SEV, that's fine, because the
observability of the non-NULL entry vector is guaranteed by the
flushing which precedes gic_raise_softirq().  SEV is only important
if the CPU powers up early, observes a NULL entry vector and goes
into WFE.

Because this code only applies with the multiprocessing extensions,
we know that the writes associated with gic_raise_softirq() will
drain and take effect eventually, but we don't care when.  We
can't know the results for sure until the target CPU re-enters the
kernel.

Cheers
---Dave