[PATCH 15/16] ARM: vexpress/dcscb: handle platform coherency exit/setup and CCI

[Dave Martin]

On Tue, Jan 15, 2013 at 11:53:14AM +0530, Santosh Shilimkar wrote:
> On Monday 14 January 2013 05:55 PM, Lorenzo Pieralisi wrote:
> >On Sat, Jan 12, 2013 at 07:21:24AM +0000, Santosh Shilimkar wrote:
> >>On Saturday 12 January 2013 12:58 AM, Nicolas Pitre wrote:
> >>>On Fri, 11 Jan 2013, Santosh Shilimkar wrote:
> >>>
> >>>>On Thursday 10 January 2013 05:50 AM, Nicolas Pitre wrote:
> >>>>>From: Dave Martin <dave.martin at linaro.org>
> >>>>>
> >>>>>+		/*
> >>>>>+		 * Flush the local CPU cache.
> >>>>>+		 *
> >>>>>+		 * A15/A7 can hit in the cache with SCTLR.C=0, so we don't need
> >>>>>+		 * a preliminary flush here for those CPUs.  At least, that's
> >>>>>+		 * the theory -- without the extra flush, Linux explodes on
> >>>>>+		 * RTSM (maybe not needed anymore, to be investigated).
> >>>>>+		 */
> >>>>This is expected if the entire code is not in one stack frame and the
> >>>>additional flush is needed to avoid possible stack corruption. This
> >>>>issue has been discussed in past on the list.
> >>>
> >>>I missed that.  Do you have a reference or pointer handy?
> >>>
> >>>What is strange is that this is 100% reproducible on RTSM while this
> >>>apparently is not an issue on real hardware so far.
> >>>
> >>I tried searching archives and realized the discussion was in private
> >>email thread. There are some bits and pieces on list but not all the
> >>information.
> >>
> >>The main issue RMK pointed out is- An additional L1 flush needed
> >>to avoid the effective change of view of memory when the C bit is
> >>turned off, and the cache is no longer searched for local CPU accesses.
> >>
> >>In your case dcscb_power_down() has updated the stack which can be hit
> >>in cache line and hence cache is dirty now. Then cpu_proc_fin() clears
> >>the C-bit and hence for sub sequent calls the L1 cache won't be
> >>searched. You then call flush_cache_all() which again updates the
> >>stack but avoids searching the L1 cache. So it overwrites previous
> >>saved stack frame. This seems to be an issue in your case as well.
> >
> >On A15/A7 even with the C bit cleared the D-cache is searched, the
> >situation above cannot happen and if it does we are facing a HW/model bug.
> >If this code is run on A9 then we have a problem since there, when the C bit
> >is cleared D-cache is not searched (and that's why the sequence above
> >should be written in assembly with no data access whatsoever), but on
> >A15/A7 we do not.
> >
> Good point. May be model has modeled A9 and not A15 but in either
> case, lets be consistent for all ARMv7 machines at least to avoid
> people debugging similar issues. Many machines share code for ARMv7
> processors so the best things is to stick to the sequence which works
> across all ARMv7 processors.

Is it sufficient to clarify the comment to indicate that the code is
not directly reusable for other CPU combinations?

DCSCB is incredibly platform-specific, and we would not expect to
see it in other platforms.

Or do we consider the risk of people copying this code verbatim
(including the "do not copy this code" comment) too high?

Cheers
---Dave