[PATCH] ARM: remove unnecessary 'select GENERIC_GPIO'

[Shawn Guo]

The only use of GENERIC_GPIO (defined by architecture) in GPIO subsystem
is being selected by GPIOLIB.  Also there are no any use of the option
at architecture level. Only two sub-architectures shmobile and orion
really use the option as below.

  arch/arm/mach-shmobile/Makefile:obj-$(CONFIG_GENERIC_GPIO)      += $(pfc-y)
  arch/arm/plat-orion/Makefile:orion-gpio-$(CONFIG_GENERIC_GPIO) += gpio.o

Remove all those unnecessary sub-architecture level selection of
GENERIC_GPIO, which are there only for confusing people.

Signed-off-by: Shawn Guo <shawn.guo at linaro.org>
---
 arch/arm/Kconfig                |    9 ---------
 arch/arm/mach-bcm/Kconfig       |    1 -
 arch/arm/mach-picoxcell/Kconfig |    1 -
 arch/arm/mach-vt8500/Kconfig    |    1 -
 4 files changed, 12 deletions(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 67874b8..c217521 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -347,7 +347,6 @@ config ARCH_BCM2835
 	select COMMON_CLK
 	select CPU_V6
 	select GENERIC_CLOCKEVENTS
-	select GENERIC_GPIO
 	select MULTI_IRQ_HANDLER
 	select PINCTRL
 	select PINCTRL_BCM2835
@@ -644,7 +643,6 @@ config ARCH_TEGRA
 	select CLKSRC_MMIO
 	select COMMON_CLK
 	select GENERIC_CLOCKEVENTS
-	select GENERIC_GPIO
 	select HAVE_CLK
 	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
@@ -744,7 +742,6 @@ config ARCH_S3C24XX
 	select ARCH_HAS_CPUFREQ
 	select ARCH_USES_GETTIMEOFFSET
 	select CLKDEV_LOOKUP
-	select GENERIC_GPIO
 	select HAVE_CLK
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
@@ -787,7 +784,6 @@ config ARCH_S5P64X0
 	select CLKSRC_MMIO
 	select CPU_V6
 	select GENERIC_CLOCKEVENTS
-	select GENERIC_GPIO
 	select HAVE_CLK
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
@@ -802,7 +798,6 @@ config ARCH_S5PC100
 	select ARCH_USES_GETTIMEOFFSET
 	select CLKDEV_LOOKUP
 	select CPU_V7
-	select GENERIC_GPIO
 	select HAVE_CLK
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
@@ -820,7 +815,6 @@ config ARCH_S5PV210
 	select CLKSRC_MMIO
 	select CPU_V7
 	select GENERIC_CLOCKEVENTS
-	select GENERIC_GPIO
 	select HAVE_CLK
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
@@ -838,7 +832,6 @@ config ARCH_EXYNOS
 	select CLKDEV_LOOKUP
 	select CPU_V7
 	select GENERIC_CLOCKEVENTS
-	select GENERIC_GPIO
 	select HAVE_CLK
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
@@ -873,7 +866,6 @@ config ARCH_U300
 	select COMMON_CLK
 	select CPU_ARM926T
 	select GENERIC_CLOCKEVENTS
-	select GENERIC_GPIO
 	select HAVE_TCM
 	select SPARSE_IRQ
 	help
@@ -957,7 +949,6 @@ config ARCH_VT8500_SINGLE
 	select COMMON_CLK
 	select CPU_ARM926T
 	select GENERIC_CLOCKEVENTS
-	select GENERIC_GPIO
 	select HAVE_CLK
 	select MULTI_IRQ_HANDLER
 	select SPARSE_IRQ
diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
index 48705c1..bf02471 100644
--- a/arch/arm/mach-bcm/Kconfig
+++ b/arch/arm/mach-bcm/Kconfig
@@ -7,7 +7,6 @@ config ARCH_BCM
 	select ARM_GIC
 	select CPU_V7
 	select GENERIC_CLOCKEVENTS
-	select GENERIC_GPIO
 	select GENERIC_TIME
 	select GPIO_BCM
 	select SPARSE_IRQ
diff --git a/arch/arm/mach-picoxcell/Kconfig b/arch/arm/mach-picoxcell/Kconfig
index 868796f..13bae78 100644
--- a/arch/arm/mach-picoxcell/Kconfig
+++ b/arch/arm/mach-picoxcell/Kconfig
@@ -7,7 +7,6 @@ config ARCH_PICOXCELL
 	select DW_APB_TIMER
 	select DW_APB_TIMER_OF
 	select GENERIC_CLOCKEVENTS
-	select GENERIC_GPIO
 	select HAVE_TCM
 	select NO_IOPORT
 	select SPARSE_IRQ
diff --git a/arch/arm/mach-vt8500/Kconfig b/arch/arm/mach-vt8500/Kconfig
index 2ed0b7d..8464497 100644
--- a/arch/arm/mach-vt8500/Kconfig
+++ b/arch/arm/mach-vt8500/Kconfig
@@ -6,7 +6,6 @@ config ARCH_VT8500
 	select CLKDEV_LOOKUP
 	select CPU_ARM926T
 	select GENERIC_CLOCKEVENTS
-	select GENERIC_GPIO
 	select HAVE_CLK
 	help
 	  Support for VIA/WonderMedia VT8500/WM85xx System-on-Chip.
-- 
1.7.9.5