[PATCH 06/26] mfd: ab8500-sysctrl: Provide configuration for SysClkReqRfClkBuf registers

[Lee Jones]

From: Kennet Wallden <kennet.wallden at stericsson.com>

Add the possibility to pass configuration settings for
SysCl1kReqRfClkBuf to SysClk8ReqRfClkBuf via platform data.

Signed-off-by: Lee Jones <lee.jones at linaro.org>
Signed-off-by: Kennet Wallden <kennet.wallden at stericsson.com>
Reviewed-by: Karl-Johan PERNTZ <karl-johan.perntz at stericsson.com>
Reviewed-by: Bengt JONSSON <bengt.g.jonsson at stericsson.com>
---
 drivers/mfd/ab8500-sysctrl.c              |   25 +++++++++++++++++++++++++
 include/linux/mfd/abx500/ab8500-sysctrl.h |    5 +++++
 include/linux/mfd/abx500/ab8500.h         |    2 ++
 3 files changed, 32 insertions(+)

diff --git a/drivers/mfd/ab8500-sysctrl.c b/drivers/mfd/ab8500-sysctrl.c
index cf58f69..19a024e 100644
--- a/drivers/mfd/ab8500-sysctrl.c
+++ b/drivers/mfd/ab8500-sysctrl.c
@@ -113,11 +113,36 @@ int ab8500_sysctrl_write(u16 reg, u8 mask, u8 value)
 static int __devinit ab8500_sysctrl_probe(struct platform_device *pdev)
 {
 	struct ab8500_platform_data *plat;
+	struct ab8500_sysctrl_platform_data *pdata;
 
 	sysctrl_dev = &pdev->dev;
 	plat = dev_get_platdata(pdev->dev.parent);
 	if (plat->pm_power_off)
 		pm_power_off = ab8500_power_off;
+
+	pdata = plat->sysctrl;
+
+	if (pdata) {
+		int ret;
+		int i;
+		int j;
+		for (i = AB8500_SYSCLKREQ1RFCLKBUF;
+		     i <= AB8500_SYSCLKREQ8RFCLKBUF; i++) {
+			j = i - AB8500_SYSCLKREQ1RFCLKBUF;
+			ret = ab8500_sysctrl_write(i, 0xff,
+						   pdata->initial_req_buf_config[j]);
+			dev_dbg(&pdev->dev,
+				"Setting SysClkReq%dRfClkBuf 0x%X\n",
+				j + 1,
+				pdata->initial_req_buf_config[j]);
+			if (ret < 0) {
+				dev_err(&pdev->dev,
+					"unable to set sysClkReq%dRfClkBuf: "
+					"%d\n", j + 1, ret);
+			}
+		}
+	}
+
 	return 0;
 }
 
diff --git a/include/linux/mfd/abx500/ab8500-sysctrl.h b/include/linux/mfd/abx500/ab8500-sysctrl.h
index 10eb509..ebf12e7 100644
--- a/include/linux/mfd/abx500/ab8500-sysctrl.h
+++ b/include/linux/mfd/abx500/ab8500-sysctrl.h
@@ -37,6 +37,11 @@ static inline int ab8500_sysctrl_clear(u16 reg, u8 bits)
 	return ab8500_sysctrl_write(reg, bits, 0);
 }
 
+/* Configuration data for SysClkReq1RfClkBuf - SysClkReq8RfClkBuf */
+struct ab8500_sysctrl_platform_data {
+	u8 initial_req_buf_config[8];
+};
+
 /* Registers */
 #define AB8500_TURNONSTATUS		0x100
 #define AB8500_RESETSTATUS		0x101
diff --git a/include/linux/mfd/abx500/ab8500.h b/include/linux/mfd/abx500/ab8500.h
index 96840c4..3f4e6d1 100644
--- a/include/linux/mfd/abx500/ab8500.h
+++ b/include/linux/mfd/abx500/ab8500.h
@@ -270,6 +270,7 @@ struct regulator_reg_init;
 struct regulator_init_data;
 struct ab8500_gpio_platform_data;
 struct ab8500_codec_platform_data;
+struct ab8500_sysctrl_platform_data;
 
 /**
  * struct ab8500_platform_data - AB8500 platform data
@@ -291,6 +292,7 @@ struct ab8500_platform_data {
 	struct regulator_init_data *regulator;
 	struct ab8500_gpio_platform_data *gpio;
 	struct ab8500_codec_platform_data *codec;
+	struct ab8500_sysctrl_platform_data *sysctrl;
 };
 
 extern int __devinit ab8500_init(struct ab8500 *ab8500,
-- 
1.7.9.5