[PATCH RFT 3/3] ARM: tegra: dts: seaboard: enable keyboard

[Stephen Warren]

On 01/14/2013 03:09 PM, Stephen Warren wrote:
> On 01/12/2013 03:02 AM, Laxman Dewangan wrote:
>> On Saturday 12 January 2013 04:39 AM, Stephen Warren wrote:
>>> On 01/11/2013 06:33 AM, Laxman Dewangan wrote:
>>>> Enable tegra based keyboard controller and populate the key matrix for
>>>> seaboard. The key matrix was originally on driver code which is removed
>>>> to have clean driver. The key mapping is now passed through dts file.
>>>>
>>>> Signed-off-by: Laxman Dewangan <ldewangan at nvidia.com>
>>>> ---
>>>> Requesting for testing on seaboard.
>>>> I generated this patch as Stephen suggested to have one patch for dt
>>>> file
>>>> entry for keys on seaboard.
>>
>> Thanks for testing.

>>> Once I hacked around the above issues, the driver doesn't work very well
>>> at all. There is a *long* delay between when I press a key and when it
>>> shows up (e.g. echo'd to the HDMI console). When I release the key the
>>> same keypress is generated twice. Or perhaps it's a repeat, but since
>>> it's *always* 2 extra keypresses and I doubt I always hold my finger on
>>> the key the exact same amount of time, I think it's key release that
>>> does this not repeat. I assume this would repro on any board, so you
>>> won't need Seaboard to debug it. Harmony is able to read the keyboard
>>> using the KBC.
>>>
>>> Even with the above, I was able to validate that the keymap in the
>>> Seaboard .dts file looks reasonable.
>>>
>>> However, please fix the KBC driver...
>>
>> I did not see any issue with the 3x3 matrix. I think all these about is
>> to tuning debaunce and other parameter also. Another thing is that to
>> make sure that all pinmuxes are properly configured.
> 
> OK, I'll go look at some downstream kernels for Seaboard and see if the
> debounce etc. parameters all match up.

How odd. The problems were indeed solved by using the downstream
debounce/... timings. It's odd that using a shorter debounce time leads
to /not/ generating spurious keypress events; perhaps the HW is buggy
for the extremely large debounce value that you chose.

I also noticed that one entry in the keymap had a typo.

Can you please roll the patch below into yours:

diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts
b/arch/arm/boot/dts/tegra20-seaboard.dts
index b22522d..2e87330 100644
--- a/arch/arm/boot/dts/tegra20-seaboard.dts
+++ b/arch/arm/boot/dts/tegra20-seaboard.dts
@@ -614,8 +614,9 @@

        kbc {
                status = "okay";
-               nvidia,debounce-delay-ms = <640>;
-               nvidia,repeat-delay-ms = <1>;
+               nvidia,debounce-delay-ms = <32>;
+               nvidia,repeat-delay-ms = <160>;
+               nvidia,ghost-filter;
                nvidia,kbc-row-pins = <0 1 2 3 4 5 6 7 8 9 10 11 12 13
14 15>;
                nvidia,kbc-col-pins = <16 17 18 19 20 21 22 23>;
                linux,keymap = <0x00020011      /* KEY_W */
@@ -672,7 +673,7 @@
                                0x0805002A      /* KEY_LEFTSHIFT */

                                0x09050061      /* KEY_RIGHTCTRL */
-                               0x0907001B      /* KEY_LEFTCTRL */
+                               0x0907001D      /* KEY_LEFTCTRL */

                                0x0B00001A      /* KEY_LEFTBRACE */
                                0x0B010019      /* KEY_P */