[PATCH 0/3] at91: PMECC: enable PMECC in dt for at91sam9x5ek, at91sam9n12ek
Josh Wu
josh.wu at atmel.com
Mon Jan 14 04:01:52 EST 2013
Ping? Any feedback for these patches?
On 12/19/2012 6:27 PM, Josh Wu wrote:
> Those patches will enable PMECC in dt parameters for at91sam9x5ek, at91sam9n12ek.
>
> Josh Wu (3):
> MTD: at91: atmel_nand: for PMECC, add code to choose the ecc bits and
> sector size according to the ONFI parameter ECC requirement.
> at91: 9x5: add DT parameters to enable PMECC
> at91: at91sam9n12: add DT parameters to enable PMECC
>
> arch/arm/boot/dts/at91sam9n12.dtsi | 1 +
> arch/arm/boot/dts/at91sam9n12ek.dts | 5 +-
> arch/arm/boot/dts/at91sam9x5.dtsi | 4 ++
> arch/arm/boot/dts/at91sam9x5cm.dtsi | 5 +-
> drivers/mtd/nand/atmel_nand.c | 89 +++++++++++++++++++++++++++++++++++
> 5 files changed, 102 insertions(+), 2 deletions(-)
>
Best Regards,
Josh Wu
More information about the linux-arm-kernel
mailing list