[PATCH v2 1/1] usb: fsl-mxc-udc: fix build error due to mach/hardware.h
Peter Chen
peter.chen at freescale.com
Mon Jan 14 02:18:17 EST 2013
It changes the driver to use platform_device_id rather than cpu_is_xxx
to determine the SoC type, and updates the platform code accordingly.
Compile ok at imx_v6_v7_defconfig with CONFIG_USB_FSL_USB2 enable.
Tested at mx51 bbg board, it works ok after enable phy clock
(Need another patch to fix this problem)
Signed-off-by: Peter Chen <peter.chen at freescale.com>
---
Changes for v2:
- Add const for fsl_udc_devtype
- Do ioremap for phy address at fsl-mxc-udc
arch/arm/mach-imx/clk-imx25.c | 6 +-
arch/arm/mach-imx/clk-imx27.c | 6 +-
arch/arm/mach-imx/clk-imx31.c | 6 +-
arch/arm/mach-imx/clk-imx35.c | 6 +-
arch/arm/mach-imx/clk-imx51-imx53.c | 6 +-
arch/arm/mach-imx/devices/devices-common.h | 1 +
arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c | 15 +++---
drivers/usb/gadget/fsl_mxc_udc.c | 23 +++++----
drivers/usb/gadget/fsl_udc_core.c | 52 +++++++++++++-------
drivers/usb/gadget/fsl_usb2_udc.h | 13 ++++--
include/linux/fsl_devices.h | 8 +++
11 files changed, 87 insertions(+), 55 deletions(-)
diff --git a/arch/arm/mach-imx/clk-imx25.c b/arch/arm/mach-imx/clk-imx25.c
index b197aa7..67e353d 100644
--- a/arch/arm/mach-imx/clk-imx25.c
+++ b/arch/arm/mach-imx/clk-imx25.c
@@ -254,9 +254,9 @@ int __init mx25_clocks_init(void)
clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.2");
clk_register_clkdev(clk[usbotg_ahb], "ahb", "mxc-ehci.2");
clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.2");
- clk_register_clkdev(clk[ipg], "ipg", "fsl-usb2-udc");
- clk_register_clkdev(clk[usbotg_ahb], "ahb", "fsl-usb2-udc");
- clk_register_clkdev(clk[usb_div], "per", "fsl-usb2-udc");
+ clk_register_clkdev(clk[ipg], "ipg", "imx-udc-mx25");
+ clk_register_clkdev(clk[usbotg_ahb], "ahb", "imx-udc-mx25");
+ clk_register_clkdev(clk[usb_div], "per", "imx-udc-mx25");
clk_register_clkdev(clk[nfc_ipg_per], NULL, "imx25-nand.0");
/* i.mx25 has the i.mx35 type cspi */
clk_register_clkdev(clk[cspi1_ipg], NULL, "imx35-cspi.0");
diff --git a/arch/arm/mach-imx/clk-imx27.c b/arch/arm/mach-imx/clk-imx27.c
index 4c1d1e4..1ffe3b5 100644
--- a/arch/arm/mach-imx/clk-imx27.c
+++ b/arch/arm/mach-imx/clk-imx27.c
@@ -236,9 +236,9 @@ int __init mx27_clocks_init(unsigned long fref)
clk_register_clkdev(clk[lcdc_ahb_gate], "ahb", "imx21-fb.0");
clk_register_clkdev(clk[csi_ahb_gate], "ahb", "imx27-camera.0");
clk_register_clkdev(clk[per4_gate], "per", "imx27-camera.0");
- clk_register_clkdev(clk[usb_div], "per", "fsl-usb2-udc");
- clk_register_clkdev(clk[usb_ipg_gate], "ipg", "fsl-usb2-udc");
- clk_register_clkdev(clk[usb_ahb_gate], "ahb", "fsl-usb2-udc");
+ clk_register_clkdev(clk[usb_div], "per", "imx-udc-mx27");
+ clk_register_clkdev(clk[usb_ipg_gate], "ipg", "imx-udc-mx27");
+ clk_register_clkdev(clk[usb_ahb_gate], "ahb", "imx-udc-mx27");
clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.0");
clk_register_clkdev(clk[usb_ipg_gate], "ipg", "mxc-ehci.0");
clk_register_clkdev(clk[usb_ahb_gate], "ahb", "mxc-ehci.0");
diff --git a/arch/arm/mach-imx/clk-imx31.c b/arch/arm/mach-imx/clk-imx31.c
index 8be64e0..ef66eaf 100644
--- a/arch/arm/mach-imx/clk-imx31.c
+++ b/arch/arm/mach-imx/clk-imx31.c
@@ -139,9 +139,9 @@ int __init mx31_clocks_init(unsigned long fref)
clk_register_clkdev(clk[usb_div_post], "per", "mxc-ehci.2");
clk_register_clkdev(clk[usb_gate], "ahb", "mxc-ehci.2");
clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.2");
- clk_register_clkdev(clk[usb_div_post], "per", "fsl-usb2-udc");
- clk_register_clkdev(clk[usb_gate], "ahb", "fsl-usb2-udc");
- clk_register_clkdev(clk[ipg], "ipg", "fsl-usb2-udc");
+ clk_register_clkdev(clk[usb_div_post], "per", "imx-udc-mx31");
+ clk_register_clkdev(clk[usb_gate], "ahb", "imx-udc-mx31");
+ clk_register_clkdev(clk[ipg], "ipg", "imx-udc-mx31");
clk_register_clkdev(clk[csi_gate], NULL, "mx3-camera.0");
/* i.mx31 has the i.mx21 type uart */
clk_register_clkdev(clk[uart1_gate], "per", "imx21-uart.0");
diff --git a/arch/arm/mach-imx/clk-imx35.c b/arch/arm/mach-imx/clk-imx35.c
index 66f3d65..69fe9c8 100644
--- a/arch/arm/mach-imx/clk-imx35.c
+++ b/arch/arm/mach-imx/clk-imx35.c
@@ -251,9 +251,9 @@ int __init mx35_clocks_init()
clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.2");
clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.2");
clk_register_clkdev(clk[usbotg_gate], "ahb", "mxc-ehci.2");
- clk_register_clkdev(clk[usb_div], "per", "fsl-usb2-udc");
- clk_register_clkdev(clk[ipg], "ipg", "fsl-usb2-udc");
- clk_register_clkdev(clk[usbotg_gate], "ahb", "fsl-usb2-udc");
+ clk_register_clkdev(clk[usb_div], "per", "imx-udc-mx35");
+ clk_register_clkdev(clk[ipg], "ipg", "imx-udc-mx35");
+ clk_register_clkdev(clk[usbotg_gate], "ahb", "imx-udc-mx35");
clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0");
clk_register_clkdev(clk[nfc_div], NULL, "imx25-nand.0");
clk_register_clkdev(clk[csi_gate], NULL, "mx3-camera.0");
diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c
index 579023f..fb7cb84 100644
--- a/arch/arm/mach-imx/clk-imx51-imx53.c
+++ b/arch/arm/mach-imx/clk-imx51-imx53.c
@@ -269,9 +269,9 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil,
clk_register_clkdev(clk[usboh3_per_gate], "per", "mxc-ehci.2");
clk_register_clkdev(clk[usboh3_gate], "ipg", "mxc-ehci.2");
clk_register_clkdev(clk[usboh3_gate], "ahb", "mxc-ehci.2");
- clk_register_clkdev(clk[usboh3_per_gate], "per", "fsl-usb2-udc");
- clk_register_clkdev(clk[usboh3_gate], "ipg", "fsl-usb2-udc");
- clk_register_clkdev(clk[usboh3_gate], "ahb", "fsl-usb2-udc");
+ clk_register_clkdev(clk[usboh3_per_gate], "per", "imx-udc-mx51");
+ clk_register_clkdev(clk[usboh3_gate], "ipg", "imx-udc-mx51");
+ clk_register_clkdev(clk[usboh3_gate], "ahb", "imx-udc-mx51");
clk_register_clkdev(clk[nfc_gate], NULL, "imx51-nand");
clk_register_clkdev(clk[ssi1_ipg_gate], NULL, "imx-ssi.0");
clk_register_clkdev(clk[ssi2_ipg_gate], NULL, "imx-ssi.1");
diff --git a/arch/arm/mach-imx/devices/devices-common.h b/arch/arm/mach-imx/devices/devices-common.h
index 6277baf..9bd5777 100644
--- a/arch/arm/mach-imx/devices/devices-common.h
+++ b/arch/arm/mach-imx/devices/devices-common.h
@@ -63,6 +63,7 @@ struct platform_device *__init imx_add_flexcan(
#include <linux/fsl_devices.h>
struct imx_fsl_usb2_udc_data {
+ const char *devid;
resource_size_t iobase;
resource_size_t irq;
};
diff --git a/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c b/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c
index 37e4439..fb527c7 100644
--- a/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c
+++ b/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c
@@ -11,35 +11,36 @@
#include "../hardware.h"
#include "devices-common.h"
-#define imx_fsl_usb2_udc_data_entry_single(soc) \
+#define imx_fsl_usb2_udc_data_entry_single(soc, _devid) \
{ \
+ .devid = _devid, \
.iobase = soc ## _USB_OTG_BASE_ADDR, \
.irq = soc ## _INT_USB_OTG, \
}
#ifdef CONFIG_SOC_IMX25
const struct imx_fsl_usb2_udc_data imx25_fsl_usb2_udc_data __initconst =
- imx_fsl_usb2_udc_data_entry_single(MX25);
+ imx_fsl_usb2_udc_data_entry_single(MX25, "imx-udc-mx25");
#endif /* ifdef CONFIG_SOC_IMX25 */
#ifdef CONFIG_SOC_IMX27
const struct imx_fsl_usb2_udc_data imx27_fsl_usb2_udc_data __initconst =
- imx_fsl_usb2_udc_data_entry_single(MX27);
+ imx_fsl_usb2_udc_data_entry_single(MX27, "imx-udc-mx27");
#endif /* ifdef CONFIG_SOC_IMX27 */
#ifdef CONFIG_SOC_IMX31
const struct imx_fsl_usb2_udc_data imx31_fsl_usb2_udc_data __initconst =
- imx_fsl_usb2_udc_data_entry_single(MX31);
+ imx_fsl_usb2_udc_data_entry_single(MX31, "imx-udc-mx31");
#endif /* ifdef CONFIG_SOC_IMX31 */
#ifdef CONFIG_SOC_IMX35
const struct imx_fsl_usb2_udc_data imx35_fsl_usb2_udc_data __initconst =
- imx_fsl_usb2_udc_data_entry_single(MX35);
+ imx_fsl_usb2_udc_data_entry_single(MX35, "imx-udc-mx35");
#endif /* ifdef CONFIG_SOC_IMX35 */
#ifdef CONFIG_SOC_IMX51
const struct imx_fsl_usb2_udc_data imx51_fsl_usb2_udc_data __initconst =
- imx_fsl_usb2_udc_data_entry_single(MX51);
+ imx_fsl_usb2_udc_data_entry_single(MX51, "imx-udc-mx51");
#endif
struct platform_device *__init imx_add_fsl_usb2_udc(
@@ -57,7 +58,7 @@ struct platform_device *__init imx_add_fsl_usb2_udc(
.flags = IORESOURCE_IRQ,
},
};
- return imx_add_platform_device_dmamask("fsl-usb2-udc", -1,
+ return imx_add_platform_device_dmamask(data->devid, -1,
res, ARRAY_SIZE(res),
pdata, sizeof(*pdata), DMA_BIT_MASK(32));
}
diff --git a/drivers/usb/gadget/fsl_mxc_udc.c b/drivers/usb/gadget/fsl_mxc_udc.c
index 1b0f086..0e858e6 100644
--- a/drivers/usb/gadget/fsl_mxc_udc.c
+++ b/drivers/usb/gadget/fsl_mxc_udc.c
@@ -18,17 +18,16 @@
#include <linux/platform_device.h>
#include <linux/io.h>
-#include <mach/hardware.h>
-
static struct clk *mxc_ahb_clk;
static struct clk *mxc_per_clk;
static struct clk *mxc_ipg_clk;
/* workaround ENGcm09152 for i.MX35 */
-#define USBPHYCTRL_OTGBASE_OFFSET 0x608
+#define MX35_USBPHYCTRL_OFFSET 0x600
+#define USBPHYCTRL_OTGBASE_OFFSET 0x8
#define USBPHYCTRL_EVDO (1 << 23)
-int fsl_udc_clk_init(struct platform_device *pdev)
+int fsl_udc_clk_init(enum fsl_udc_type devtype, struct platform_device *pdev)
{
struct fsl_usb2_platform_data *pdata;
unsigned long freq;
@@ -59,7 +58,7 @@ int fsl_udc_clk_init(struct platform_device *pdev)
clk_prepare_enable(mxc_per_clk);
/* make sure USB_CLK is running at 60 MHz +/- 1000 Hz */
- if (!cpu_is_mx51()) {
+ if (!(devtype == IMX51_UDC)) {
freq = clk_get_rate(mxc_per_clk);
if (pdata->phy_mode != FSL_USB2_PHY_ULPI &&
(freq < 59999000 || freq > 60001000)) {
@@ -79,20 +78,22 @@ eclkrate:
return ret;
}
-void fsl_udc_clk_finalize(struct platform_device *pdev)
+void fsl_udc_clk_finalize(enum fsl_udc_type devtype,
+ struct platform_device *pdev)
{
struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
- if (cpu_is_mx35()) {
+ if (devtype == IMX35_UDC) {
unsigned int v;
+ void __iomem *phy_regs = ioremap((unsigned long)pdata->regs +
+ MX35_USBPHYCTRL_OFFSET, 512);
/* workaround ENGcm09152 for i.MX35 */
if (pdata->workaround & FLS_USB2_WORKAROUND_ENGCM09152) {
- v = readl(MX35_IO_ADDRESS(MX35_USB_BASE_ADDR +
- USBPHYCTRL_OTGBASE_OFFSET));
+ v = readl(phy_regs + USBPHYCTRL_OTGBASE_OFFSET);
writel(v | USBPHYCTRL_EVDO,
- MX35_IO_ADDRESS(MX35_USB_BASE_ADDR +
- USBPHYCTRL_OTGBASE_OFFSET));
+ phy_regs + USBPHYCTRL_OTGBASE_OFFSET);
}
+ iounmap(phy_regs);
}
/* ULPI transceivers don't need usbpll */
diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c
index c19f7f1..c32119b 100644
--- a/drivers/usb/gadget/fsl_udc_core.c
+++ b/drivers/usb/gadget/fsl_udc_core.c
@@ -41,6 +41,7 @@
#include <linux/fsl_devices.h>
#include <linux/dmapool.h>
#include <linux/delay.h>
+#include <linux/of_device.h>
#include <asm/byteorder.h>
#include <asm/io.h>
@@ -2438,17 +2439,13 @@ static int __init fsl_udc_probe(struct platform_device *pdev)
unsigned int i;
u32 dccparams;
- if (strcmp(pdev->name, driver_name)) {
- VDBG("Wrong device");
- return -ENODEV;
- }
-
udc_controller = kzalloc(sizeof(struct fsl_udc), GFP_KERNEL);
if (udc_controller == NULL) {
ERR("malloc udc failed\n");
return -ENOMEM;
}
+ udc_controller->devtype = pdev->id_entry->driver_data;
pdata = pdev->dev.platform_data;
udc_controller->pdata = pdata;
spin_lock_init(&udc_controller->lock);
@@ -2505,7 +2502,7 @@ static int __init fsl_udc_probe(struct platform_device *pdev)
#endif
/* Initialize USB clocks */
- ret = fsl_udc_clk_init(pdev);
+ ret = fsl_udc_clk_init(udc_controller->devtype, pdev);
if (ret < 0)
goto err_iounmap_noclk;
@@ -2547,7 +2544,7 @@ static int __init fsl_udc_probe(struct platform_device *pdev)
dr_controller_setup(udc_controller);
}
- fsl_udc_clk_finalize(pdev);
+ fsl_udc_clk_finalize(udc_controller->devtype, pdev);
/* Setup gadget structure */
udc_controller->gadget.ops = &fsl_gadget_ops;
@@ -2756,22 +2753,41 @@ static int fsl_udc_otg_resume(struct device *dev)
return fsl_udc_resume(NULL);
}
-
/*-------------------------------------------------------------------------
Register entry point for the peripheral controller driver
--------------------------------------------------------------------------*/
-
+static const struct platform_device_id fsl_udc_devtype[] = {
+ {
+ .name = "imx-udc-mx25",
+ .driver_data = IMX25_UDC,
+ }, {
+ .name = "imx-udc-mx27",
+ .driver_data = IMX27_UDC,
+ }, {
+ .name = "imx-udc-mx31",
+ .driver_data = IMX31_UDC,
+ }, {
+ .name = "imx-udc-mx35",
+ .driver_data = IMX35_UDC,
+ }, {
+ .name = "imx-udc-mx51",
+ .driver_data = IMX51_UDC,
+ }
+};
+MODULE_DEVICE_TABLE(platform, fsl_udc_devtype);
static struct platform_driver udc_driver = {
- .remove = __exit_p(fsl_udc_remove),
+ .remove = __exit_p(fsl_udc_remove),
+ /* Just for FSL i.mx SoC currently */
+ .id_table = fsl_udc_devtype,
/* these suspend and resume are not usb suspend and resume */
- .suspend = fsl_udc_suspend,
- .resume = fsl_udc_resume,
- .driver = {
- .name = (char *)driver_name,
- .owner = THIS_MODULE,
- /* udc suspend/resume called from OTG driver */
- .suspend = fsl_udc_otg_suspend,
- .resume = fsl_udc_otg_resume,
+ .suspend = fsl_udc_suspend,
+ .resume = fsl_udc_resume,
+ .driver = {
+ .name = (char *)driver_name,
+ .owner = THIS_MODULE,
+ /* udc suspend/resume called from OTG driver */
+ .suspend = fsl_udc_otg_suspend,
+ .resume = fsl_udc_otg_resume,
},
};
diff --git a/drivers/usb/gadget/fsl_usb2_udc.h b/drivers/usb/gadget/fsl_usb2_udc.h
index f61a967..bc1f6d0 100644
--- a/drivers/usb/gadget/fsl_usb2_udc.h
+++ b/drivers/usb/gadget/fsl_usb2_udc.h
@@ -505,6 +505,8 @@ struct fsl_udc {
u32 ep0_dir; /* Endpoint zero direction: can be
USB_DIR_IN or USB_DIR_OUT */
u8 device_address; /* Device USB address */
+ /* devtype for kinds of SoC, only i.mx uses it now */
+ enum fsl_udc_type devtype;
};
/*-------------------------------------------------------------------------*/
@@ -591,15 +593,18 @@ static inline struct ep_queue_head *get_qh_by_ep(struct fsl_ep *ep)
struct platform_device;
#ifdef CONFIG_ARCH_MXC
-int fsl_udc_clk_init(struct platform_device *pdev);
-void fsl_udc_clk_finalize(struct platform_device *pdev);
+int fsl_udc_clk_init(enum fsl_udc_type devtype, struct platform_device *pdev);
+void fsl_udc_clk_finalize(enum fsl_udc_type devtype,
+ struct platform_device *pdev);
void fsl_udc_clk_release(void);
#else
-static inline int fsl_udc_clk_init(struct platform_device *pdev)
+static inline int fsl_udc_clk_init(enum fsl_udc_type devtype,
+ struct platform_device *pdev)
{
return 0;
}
-static inline void fsl_udc_clk_finalize(struct platform_device *pdev)
+static inline void fsl_udc_clk_finalize(enum fsl_udc_type devtype,
+ struct platform_device *pdev)
{
}
static inline void fsl_udc_clk_release(void)
diff --git a/include/linux/fsl_devices.h b/include/linux/fsl_devices.h
index a82296a..7cb3fe0 100644
--- a/include/linux/fsl_devices.h
+++ b/include/linux/fsl_devices.h
@@ -66,6 +66,14 @@ enum fsl_usb2_phy_modes {
FSL_USB2_PHY_SERIAL,
};
+enum fsl_udc_type {
+ IMX25_UDC,
+ IMX27_UDC,
+ IMX31_UDC,
+ IMX35_UDC,
+ IMX51_UDC,
+};
+
struct clk;
struct platform_device;
--
1.7.0.4
More information about the linux-arm-kernel
mailing list