[PATCH 4/4] serial: tty: Cleanup code using devm_ function

[Tony Prisk]

Convert the last memory allocation (vt8500_port) to use devm_kzalloc
and remove the fail path cleanup code from vt8500_serial_probe.

Reorder iomem mapping above clk_enable to simplify fail code. The
clock is only enabled if all other resources are available.

Signed-off-by: Tony Prisk <linux at prisktech.co.nz>
---
 drivers/tty/serial/vt8500_serial.c |   23 ++++++++---------------
 1 file changed, 8 insertions(+), 15 deletions(-)

diff --git a/drivers/tty/serial/vt8500_serial.c b/drivers/tty/serial/vt8500_serial.c
index 7de279a..1ddae81 100644
--- a/drivers/tty/serial/vt8500_serial.c
+++ b/drivers/tty/serial/vt8500_serial.c
@@ -589,7 +589,8 @@ static int vt8500_serial_probe(struct platform_device *pdev)
 		return -EBUSY;
 	}
 
-	vt8500_port = kzalloc(sizeof(struct vt8500_port), GFP_KERNEL);
+	vt8500_port = devm_kzalloc(&pdev->dev, sizeof(struct vt8500_port),
+				   GFP_KERNEL);
 	if (!vt8500_port)
 		return -ENOMEM;
 
@@ -603,28 +604,25 @@ static int vt8500_serial_probe(struct platform_device *pdev)
 	vt8500_port->uart.dev = &pdev->dev;
 	vt8500_port->uart.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF;
 
+	vt8500_port->uart.membase = devm_request_and_ioremap(&pdev->dev, mmres);
+	if (!vt8500_port->uart.membase)
+		return -EBUSY;
+
 	vt8500_port->clk = of_clk_get(pdev->dev.of_node, 0);
 	if (IS_ERR(vt8500_port->clk)) {
 		dev_err(&pdev->dev, "failed to get clock\n");
-		ret = -EINVAL;
-		goto err;
+		return -EINVAL;
 	}
 
 	ret = clk_prepare_enable(vt8500_port->clk);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to enable clock\n");
-		goto err;
+		return ret;
 	}
 
 	snprintf(vt8500_port->name, sizeof(vt8500_port->name),
 		 "VT8500 UART%d", pdev->id);
 
-	vt8500_port->uart.membase = devm_request_and_ioremap(&pdev->dev, mmres);
-	if (!vt8500_port->uart.membase) {
-		ret = -EBUSY;
-		goto err;
-	}
-
 	vt8500_uart_ports[port] = vt8500_port;
 
 	uart_add_one_port(&vt8500_uart_driver, &vt8500_port->uart);
@@ -632,10 +630,6 @@ static int vt8500_serial_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, vt8500_port);
 
 	return 0;
-
-err:
-	kfree(vt8500_port);
-	return ret;
 }
 
 static int vt8500_serial_remove(struct platform_device *pdev)
@@ -645,7 +639,6 @@ static int vt8500_serial_remove(struct platform_device *pdev)
 	platform_set_drvdata(pdev, NULL);
 	clk_disable_unprepare(vt8500_port->clk);
 	uart_remove_one_port(&vt8500_uart_driver, &vt8500_port->uart);
-	kfree(vt8500_port);
 
 	return 0;
 }
-- 
1.7.9.5