[PATCH 2/3] ARM: hw_breakpoint: Check function for OS Save and Restore mechanism

[Will Deacon]

From: Dietmar Eggemann <dietmar.eggemann at arm.com>

v7 debug introduced OS Save and Restore mechanism. On a v7 debug SinglePower
system, i.e a system without a separate core and debug power domain, which does
not support external debug over powerdown, it is implementation defined whether
OS Save and Restore is implemented.
v7.1 debug requires OS Save and Restore mechanism. v6 debug and v6.1 debug do
not implement it.

A new global variable bool has_ossr is introduced and is determined in
arch_hw_breakpoint_init() like debug_arch or the number of BRPs/WRPs.

The logic how to check if OS Save and Restore is supported has changed with
this patch. In reset_ctrl_regs() a mask consisting of OSLM[1] (OSLSR.3) and
OSLM[0] (OSLSR.0) was used to check if the system supports OS Save and
Restore. In the new function core_has_os_save_restore() only OSLM[0] is used.
It is not necessary to check OSLM[1] too since it is v7.1 debug specific and
v7.1 debug requires OS Save and Restore and thus OS Lock.

Signed-off-by: Dietmar Eggemann <dietmar.eggemann at arm.com>
Signed-off-by: Will Deacon <will.deacon at arm.com>
---
 arch/arm/include/asm/hw_breakpoint.h |  3 +++
 arch/arm/kernel/hw_breakpoint.c      | 28 +++++++++++++++++++++++-----
 2 files changed, 26 insertions(+), 5 deletions(-)

diff --git a/arch/arm/include/asm/hw_breakpoint.h b/arch/arm/include/asm/hw_breakpoint.h
index 01169dd..eef55ea 100644
--- a/arch/arm/include/asm/hw_breakpoint.h
+++ b/arch/arm/include/asm/hw_breakpoint.h
@@ -85,6 +85,9 @@ static inline void decode_ctrl_reg(u32 reg,
 #define ARM_DSCR_HDBGEN		(1 << 14)
 #define ARM_DSCR_MDBGEN		(1 << 15)
 
+/* OSLSR os lock model bits */
+#define ARM_OSLSR_OSLM0		(1 << 0)
+
 /* opcode2 numbers for the co-processor instructions. */
 #define ARM_OP2_BVR		4
 #define ARM_OP2_BCR		5
diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c
index 34e9375..201d440 100644
--- a/arch/arm/kernel/hw_breakpoint.c
+++ b/arch/arm/kernel/hw_breakpoint.c
@@ -50,6 +50,9 @@ static int core_num_wrps;
 /* Debug architecture version. */
 static u8 debug_arch;
 
+/* Does debug architecture support OS Save and Restore? */
+static bool has_ossr;
+
 /* Maximum supported watchpoint length. */
 static u8 max_watchpoint_len;
 
@@ -904,6 +907,23 @@ static struct undef_hook debug_reg_hook = {
 	.fn		= debug_reg_trap,
 };
 
+/* Does this core support OS Save and Restore? */
+static bool core_has_os_save_restore(void)
+{
+	u32 oslsr;
+
+	switch (get_debug_arch()) {
+	case ARM_DEBUG_ARCH_V7_1:
+		return true;
+	case ARM_DEBUG_ARCH_V7_ECP14:
+		ARM_DBG_READ(c1, c1, 4, oslsr);
+		if (oslsr & ARM_OSLSR_OSLM0)
+			return true;
+	default:
+		return false;
+	}
+}
+
 static void reset_ctrl_regs(void *unused)
 {
 	int i, raw_num_brps, err = 0, cpu = smp_processor_id();
@@ -931,11 +951,7 @@ static void reset_ctrl_regs(void *unused)
 		if ((val & 0x1) == 0)
 			err = -EPERM;
 
-		/*
-		 * Check whether we implement OS save and restore.
-		 */
-		ARM_DBG_READ(c1, c1, 4, val);
-		if ((val & 0x9) == 0)
+		if (!has_ossr)
 			goto clear_vcr;
 		break;
 	case ARM_DEBUG_ARCH_V7_1:
@@ -1025,6 +1041,8 @@ static int __init arch_hw_breakpoint_init(void)
 		return 0;
 	}
 
+	has_ossr = core_has_os_save_restore();
+
 	/* Determine how many BRPs/WRPs are available. */
 	core_num_brps = get_num_brps();
 	core_num_wrps = get_num_wrps();
-- 
1.8.0