[PATCH 07/14] usb: ehci-omap: Instantiate PHY devices if required
Roger Quadros
rogerq at ti.com
Fri Jan 11 05:59:01 EST 2013
On 01/10/2013 10:48 PM, Alan Stern wrote:
> On Thu, 10 Jan 2013, Roger Quadros wrote:
>
>> If the OMAP's Host controller is in PHY mode then we instantiate
>> a platform device for the PHY (one for each port in PHY mode) and
>> hold a reference to it so that we can use the usb_phy API, e.g.
>> while suspend/resume.
>>
>> The platform data for the PHY must be supplied in the newly added
>> .phy_config parameter in struct usbhs_omap_platform_data.
>>
>> The end goal is to move the PHY's reset and power handling code
>> out of the ehci-omap driver and into the phy driver.
>
> As mentioned in another thread, I would prefer to have these changes to
> ehci-omap.c made after the driver is converted to the new "ehci-hcd is
> a library" scheme. The patch below does the conversion; it is meant to
> apply on top of the similar patch for ehci-mxc posted recently on the
> linux-usb mailing list.
>
> After this conversion, the omap_ehci_hcd private data structure doesn't
> have to be allocated specifically. It can be handled in the same way
> as the private data structure in the ehci-mxc patch.
>
> I haven't even tried to compile this. Please let me know how it works.
>
Alan,
Thanks for the patch. I've pasted the version that builds and works and
put you as the Author of the patch, hope it is fine.
I could not find the equivalent ehci-mxc implementation though. Any
pointers to that? Thanks.
cheers,
-roger
>From fafa9c787bcf2ff3f46c07c045997614d7a8a417 Mon Sep 17 00:00:00 2001
From: Alan Stern <stern at rowland.harvard.edu>
Date: Fri, 11 Jan 2013 12:37:01 +0200
Subject: [PATCH] USB: ehci-omap: Convert to platform driver
Convert ehci-omap into a platform driver and use ehci-hcd
as a library.
CC: Alan Stern <stern at rowland.harvard.edu>
Signed-off-by: Roger Quadros <rogerq at ti.com>
---
drivers/usb/host/Kconfig | 2 +-
drivers/usb/host/Makefile | 1 +
drivers/usb/host/ehci-hcd.c | 6 +---
drivers/usb/host/ehci-omap.c | 76
+++++++++++++++++++-----------------------
4 files changed, 37 insertions(+), 48 deletions(-)
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index d6bb128..432a463 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -155,7 +155,7 @@ config USB_EHCI_MXC
Variation of ARC USB block used in some Freescale chips.
config USB_EHCI_HCD_OMAP
- bool "EHCI support for OMAP3 and later chips"
+ tristate "EHCI support for OMAP3 and later chips"
depends on USB_EHCI_HCD && ARCH_OMAP
default y
---help---
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index 1eb4c30..8a8d079 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -26,6 +26,7 @@ obj-$(CONFIG_PCI) += pci-quirks.o
obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o
obj-$(CONFIG_USB_EHCI_PCI) += ehci-pci.o
obj-$(CONFIG_USB_EHCI_HCD_PLATFORM) += ehci-platform.o
+obj-$(CONFIG_USB_EHCI_HCD_OMAP) += ehci-omap.o
obj-$(CONFIG_USB_OXU210HP_HCD) += oxu210hp-hcd.o
obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index c97503b..c44ef1d 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1260,11 +1260,6 @@ MODULE_LICENSE ("GPL");
#define PLATFORM_DRIVER ehci_hcd_sh_driver
#endif
-#ifdef CONFIG_USB_EHCI_HCD_OMAP
-#include "ehci-omap.c"
-#define PLATFORM_DRIVER ehci_hcd_omap_driver
-#endif
-
#ifdef CONFIG_PPC_PS3
#include "ehci-ps3.c"
#define PS3_SYSTEM_BUS_DRIVER ps3_ehci_driver
@@ -1352,6 +1347,7 @@ MODULE_LICENSE ("GPL");
#if !IS_ENABLED(CONFIG_USB_EHCI_PCI) && \
!IS_ENABLED(CONFIG_USB_EHCI_HCD_PLATFORM) && \
+ !IS_ENABLED(CONFIG_USB_EHCI_HCD_OMAP) && \
!defined(CONFIG_USB_CHIPIDEA_HOST) && \
!defined(PLATFORM_DRIVER) && \
!defined(PS3_SYSTEM_BUS_DRIVER) && \
diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
index b96a4bf..6388aa6 100644
--- a/drivers/usb/host/ehci-omap.c
+++ b/drivers/usb/host/ehci-omap.c
@@ -36,6 +36,9 @@
* - convert to use hwmod and runtime PM
*/
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/io.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/usb/ulpi.h>
@@ -43,6 +46,10 @@
#include <linux/pm_runtime.h>
#include <linux/gpio.h>
#include <linux/clk.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+
+#include "ehci.h"
#include <linux/platform_data/usb-omap.h>
@@ -57,9 +64,11 @@
#define EHCI_INSNREG05_ULPI_EXTREGADD_SHIFT 8
#define EHCI_INSNREG05_ULPI_WRDATA_SHIFT 0
-/*-------------------------------------------------------------------------*/
+#define DRIVER_DESC "OMAP-EHCI Host Controller driver"
-static const struct hc_driver ehci_omap_hc_driver;
+static const char hcd_name[] = "ehci-omap";
+
+/*-------------------------------------------------------------------------*/
static inline void ehci_write(void __iomem *base, u32 reg, u32 val)
@@ -166,6 +175,12 @@ static void disable_put_regulator(
/* configure so an HC device and id are always provided */
/* always called with process context; sleeping is OK */
+static struct hc_driver __read_mostly ehci_omap_hc_driver;
+
+static const struct ehci_driver_overrides ehci_omap_overrides
__initdata = {
+ .reset = omap_ehci_init,
+};
+
/**
* ehci_hcd_omap_probe - initialize TI-based HCDs
*
@@ -315,56 +330,33 @@ static struct platform_driver ehci_hcd_omap_driver = {
/*.suspend = ehci_hcd_omap_suspend, */
/*.resume = ehci_hcd_omap_resume, */
.driver = {
- .name = "ehci-omap",
+ .name = hcd_name,
}
};
/*-------------------------------------------------------------------------*/
-static const struct hc_driver ehci_omap_hc_driver = {
- .description = hcd_name,
- .product_desc = "OMAP-EHCI Host Controller",
- .hcd_priv_size = sizeof(struct ehci_hcd),
-
- /*
- * generic hardware linkage
- */
- .irq = ehci_irq,
- .flags = HCD_MEMORY | HCD_USB2,
-
- /*
- * basic lifecycle operations
- */
- .reset = omap_ehci_init,
- .start = ehci_run,
- .stop = ehci_stop,
- .shutdown = ehci_shutdown,
-
- /*
- * managing i/o requests and associated device resources
- */
- .urb_enqueue = ehci_urb_enqueue,
- .urb_dequeue = ehci_urb_dequeue,
- .endpoint_disable = ehci_endpoint_disable,
- .endpoint_reset = ehci_endpoint_reset,
+static int __init ehci_omap_init(void)
+{
+ if (usb_disabled())
+ return -ENODEV;
- /*
- * scheduling support
- */
- .get_frame_number = ehci_get_frame,
+ pr_info("%s: " DRIVER_DESC "\n", hcd_name);
- /*
- * root hub support
- */
- .hub_status_data = ehci_hub_status_data,
- .hub_control = ehci_hub_control,
- .bus_suspend = ehci_bus_suspend,
- .bus_resume = ehci_bus_resume,
+ ehci_init_driver(&ehci_omap_hc_driver, &ehci_omap_overrides);
+ return platform_driver_register(&ehci_hcd_omap_driver);
+}
+module_init(ehci_omap_init);
- .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
-};
+static void __exit ehci_omap_cleanup(void)
+{
+ platform_driver_unregister(&ehci_hcd_omap_driver);
+}
+module_exit(ehci_omap_cleanup);
MODULE_ALIAS("platform:omap-ehci");
MODULE_AUTHOR("Texas Instruments, Inc.");
MODULE_AUTHOR("Felipe Balbi <felipe.balbi at nokia.com>");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
--
1.7.4.1
More information about the linux-arm-kernel
mailing list