[PATCH v4 05/14] dmaengine: edma: Add TI EDMA device tree binding

Hebbar, Gururaja gururaja.hebbar at ti.com
Fri Jan 11 02:54:05 EST 2013


On Fri, Jan 11, 2013 at 11:18:41, Porter, Matt wrote:
> The binding definition is based on the generic DMA controller
> binding.
> 
> Signed-off-by: Matt Porter <mporter at ti.com>
> ---
>  Documentation/devicetree/bindings/dma/ti-edma.txt |   51 +++++++++++++++++++++
>  1 file changed, 51 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/dma/ti-edma.txt
> 
> diff --git a/Documentation/devicetree/bindings/dma/ti-edma.txt b/Documentation/devicetree/bindings/dma/ti-edma.txt
> new file mode 100644
> index 0000000..3344345
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/dma/ti-edma.txt
> @@ -0,0 +1,51 @@
> +TI EDMA
> +
> +Required properties:
> +- compatible : "ti,edma3"
> +- ti,hwmods: Name of the hwmods associated to the EDMA
> +- ti,edma-regions: Number of regions
> +- ti,edma-slots: Number of slots
> +- ti,edma-queue-tc-map: List of transfer control to queue mappings
> +- ti,edma-queue-priority-map: List of queue priority mappings
> +- ti,edma-default-queue: Default queue value
> +
> +Optional properties:
> +- ti,edma-reserved-channels: List of reserved channel regions
> +- ti,edma-reserved-slots: List of reserved slot regions
> +- ti,edma-xbar-event-map: Crossbar event to channel map
> +
> +Example:
> +
> +edma: edma at 49000000 {
> +	#address-cells = <1>;
> +	#size-cells = <0>;

address-cells & size-cells are only required when current node is a parent 
node & it has sibling/child nodes (that too if the child node uses "reg" 
property).

> +	reg = <0x49000000 0x10000>;
> +	interrupt-parent = <&intc>;
> +	interrupts = <12 13 14>;
> +	compatible = "ti,edma3";
> +	ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";
> +	#dma-cells = <1>;
> +	dma-channels = <64>;
> +	ti,edma-regions = <4>;
> +	ti,edma-slots = <256>;
> +	ti,edma-reserved-channels = <0  2
> +				     14 2
> +				     26 6
> +				     48 4
> +				     56 8>;
> +	ti,edma-reserved-slots = <0  2
> +				  14 2
> +				  26 6
> +				  48 4
> +				  56 8
> +				  64 127>;
> +	ti,edma-queue-tc-map = <0 0
> +				1 1
> +				2 2>;
> +	ti,edma-queue-priority-map = <0 0
> +				      1 1
> +				      2 2>;
> +	ti,edma-default-queue = <0>;
> +	ti,edma-xbar-event-map = <1 12
> +				  2 13>;
> +};
> -- 
> 1.7.9.5
> 
> _______________________________________________
> Davinci-linux-open-source mailing list
> Davinci-linux-open-source at linux.davincidsp.com
> http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
> 


Regards, 
Gururaja



More information about the linux-arm-kernel mailing list