[PATCH 14/14] ARM: tegra: trimslice: Initialize PCIe from DT

Stephen Warren swarren at wwwdotorg.org
Thu Jan 10 18:56:39 EST 2013


On 01/09/2013 01:43 PM, Thierry Reding wrote:
> With the device tree support in place, probe the PCIe controller from
> the device tree and remove the corresponding workaround in the board
> file.

Thierry, there are a couple things missing from this patch; I include a
fixup for you to squash in, but also see beyond that for a problem.

>  arch/arm/boot/dts/tegra20-trimslice.dts |   26 +++++++++++++++++++++-----
>  1 file changed, 21 insertions(+), 5 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/tegra20-trimslice.dts b/arch/arm/boot/dts/tegra20-trimslice.dts
> index ebb4c17..41fc45b 100644
> --- a/arch/arm/boot/dts/tegra20-trimslice.dts
> +++ b/arch/arm/boot/dts/tegra20-trimslice.dts
> @@ -303,12 +303,10 @@
>  
>  	pcie-controller {
>  		status = "okay";
> +		pex-clk-supply = <&pci_clk_reg>;
> +		vdd-supply = <&pci_vdd_reg>;
>  
> -		pci at 0 {
> -			status = "okay";
> -		};
> -
> -		pci at 1 {
> +		pci at 1,0 {
>  			status = "okay";
>  		};
>  	};
> @@ -366,6 +364,24 @@
>  			regulator-max-microvolt = <1800000>;
>  			regulator-always-on;
>  		};
> +
> +		pci_clk_reg: regulator at 2 {
> +			compatible = "regulator-fixed";
> +			reg = <2>;
> +			regulator-name = "pci_clk";
> +			regulator-min-microvolt = <3300000>;
> +			regulator-max-microvolt = <3300000>;
> +			regulator-always-on;
> +		};
> +
> +		pci_vdd_reg: regulator at 3 {
> +			compatible = "regulator-fixed";
> +			reg = <3>;
> +			regulator-name = "pci_vdd";
> +			regulator-min-microvolt = <1050000>;
> +			regulator-max-microvolt = <1050000>;
> +			regulator-always-on;
> +		};
>  	};
>  
>  	sound {
> -- 
> 1.7.10.4

However, PCIe still doesn't work on TrimSlice; the device enumeration
fails. The log is below:

> [    0.790425] tegra-pcie 80003000.pcie-controller: link 0 down, retrying
> [    0.801351] tegra-pcie 80003000.pcie-controller: PCI host bridge to bus 0000:00
> [    0.808945] pci_bus 0000:00: root bus resource [io  0x82000000-0x8200ffff]
> [    0.816109] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xafffffff]
> [    0.823303] pci_bus 0000:00: root bus resource [mem 0xb0000000-0xbfffffff pref]
> [    0.830893] pci_bus 0000:00: root bus resource [bus 00-ff]
> [    0.836728] pci 0000:00:01.0: [10de:0bf0] type 01 class 0x060000
> [    0.843097] pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold
> [    0.850047] PCI: bus0: Fast back to back transfers disabled
> [    0.855853] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
> [    0.864308] tegra-pcie 80003000.pcie-controller: AXI response decoding error, signature: 10010001
> [    0.873489] tegra-pcie 80003000.pcie-controller:   FPCI address: fe10010000

^^^ For some reason, the config register access fails.

> [    0.880760] PCI: bus1: Fast back to back transfers enabled
> [    0.886482] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
> [    0.893381] pci 0000:00:01.0: PCI bridge to [bus 01]
> [    0.898577] PCI: enabling device 0000:00:01.0 (0140 -> 0143)
> [    0.904535] pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge

With plain next-20130109, the device enumeration succeeds.



More information about the linux-arm-kernel mailing list