[PATCH 1/5] ARM: mach-shmobile: mackerel: update defconfig
Olof Johansson
olof at lixom.net
Thu Jan 10 18:11:11 EST 2013
Hi,
On Thu, Jan 10, 2013 at 10:23:55AM +0900, Simon Horman wrote:
> * Enable ARM_APPENDED_DTB
>
> Typically the bootloader of a mackerel board does not support DT
> so this option is useful
>
> * Add "rw" to command line
>
> This appears to be necessary for a successful NFS-root boot
>
> Signed-off-by: Simon Horman <horms+renesas at verge.net.au>
> ---
> arch/arm/configs/mackerel_defconfig | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/configs/mackerel_defconfig b/arch/arm/configs/mackerel_defconfig
> index 2098ce1..8519721 100644
> --- a/arch/arm/configs/mackerel_defconfig
> +++ b/arch/arm/configs/mackerel_defconfig
> @@ -23,7 +23,8 @@ CONFIG_AEABI=y
> CONFIG_FORCE_MAX_ZONEORDER=15
> CONFIG_ZBOOT_ROM_TEXT=0x0
> CONFIG_ZBOOT_ROM_BSS=0x0
> -CONFIG_CMDLINE="console=tty0, console=ttySC0,115200 earlyprintk=sh-sci.0,115200 root=/dev/nfs nfsroot=,tcp,v3 ip=dhcp memchunk.vpu=64m memchunk.veu0=8m memchunk.spu0=2m mem=240m"
> +CONFIG_ARM_APPENDED_DTB=y
> +CONFIG_CMDLINE="console=tty0, console=ttySC0,115200 earlyprintk=sh-sci.0,115200 root=/dev/nfs nfsroot=,tcp,v3 ip=dhcp memchunk.vpu=64m memchunk.veu0=8m memchunk.spu0=2m mem=240m rw"
I don't think memchunk is used outside of arch/sh, so it can be dropped from
this default cmdline?
Also, with DTB, there's little use for an in-kernel default command line since
you can give one with the dtb instead. Perhaps just drop it alltogether and
move it there?
-Olof
More information about the linux-arm-kernel
mailing list