[PATCH 10/14] usb: ehci-omap: Remove PHY regulator handling code
Roger Quadros
rogerq at ti.com
Thu Jan 10 11:51:30 EST 2013
PHY regulator handling must be done in the PHY driver
Signed-off-by: Roger Quadros <rogerq at ti.com>
---
drivers/usb/host/ehci-omap.c | 31 +------------------------------
1 files changed, 1 insertions(+), 30 deletions(-)
diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
index 46b28d6..02475c7 100644
--- a/drivers/usb/host/ehci-omap.c
+++ b/drivers/usb/host/ehci-omap.c
@@ -39,7 +39,6 @@
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/usb/ulpi.h>
-#include <linux/regulator/consumer.h>
#include <linux/pm_runtime.h>
#include <linux/gpio.h>
#include <linux/clk.h>
@@ -105,19 +104,6 @@ static int omap_ehci_init(struct usb_hcd *hcd)
return rc;
}
-static void disable_put_regulator(
- struct usbhs_omap_platform_data *pdata)
-{
- int i;
-
- for (i = 0 ; i < OMAP3_HS_USB_PORTS ; i++) {
- if (pdata->regulator[i]) {
- regulator_disable(pdata->regulator[i]);
- regulator_put(pdata->regulator[i]);
- }
- }
-}
-
/* configure so an HC device and id are always provided */
/* always called with process context; sleeping is OK */
@@ -140,7 +126,6 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
int ret = -ENODEV;
int irq;
int i;
- char supply[7];
if (usb_disabled())
return -ENODEV;
@@ -203,24 +188,12 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, omap_hcd);
- /* get ehci regulator and enable */
for (i = 0 ; i < omap_hcd->nports ; i++) {
struct platform_device *phy_pdev;
struct usbhs_phy_config *phy_config;
- if (pdata->port_mode[i] != OMAP_EHCI_PORT_MODE_PHY) {
- pdata->regulator[i] = NULL;
+ if (pdata->port_mode[i] != OMAP_EHCI_PORT_MODE_PHY)
continue;
- }
- snprintf(supply, sizeof(supply), "hsusb%d", i);
- pdata->regulator[i] = regulator_get(dev, supply);
- if (IS_ERR(pdata->regulator[i])) {
- pdata->regulator[i] = NULL;
- dev_dbg(dev,
- "failed to get ehci port%d regulator\n", i);
- } else {
- regulator_enable(pdata->regulator[i]);
- }
/* instantiate PHY */
if (!pdata->phy_config[i]) {
@@ -275,7 +248,6 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
return 0;
err_pm_runtime:
- disable_put_regulator(pdata);
pm_runtime_put_sync(dev);
usb_put_hcd(hcd);
for (i = 0 ; i < omap_hcd->nports ; i++) {
@@ -307,7 +279,6 @@ static int ehci_hcd_omap_remove(struct platform_device *pdev)
int i;
usb_remove_hcd(hcd);
- disable_put_regulator(dev->platform_data);
iounmap(hcd->regs);
usb_put_hcd(hcd);
--
1.7.4.1
More information about the linux-arm-kernel
mailing list