[PATCH 1/3] ARM: dts: exynos5: Add power domain clocks to pd node of Gscaler and MFC

[Thomas Abraham]

On 9 January 2013 04:54, Prasanna Kumar <prasanna.ps at samsung.com> wrote:
> Power domain clks are added to Gscaler and MFC pd nodes.
> These clocks are saved during power off.
>
> Signed-off-by: Prasanna Kumar <prasanna.ps at samsung.com>
> ---
>  arch/arm/boot/dts/exynos5250.dtsi |    2 ++
>  1 files changed, 2 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
> index 6d0e87c..8043be3 100644
> --- a/arch/arm/boot/dts/exynos5250.dtsi
> +++ b/arch/arm/boot/dts/exynos5250.dtsi
> @@ -558,11 +558,13 @@
>         pd_gsc: gsc-power-domain at 0x10044000 {
>                 compatible = "samsung,exynos4210-pd";
>                 reg = <0x10044000 0x20>;
> +               samsung,exynos-pd-clks ="aclk_266_gscl","aclk_300_gscl";

Passing clock names from dts is generally discouraged. These clock
names are linux specific. dts/dtsi files should only describe the
hardware and not have any linux specific entries in them. Common clock
framework can be used here to specify the clock.

>         };
>
>         pd_mfc: mfc-power-domain at 0x10044040 {
>                 compatible = "samsung,exynos4210-pd";
>                 reg = <0x10044040 0x20>;
> +               samsung,exynos-pd-clks ="aclk_333";

same as above comment.

Thanks,
Thomas.

>         };
>
>         gsc_0:  gsc at 0x13e00000 {
> --
> 1.7.5.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html