[PATCH v2] cpuidle: kirkwood: Move out of mach directory
Andrew Lunn
andrew at lunn.ch
Wed Jan 9 07:22:15 EST 2013
Move the Kirkwood cpuidle driver out of arch/arm/mach-kirkwood and
into drivers/cpuidle. Convert the driver into a platform driver.
Signed-off-by: Andrew Lunn <andrew at lunn.ch>
---
arch/arm/configs/kirkwood_defconfig | 1 +
arch/arm/mach-kirkwood/Makefile | 1 -
arch/arm/mach-kirkwood/board-dt.c | 2 +
arch/arm/mach-kirkwood/common.c | 23 +++++
arch/arm/mach-kirkwood/common.h | 1 +
arch/arm/mach-kirkwood/cpuidle.c | 73 ----------------
arch/arm/mach-kirkwood/include/mach/kirkwood.h | 3 +-
drivers/cpuidle/Kconfig | 6 ++
drivers/cpuidle/Makefile | 1 +
drivers/cpuidle/cpuidle-kirkwood.c | 106 ++++++++++++++++++++++++
10 files changed, 142 insertions(+), 75 deletions(-)
delete mode 100644 arch/arm/mach-kirkwood/cpuidle.c
create mode 100644 drivers/cpuidle/cpuidle-kirkwood.c
diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig
index 93f3794..13482ea 100644
--- a/arch/arm/configs/kirkwood_defconfig
+++ b/arch/arm/configs/kirkwood_defconfig
@@ -56,6 +56,7 @@ CONFIG_AEABI=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_KIRKWOOD=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
index 8d2e5a9..d665309 100644
--- a/arch/arm/mach-kirkwood/Makefile
+++ b/arch/arm/mach-kirkwood/Makefile
@@ -19,7 +19,6 @@ obj-$(CONFIG_MACH_NET2BIG_V2) += netxbig_v2-setup.o lacie_v2-common.o
obj-$(CONFIG_MACH_NET5BIG_V2) += netxbig_v2-setup.o lacie_v2-common.o
obj-$(CONFIG_MACH_T5325) += t5325-setup.o
-obj-$(CONFIG_CPU_IDLE) += cpuidle.o
obj-$(CONFIG_ARCH_KIRKWOOD_DT) += board-dt.o
obj-$(CONFIG_MACH_DREAMPLUG_DT) += board-dreamplug.o
obj-$(CONFIG_MACH_ICONNECT_DT) += board-iconnect.o
diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c
index ff4150a..f9a323d 100644
--- a/arch/arm/mach-kirkwood/board-dt.c
+++ b/arch/arm/mach-kirkwood/board-dt.c
@@ -94,6 +94,8 @@ static void __init kirkwood_dt_init(void)
/* Setup root of clk tree */
kirkwood_of_clk_init();
+ kirkwood_cpuidle_init();
+
#ifdef CONFIG_KEXEC
kexec_reinit = kirkwood_enable_pcie;
#endif
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index bac21a5..5ed1f2e 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -499,6 +499,28 @@ void __init kirkwood_wdt_init(void)
orion_wdt_init();
}
+/*****************************************************************************
+ * CPU idle
+ ****************************************************************************/
+static struct resource kirkwood_cpuidle_resource[] = {
+ {
+ .flags = IORESOURCE_MEM,
+ .start = DDR_OPERATION_BASE,
+ .end = DDR_OPERATION_BASE + 3,
+ },
+};
+
+static struct platform_device kirkwood_cpuidle = {
+ .name = "kirkwood_cpuidle",
+ .id = -1,
+ .resource = kirkwood_cpuidle_resource,
+ .num_resources = 1,
+};
+
+void __init kirkwood_cpuidle_init(void)
+{
+ platform_device_register(&kirkwood_cpuidle);
+}
/*****************************************************************************
* Time handling
@@ -671,6 +693,7 @@ void __init kirkwood_init(void)
kirkwood_xor1_init();
kirkwood_crypto_init();
+ kirkwood_cpuidle_init();
#ifdef CONFIG_KEXEC
kexec_reinit = kirkwood_enable_pcie;
#endif
diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h
index 5ffa57f..320aa61 100644
--- a/arch/arm/mach-kirkwood/common.h
+++ b/arch/arm/mach-kirkwood/common.h
@@ -50,6 +50,7 @@ void kirkwood_nand_init(struct mtd_partition *parts, int nr_parts, int delay);
void kirkwood_nand_init_rnb(struct mtd_partition *parts, int nr_parts,
int (*dev_ready)(struct mtd_info *));
void kirkwood_audio_init(void);
+void kirkwood_cpuidle_init(void);
void kirkwood_restart(char, const char *);
void kirkwood_clk_init(void);
diff --git a/arch/arm/mach-kirkwood/cpuidle.c b/arch/arm/mach-kirkwood/cpuidle.c
deleted file mode 100644
index f730467..0000000
--- a/arch/arm/mach-kirkwood/cpuidle.c
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/cpuidle.c
- *
- * CPU idle Marvell Kirkwood SoCs
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
- * The cpu idle uses wait-for-interrupt and DDR self refresh in order
- * to implement two idle states -
- * #1 wait-for-interrupt
- * #2 wait-for-interrupt and DDR self refresh
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/cpuidle.h>
-#include <linux/io.h>
-#include <linux/export.h>
-#include <asm/proc-fns.h>
-#include <asm/cpuidle.h>
-#include <mach/kirkwood.h>
-
-#define KIRKWOOD_MAX_STATES 2
-
-/* Actual code that puts the SoC in different idle states */
-static int kirkwood_enter_idle(struct cpuidle_device *dev,
- struct cpuidle_driver *drv,
- int index)
-{
- writel(0x7, DDR_OPERATION_BASE);
- cpu_do_idle();
-
- return index;
-}
-
-static struct cpuidle_driver kirkwood_idle_driver = {
- .name = "kirkwood_idle",
- .owner = THIS_MODULE,
- .en_core_tk_irqen = 1,
- .states[0] = ARM_CPUIDLE_WFI_STATE,
- .states[1] = {
- .enter = kirkwood_enter_idle,
- .exit_latency = 10,
- .target_residency = 100000,
- .flags = CPUIDLE_FLAG_TIME_VALID,
- .name = "DDR SR",
- .desc = "WFI and DDR Self Refresh",
- },
- .state_count = KIRKWOOD_MAX_STATES,
-};
-
-static DEFINE_PER_CPU(struct cpuidle_device, kirkwood_cpuidle_device);
-
-/* Initialize CPU idle by registering the idle states */
-static int kirkwood_init_cpuidle(void)
-{
- struct cpuidle_device *device;
-
- device = &per_cpu(kirkwood_cpuidle_device, smp_processor_id());
- device->state_count = KIRKWOOD_MAX_STATES;
-
- cpuidle_register_driver(&kirkwood_idle_driver);
- if (cpuidle_register_device(device)) {
- pr_err("kirkwood_init_cpuidle: Failed registering\n");
- return -EIO;
- }
- return 0;
-}
-
-device_initcall(kirkwood_init_cpuidle);
diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
index 041653a..a05563a 100644
--- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h
+++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
@@ -60,8 +60,9 @@
* Register Map
*/
#define DDR_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x00000)
+#define DDR_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x00000)
#define DDR_WINDOW_CPU_BASE (DDR_VIRT_BASE + 0x1500)
-#define DDR_OPERATION_BASE (DDR_VIRT_BASE + 0x1418)
+#define DDR_OPERATION_BASE (DDR_PHYS_BASE + 0x1418)
#define DEV_BUS_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x10000)
#define DEV_BUS_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x10000)
diff --git a/drivers/cpuidle/Kconfig b/drivers/cpuidle/Kconfig
index c4cc27e..071e2c3 100644
--- a/drivers/cpuidle/Kconfig
+++ b/drivers/cpuidle/Kconfig
@@ -39,4 +39,10 @@ config CPU_IDLE_CALXEDA
help
Select this to enable cpuidle on Calxeda processors.
+config CPU_IDLE_KIRKWOOD
+ bool "CPU Idle Driver for Kirkwood processors"
+ depends on ARCH_KIRKWOOD
+ help
+ Select this to enable cpuidle on Kirkwood processors.
+
endif
diff --git a/drivers/cpuidle/Makefile b/drivers/cpuidle/Makefile
index 03ee874..24c6e7d 100644
--- a/drivers/cpuidle/Makefile
+++ b/drivers/cpuidle/Makefile
@@ -6,3 +6,4 @@ obj-y += cpuidle.o driver.o governor.o sysfs.o governors/
obj-$(CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED) += coupled.o
obj-$(CONFIG_CPU_IDLE_CALXEDA) += cpuidle-calxeda.o
+obj-$(CONFIG_CPU_IDLE_KIRKWOOD) += cpuidle-kirkwood.o
diff --git a/drivers/cpuidle/cpuidle-kirkwood.c b/drivers/cpuidle/cpuidle-kirkwood.c
new file mode 100644
index 0000000..fc90445
--- /dev/null
+++ b/drivers/cpuidle/cpuidle-kirkwood.c
@@ -0,0 +1,106 @@
+/*
+ * arch/arm/mach-kirkwood/cpuidle.c
+ *
+ * CPU idle Marvell Kirkwood SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * The cpu idle uses wait-for-interrupt and DDR self refresh in order
+ * to implement two idle states -
+ * #1 wait-for-interrupt
+ * #2 wait-for-interrupt and DDR self refresh
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/cpuidle.h>
+#include <linux/io.h>
+#include <linux/export.h>
+#include <asm/proc-fns.h>
+#include <asm/cpuidle.h>
+
+#define KIRKWOOD_MAX_STATES 2
+
+static void __iomem *ddr_operation_base;
+
+/* Actual code that puts the SoC in different idle states */
+static int kirkwood_enter_idle(struct cpuidle_device *dev,
+ struct cpuidle_driver *drv,
+ int index)
+{
+ writel(0x7, ddr_operation_base);
+ cpu_do_idle();
+
+ return index;
+}
+
+static struct cpuidle_driver kirkwood_idle_driver = {
+ .name = "kirkwood_idle",
+ .owner = THIS_MODULE,
+ .en_core_tk_irqen = 1,
+ .states[0] = ARM_CPUIDLE_WFI_STATE,
+ .states[1] = {
+ .enter = kirkwood_enter_idle,
+ .exit_latency = 10,
+ .target_residency = 100000,
+ .flags = CPUIDLE_FLAG_TIME_VALID,
+ .name = "DDR SR",
+ .desc = "WFI and DDR Self Refresh",
+ },
+ .state_count = KIRKWOOD_MAX_STATES,
+};
+static struct cpuidle_device *device;
+
+static DEFINE_PER_CPU(struct cpuidle_device, kirkwood_cpuidle_device);
+
+/* Initialize CPU idle by registering the idle states */
+static int kirkwood_cpuidle_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (res == NULL)
+ return -EINVAL;
+
+ ddr_operation_base = devm_request_and_ioremap(&pdev->dev, res);
+ if (!ddr_operation_base)
+ return -EADDRNOTAVAIL;
+
+ device = &per_cpu(kirkwood_cpuidle_device, smp_processor_id());
+ device->state_count = KIRKWOOD_MAX_STATES;
+
+ cpuidle_register_driver(&kirkwood_idle_driver);
+ if (cpuidle_register_device(device)) {
+ pr_err("kirkwood_init_cpuidle: Failed registering\n");
+ return -EIO;
+ }
+ return 0;
+}
+
+int kirkwood_cpuidle_remove(struct platform_device *pdev)
+{
+ cpuidle_unregister_device(device);
+ cpuidle_unregister_driver(&kirkwood_idle_driver);
+
+ return 0;
+}
+
+static struct platform_driver kirkwood_cpuidle_driver = {
+ .probe = kirkwood_cpuidle_probe,
+ .remove = __devexit_p(kirkwood_cpuidle_remove),
+ .driver = {
+ .name = "kirkwood_cpuidle",
+ .owner = THIS_MODULE,
+ },
+};
+
+module_platform_driver(kirkwood_cpuidle_driver);
+
+MODULE_AUTHOR("Andrew Lunn <andrew at lunn.ch>");
+MODULE_DESCRIPTION("Kirkwood cpu idle driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:kirkwood-cpuidle");
--
1.7.10.4
More information about the linux-arm-kernel
mailing list