[PATCH v3 0/9] Migrate Tegra to common clock framework

[Prashant Gaikwad]

On Wednesday 09 January 2013 02:31 AM, Stephen Warren wrote:
> On 01/08/2013 11:49 AM, Stephen Warren wrote:
>> On 01/08/2013 06:19 AM, Prashant Gaikwad wrote:
>>> On Tuesday 08 January 2013 05:40 AM, Stephen Warren wrote:
>>>> On 01/04/2013 10:22 AM, Stephen Warren wrote:
>>>>> On 01/04/2013 02:40 AM, Prashant Gaikwad wrote:
>>>>>> This patchset does following:
>>>>>> 1. Decompose single tegra clock structure into multiple clocks.
>>>>>> 2. Try to use standard clock types supported by common clock framework.
>>>>>> 3. Use dynamic initialization.
>>>>>> 4. Move all clock code to drivers/clk/tegra from mach-tegra.
>>>>>> 5. Add device tree support for Tegra20 and Tegra30 clocks.
>>>>>> 6. Remove all legacy clock code from mach-tegra.
>>>>> I think there are bugs here. I applied all your clock patches on top of
>>>>> Tegra's for-next (see list below), and found that the following don't
>>>>> work on Springbank:
>>>>>
>>>>> * HDMI display
>>>>> * Audio playback
>>>>> * WiFi
>>>> (BTW, I stopped Cc'ing linux-kernel@, but added linux-tegra@ instead...)
>>>>
>>>> Prashant, some updated testing results based off the "dev/ccf" branch
>>>> you sent me on our internal git server:
>> ...
>>> I have updated the internal branch with all the above mentioned fixes.
> ...
>> The remaining item is the display issue on Tegra30, which I'll go look
>> at now.
> The USB3 clock, which isn't used by any drivers on Tegra30, and hence
> was disabled at boot, was set up incorrectly and ended up mapping to the
> disp1 clock, and hence turned off the display. The following fixes it:

Stephen, thanks for the fix!! I have included this and PLLE fix; updated 
internal branch.

Please let me know if it is good to merge now, I will send the patches.

>> diff --git a/drivers/clk/tegra/clk-tegra30.c b/drivers/clk/tegra/clk-tegra30.c
>> index f2f526e..0bac07c 100644
>> --- a/drivers/clk/tegra/clk-tegra30.c
>> +++ b/drivers/clk/tegra/clk-tegra30.c
>> @@ -1541,7 +1541,7 @@ static void __init tegra30_periph_clk_init(void)
>>   
>>   	/* usb3 */
>>   	clk = tegra_clk_periph_gate("usb3", "clk_m", 0, clk_base, 0, 59,
>> -				    &periph_l_regs, periph_clk_enb_refcnt);
>> +				    &periph_h_regs, periph_clk_enb_refcnt);
>>   	clk_register_clkdev(clk, NULL, "tegra-ehci.2");
>>   	clks[usb3] = clk;
> I wonder if there are any other similar issues?

Reviewed, there were none.