[PATCH v9 1/2] usb: phy: samsung: Introducing usb phy driver for hsotg
Praveen Paneri
p.paneri at samsung.com
Wed Jan 9 01:30:29 EST 2013
Hi Kukjin,
It has been a long time since I posted these patches. It will be very
kind of you to express your views about this series.
If this looks fine to you, please ack.
Thanks,
Praveen
On Fri, Nov 23, 2012 at 4:03 PM, Praveen Paneri <p.paneri at samsung.com> wrote:
> This driver uses usb_phy interface to interact with s3c-hsotg. Supports
> phy_init and phy_shutdown functions to enable/disable usb phy. Support
> will be extended to host controllers and more Samsung SoCs.
>
> Signed-off-by: Praveen Paneri <p.paneri at samsung.com>
> Acked-by: Heiko Stuebner <heiko at sntech.de>
> Acked-by: Kyungmin Park <kyungmin.park at samsung.com>
> ---
> .../devicetree/bindings/usb/samsung-usbphy.txt | 11 +
> drivers/usb/phy/Kconfig | 8 +
> drivers/usb/phy/Makefile | 1 +
> drivers/usb/phy/samsung-usbphy.c | 354 ++++++++++++++++++++
> include/linux/platform_data/samsung-usbphy.h | 27 ++
> 5 files changed, 401 insertions(+), 0 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/usb/samsung-usbphy.txt
> create mode 100644 drivers/usb/phy/samsung-usbphy.c
> create mode 100644 include/linux/platform_data/samsung-usbphy.h
>
> diff --git a/Documentation/devicetree/bindings/usb/samsung-usbphy.txt b/Documentation/devicetree/bindings/usb/samsung-usbphy.txt
> new file mode 100644
> index 0000000..7b26e2d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/samsung-usbphy.txt
> @@ -0,0 +1,11 @@
> +* Samsung's usb phy transceiver
> +
> +The Samsung's phy transceiver is used for controlling usb otg phy for
> +s3c-hsotg usb device controller.
> +TODO: Adding the PHY binding with controller(s) according to the under
> +developement generic PHY driver.
> +
> +Required properties:
> +- compatible : should be "samsung,exynos4210-usbphy"
> +- reg : base physical address of the phy registers and length of memory mapped
> + region.
> diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
> index 7eb73c5..17ad743 100644
> --- a/drivers/usb/phy/Kconfig
> +++ b/drivers/usb/phy/Kconfig
> @@ -44,3 +44,11 @@ config USB_RCAR_PHY
>
> To compile this driver as a module, choose M here: the
> module will be called rcar-phy.
> +
> +config SAMSUNG_USBPHY
> + bool "Samsung USB PHY controller Driver"
> + depends on USB_S3C_HSOTG
> + select USB_OTG_UTILS
> + help
> + Enable this to support Samsung USB phy controller for samsung
> + SoCs.
> diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
> index 1a579a8..ec304f6 100644
> --- a/drivers/usb/phy/Makefile
> +++ b/drivers/usb/phy/Makefile
> @@ -9,3 +9,4 @@ obj-$(CONFIG_USB_ISP1301) += isp1301.o
> obj-$(CONFIG_MV_U3D_PHY) += mv_u3d_phy.o
> obj-$(CONFIG_USB_EHCI_TEGRA) += tegra_usb_phy.o
> obj-$(CONFIG_USB_RCAR_PHY) += rcar-phy.o
> +obj-$(CONFIG_SAMSUNG_USBPHY) += samsung-usbphy.o
> diff --git a/drivers/usb/phy/samsung-usbphy.c b/drivers/usb/phy/samsung-usbphy.c
> new file mode 100644
> index 0000000..5c5e1bb
> --- /dev/null
> +++ b/drivers/usb/phy/samsung-usbphy.c
> @@ -0,0 +1,354 @@
> +/* linux/drivers/usb/phy/samsung-usbphy.c
> + *
> + * Copyright (c) 2012 Samsung Electronics Co., Ltd.
> + * http://www.samsung.com
> + *
> + * Author: Praveen Paneri <p.paneri at samsung.com>
> + *
> + * Samsung USB2.0 High-speed OTG transceiver, talks to S3C HS OTG controller
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/err.h>
> +#include <linux/io.h>
> +#include <linux/of.h>
> +#include <linux/usb/otg.h>
> +#include <linux/platform_data/samsung-usbphy.h>
> +
> +/* Register definitions */
> +
> +#define SAMSUNG_PHYPWR (0x00)
> +
> +#define PHYPWR_NORMAL_MASK (0x19 << 0)
> +#define PHYPWR_OTG_DISABLE (0x1 << 4)
> +#define PHYPWR_ANALOG_POWERDOWN (0x1 << 3)
> +#define PHYPWR_FORCE_SUSPEND (0x1 << 1)
> +/* For Exynos4 */
> +#define PHYPWR_NORMAL_MASK_PHY0 (0x39 << 0)
> +#define PHYPWR_SLEEP_PHY0 (0x1 << 5)
> +
> +#define SAMSUNG_PHYCLK (0x04)
> +
> +#define PHYCLK_MODE_USB11 (0x1 << 6)
> +#define PHYCLK_EXT_OSC (0x1 << 5)
> +#define PHYCLK_COMMON_ON_N (0x1 << 4)
> +#define PHYCLK_ID_PULL (0x1 << 2)
> +#define PHYCLK_CLKSEL_MASK (0x3 << 0)
> +#define PHYCLK_CLKSEL_48M (0x0 << 0)
> +#define PHYCLK_CLKSEL_12M (0x2 << 0)
> +#define PHYCLK_CLKSEL_24M (0x3 << 0)
> +
> +#define SAMSUNG_RSTCON (0x08)
> +
> +#define RSTCON_PHYLINK_SWRST (0x1 << 2)
> +#define RSTCON_HLINK_SWRST (0x1 << 1)
> +#define RSTCON_SWRST (0x1 << 0)
> +
> +#ifndef MHZ
> +#define MHZ (1000*1000)
> +#endif
> +
> +enum samsung_cpu_type {
> + TYPE_S3C64XX,
> + TYPE_EXYNOS4210,
> +};
> +
> +/*
> + * struct samsung_usbphy - transceiver driver state
> + * @phy: transceiver structure
> + * @plat: platform data
> + * @dev: The parent device supplied to the probe function
> + * @clk: usb phy clock
> + * @regs: usb phy register memory base
> + * @ref_clk_freq: reference clock frequency selection
> + * @cpu_type: machine identifier
> + */
> +struct samsung_usbphy {
> + struct usb_phy phy;
> + struct samsung_usbphy_data *plat;
> + struct device *dev;
> + struct clk *clk;
> + void __iomem *regs;
> + int ref_clk_freq;
> + int cpu_type;
> +};
> +
> +#define phy_to_sphy(x) container_of((x), struct samsung_usbphy, phy)
> +
> +/*
> + * Returns reference clock frequency selection value
> + */
> +static int samsung_usbphy_get_refclk_freq(struct samsung_usbphy *sphy)
> +{
> + struct clk *ref_clk;
> + int refclk_freq = 0;
> +
> + ref_clk = clk_get(sphy->dev, "xusbxti");
> + if (IS_ERR(ref_clk)) {
> + dev_err(sphy->dev, "Failed to get reference clock\n");
> + return PTR_ERR(ref_clk);
> + }
> +
> + switch (clk_get_rate(ref_clk)) {
> + case 12 * MHZ:
> + refclk_freq = PHYCLK_CLKSEL_12M;
> + break;
> + case 24 * MHZ:
> + refclk_freq = PHYCLK_CLKSEL_24M;
> + break;
> + case 48 * MHZ:
> + refclk_freq = PHYCLK_CLKSEL_48M;
> + break;
> + default:
> + if (sphy->cpu_type == TYPE_S3C64XX)
> + refclk_freq = PHYCLK_CLKSEL_48M;
> + else
> + refclk_freq = PHYCLK_CLKSEL_24M;
> + break;
> + }
> + clk_put(ref_clk);
> +
> + return refclk_freq;
> +}
> +
> +static void samsung_usbphy_enable(struct samsung_usbphy *sphy)
> +{
> + void __iomem *regs = sphy->regs;
> + u32 phypwr;
> + u32 phyclk;
> + u32 rstcon;
> +
> + /* set clock frequency for PLL */
> + phyclk = sphy->ref_clk_freq;
> + phypwr = readl(regs + SAMSUNG_PHYPWR);
> + rstcon = readl(regs + SAMSUNG_RSTCON);
> +
> + switch (sphy->cpu_type) {
> + case TYPE_S3C64XX:
> + phyclk &= ~PHYCLK_COMMON_ON_N;
> + phypwr &= ~PHYPWR_NORMAL_MASK;
> + rstcon |= RSTCON_SWRST;
> + break;
> + case TYPE_EXYNOS4210:
> + phypwr &= ~PHYPWR_NORMAL_MASK_PHY0;
> + rstcon |= RSTCON_SWRST;
> + default:
> + break;
> + }
> +
> + writel(phyclk, regs + SAMSUNG_PHYCLK);
> + /* Configure PHY0 for normal operation*/
> + writel(phypwr, regs + SAMSUNG_PHYPWR);
> + /* reset all ports of PHY and Link */
> + writel(rstcon, regs + SAMSUNG_RSTCON);
> + udelay(10);
> + rstcon &= ~RSTCON_SWRST;
> + writel(rstcon, regs + SAMSUNG_RSTCON);
> +}
> +
> +static void samsung_usbphy_disable(struct samsung_usbphy *sphy)
> +{
> + void __iomem *regs = sphy->regs;
> + u32 phypwr;
> +
> + phypwr = readl(regs + SAMSUNG_PHYPWR);
> +
> + switch (sphy->cpu_type) {
> + case TYPE_S3C64XX:
> + phypwr |= PHYPWR_NORMAL_MASK;
> + break;
> + case TYPE_EXYNOS4210:
> + phypwr |= PHYPWR_NORMAL_MASK_PHY0;
> + default:
> + break;
> + }
> +
> + /* Disable analog and otg block power */
> + writel(phypwr, regs + SAMSUNG_PHYPWR);
> +}
> +
> +/*
> + * The function passed to the usb driver for phy initialization
> + */
> +static int samsung_usbphy_init(struct usb_phy *phy)
> +{
> + struct samsung_usbphy *sphy;
> + int ret = 0;
> +
> + sphy = phy_to_sphy(phy);
> +
> + /* Enable the phy clock */
> + ret = clk_prepare_enable(sphy->clk);
> + if (ret) {
> + dev_err(sphy->dev, "%s: clk_prepare_enable failed\n", __func__);
> + return ret;
> + }
> +
> + /* Disable phy isolation */
> + if (sphy->plat && sphy->plat->pmu_isolation)
> + sphy->plat->pmu_isolation(false);
> +
> + /* Initialize usb phy registers */
> + samsung_usbphy_enable(sphy);
> +
> + /* Disable the phy clock */
> + clk_disable_unprepare(sphy->clk);
> + return ret;
> +}
> +
> +/*
> + * The function passed to the usb driver for phy shutdown
> + */
> +static void samsung_usbphy_shutdown(struct usb_phy *phy)
> +{
> + struct samsung_usbphy *sphy;
> +
> + sphy = phy_to_sphy(phy);
> +
> + if (clk_prepare_enable(sphy->clk)) {
> + dev_err(sphy->dev, "%s: clk_prepare_enable failed\n", __func__);
> + return;
> + }
> +
> + /* De-initialize usb phy registers */
> + samsung_usbphy_disable(sphy);
> +
> + /* Enable phy isolation */
> + if (sphy->plat && sphy->plat->pmu_isolation)
> + sphy->plat->pmu_isolation(true);
> +
> + clk_disable_unprepare(sphy->clk);
> +}
> +
> +static const struct of_device_id samsung_usbphy_dt_match[];
> +
> +static inline int samsung_usbphy_get_driver_data(struct platform_device *pdev)
> +{
> + if (pdev->dev.of_node) {
> + const struct of_device_id *match;
> + match = of_match_node(samsung_usbphy_dt_match,
> + pdev->dev.of_node);
> + return (int) match->data;
> + }
> +
> + return platform_get_device_id(pdev)->driver_data;
> +}
> +
> +static int __devinit samsung_usbphy_probe(struct platform_device *pdev)
> +{
> + struct samsung_usbphy *sphy;
> + struct samsung_usbphy_data *pdata;
> + struct device *dev = &pdev->dev;
> + struct resource *phy_mem;
> + void __iomem *phy_base;
> + struct clk *clk;
> +
> + pdata = pdev->dev.platform_data;
> + if (!pdata) {
> + dev_err(&pdev->dev, "%s: no platform data defined\n", __func__);
> + return -EINVAL;
> + }
> +
> + phy_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + if (!phy_mem) {
> + dev_err(dev, "%s: missing mem resource\n", __func__);
> + return -ENODEV;
> + }
> +
> + phy_base = devm_request_and_ioremap(dev, phy_mem);
> + if (!phy_base) {
> + dev_err(dev, "%s: register mapping failed\n", __func__);
> + return -ENXIO;
> + }
> +
> + sphy = devm_kzalloc(dev, sizeof(*sphy), GFP_KERNEL);
> + if (!sphy)
> + return -ENOMEM;
> +
> + clk = devm_clk_get(dev, "otg");
> + if (IS_ERR(clk)) {
> + dev_err(dev, "Failed to get otg clock\n");
> + return PTR_ERR(clk);
> + }
> +
> + sphy->dev = &pdev->dev;
> + sphy->plat = pdata;
> + sphy->regs = phy_base;
> + sphy->clk = clk;
> + sphy->phy.dev = sphy->dev;
> + sphy->phy.label = "samsung-usbphy";
> + sphy->phy.init = samsung_usbphy_init;
> + sphy->phy.shutdown = samsung_usbphy_shutdown;
> + sphy->cpu_type = samsung_usbphy_get_driver_data(pdev);
> + sphy->ref_clk_freq = samsung_usbphy_get_refclk_freq(sphy);
> +
> + platform_set_drvdata(pdev, sphy);
> +
> + return usb_add_phy(&sphy->phy, USB_PHY_TYPE_USB2);
> +}
> +
> +static int __exit samsung_usbphy_remove(struct platform_device *pdev)
> +{
> + struct samsung_usbphy *sphy = platform_get_drvdata(pdev);
> +
> + usb_remove_phy(&sphy->phy);
> +
> + return 0;
> +}
> +
> +#ifdef CONFIG_OF
> +static const struct of_device_id samsung_usbphy_dt_match[] = {
> + {
> + .compatible = "samsung,s3c64xx-usbphy",
> + .data = (void *)TYPE_S3C64XX,
> + }, {
> + .compatible = "samsung,exynos4210-usbphy",
> + .data = (void *)TYPE_EXYNOS4210,
> + },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, samsung_usbphy_dt_match);
> +#endif
> +
> +static struct platform_device_id samsung_usbphy_driver_ids[] = {
> + {
> + .name = "s3c64xx-usbphy",
> + .driver_data = TYPE_S3C64XX,
> + }, {
> + .name = "exynos4210-usbphy",
> + .driver_data = TYPE_EXYNOS4210,
> + },
> + {},
> +};
> +
> +MODULE_DEVICE_TABLE(platform, samsung_usbphy_driver_ids);
> +
> +static struct platform_driver samsung_usbphy_driver = {
> + .probe = samsung_usbphy_probe,
> + .remove = __devexit_p(samsung_usbphy_remove),
> + .id_table = samsung_usbphy_driver_ids,
> + .driver = {
> + .name = "samsung-usbphy",
> + .owner = THIS_MODULE,
> + .of_match_table = of_match_ptr(samsung_usbphy_dt_match),
> + },
> +};
> +
> +module_platform_driver(samsung_usbphy_driver);
> +
> +MODULE_DESCRIPTION("Samsung USB phy controller");
> +MODULE_AUTHOR("Praveen Paneri <p.paneri at samsung.com>");
> +MODULE_LICENSE("GPL");
> +MODULE_ALIAS("platform:samsung-usbphy");
> diff --git a/include/linux/platform_data/samsung-usbphy.h b/include/linux/platform_data/samsung-usbphy.h
> new file mode 100644
> index 0000000..1bd24cb
> --- /dev/null
> +++ b/include/linux/platform_data/samsung-usbphy.h
> @@ -0,0 +1,27 @@
> +/*
> + * Copyright (C) 2012 Samsung Electronics Co.Ltd
> + * http://www.samsung.com/
> + * Author: Praveen Paneri <p.paneri at samsung.com>
> + *
> + * Defines platform data for samsung usb phy driver.
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; either version 2 of the License, or (at your
> + * option) any later version.
> + */
> +
> +#ifndef __SAMSUNG_USBPHY_PLATFORM_H
> +#define __SAMSUNG_USBPHY_PLATFORM_H
> +
> +/**
> + * samsung_usbphy_data - Platform data for USB PHY driver.
> + * @pmu_isolation: Function to control usb phy isolation in PMU.
> + */
> +struct samsung_usbphy_data {
> + void (*pmu_isolation)(int on);
> +};
> +
> +extern void samsung_usbphy_set_pdata(struct samsung_usbphy_data *pd);
> +
> +#endif /* __SAMSUNG_USBPHY_PLATFORM_H */
> --
> 1.7.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-usb" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
More information about the linux-arm-kernel
mailing list