[PATCH V2 1/3] gpio: pca953x: make the register access by GPIO bank

Maxime Ripard maxime.ripard at free-electrons.com
Tue Jan 8 03:32:54 EST 2013


Hi Gregory,

On 07/01/2013 23:51, Gregory CLEMENT wrote:
> -static int pca953x_write_reg(struct pca953x_chip *chip, int reg, u32 val)
> +static int pca953x_read_single(struct pca953x_chip *chip, int reg, u32 *val,
> +				int off)
> +{
> +	int ret;
> +	int bank_shift = fls((chip->gpio_chip.ngpio - 1) / BANK_SZ);
> +	int offset = off / BANK_SZ;
> +
> +	ret = i2c_smbus_read_byte_data(chip->client,
> +				(reg << bank_shift) + offset);
> +	*val = ret;
> +
> +	if (ret < 0) {
> +		dev_err(&chip->client->dev, "failed reading register\n", reg);

This triggers a warning, since you have an argument but nothing corresponding to it in your format string.

>  static irqreturn_t pca953x_irq_handler(int irq, void *devid)
>  {
>  	struct pca953x_chip *chip = devid;
> -	u32 pending;
> -	u32 level;
> +	u8 pending[MAX_BANK];
> +	u8 level;
> +	int i;
>  
> -	pending = pca953x_irq_pending(chip);
> -
> -	if (!pending)
> +	if (!pca953x_irq_pending(chip, pending))
>  		return IRQ_HANDLED;
>  
> -	do {
> -		level = __ffs(pending);
> -		handle_nested_irq(irq_find_mapping(chip->domain, level));
> -
> -		pending &= ~(1 << level);
> -	} while (pending);
> +	for (i = 0; i < NBANK(chip); i++) {
> +		do {
> +			level = __ffs(pending[i]);
> +			handle_nested_irq(irq_find_mapping(chip->domain,
> +							level + (BANK_SZ * i)));
> +			pending[i] &= ~(1 << level);
> +		} while (pending[i]);
> +	}
>  
>  	return IRQ_HANDLED;
>  }

This triggers the following warning when an interrupt is raised:

[   30.773500] ------------[ cut here ]------------
[   30.778843] WARNING: at /home/tmp/linux/kernel/irq/irqdomain.c:137 irq_domain_legacy_revmap+0x2c/0x48()
[   30.788375] Modules linked in:
[   30.791531] [<c0014100>] (unwind_backtrace+0x0/0xf0) from [<c001c878>] (warn_slowpath_common+0x4c/0x64)
[   30.801125] [<c001c878>] (warn_slowpath_common+0x4c/0x64) from [<c001c8ac>] (warn_slowpath_null+0x1c/0x24)
[   30.810968] [<c001c8ac>] (warn_slowpath_null+0x1c/0x24) from [<c006b5e0>] (irq_domain_legacy_revmap+0x2c/0x48)
[   30.821187] [<c006b5e0>] (irq_domain_legacy_revmap+0x2c/0x48) from [<c01c3734>] (pca953x_irq_handler+0x16c/0x1ac)
[   30.831656] [<c01c3734>] (pca953x_irq_handler+0x16c/0x1ac) from [<c0068688>] (irq_thread+0xd0/0x124)
[   30.841000] [<c0068688>] (irq_thread+0xd0/0x124) from [<c003c238>] (kthread+0xa4/0xb0)
[   30.849125] [<c003c238>] (kthread+0xa4/0xb0) from [<c000ed48>] (ret_from_fork+0x14/0x2c)
[   30.857375] ---[ end trace 09584b7a73100a49 ]---

Maxime

-- 
Maxime Ripard, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com



More information about the linux-arm-kernel mailing list