[PATCH 2/2] ab8500: promote ab8500_fg probe before ab8500_btemp probe

[Anton Vorontsov]

On Mon, Dec 03, 2012 at 11:42:55PM +0530, Rajanikanth H.V wrote:
> From: "Rajanikanth H.V" <rajanikanth.hv at stericsson.com>
> 
> ab8500_fg driver prepares instance list of fuelgauge which is
> required by btemp driver for battery identification. So make sure
> that ab8500 fuelgauge list is ready before btemp driver starts.
> 
> for '3.7-rc5': of git://git.infradead.org/battery-2.6.git
> 
> Acked-by: Lee Jones <lee.jones at linaro.org>
> Signed-off-by: Rajanikanth H.V <rajanikanth.hv at stericsson.com>
> ---

This one, and "1/2 v2" applied, thanks!

>  drivers/power/Makefile |    2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/power/Makefile b/drivers/power/Makefile
> index 696e3a9..070c73d 100644
> --- a/drivers/power/Makefile
> +++ b/drivers/power/Makefile
> @@ -38,7 +38,7 @@ obj-$(CONFIG_CHARGER_PCF50633)	+= pcf50633-charger.o
>  obj-$(CONFIG_BATTERY_JZ4740)	+= jz4740-battery.o
>  obj-$(CONFIG_BATTERY_INTEL_MID)	+= intel_mid_battery.o
>  obj-$(CONFIG_BATTERY_RX51)	+= rx51_battery.o
> -obj-$(CONFIG_AB8500_BM)		+= ab8500_bmdata.o ab8500_charger.o ab8500_btemp.o ab8500_fg.o abx500_chargalg.o
> +obj-$(CONFIG_AB8500_BM)		+= ab8500_bmdata.o ab8500_charger.o ab8500_fg.o ab8500_btemp.o abx500_chargalg.o
>  obj-$(CONFIG_CHARGER_ISP1704)	+= isp1704_charger.o
>  obj-$(CONFIG_CHARGER_MAX8903)	+= max8903_charger.o
>  obj-$(CONFIG_CHARGER_TWL4030)	+= twl4030_charger.o
> -- 
> 1.7.10.4