[PATCH v3 2/7] vexpress: Match the "arm, sp810" DT entry for clock initialisation

[Catalin Marinas]

On Fri, Jan 04, 2013 at 03:37:37PM +0000, Christopher Covington wrote:
> On 01/04/2013 09:17 AM, Catalin Marinas wrote:
> > Currently the clk-vexpress.c implementation relies on the vexpress code
> > to call the vexpress_clk_of_init() function which performs the SP810
> > initialisation. This patch adds "arm,sp810" to the clock DT match array
> > allowing of_clk_init() to call the vexpress_sp810_of_setup() function.
> > In case of CONFIG_ARM64, make vexpress_clk_of_init() an arch_initcall().
> > 
> > Note that SP810 requires the fixed clocks to be already registered.
> > Since the clock subsystem does not handle DT dependencies, the
> > corresponding DT entries must be in the correct order.
> > 
> > Signed-off-by: Catalin Marinas <catalin.marinas at arm.com>
> > Cc: Pawel Moll <pawel.moll at arm.com>
> > ---
> >  drivers/clk/versatile/clk-vexpress.c | 28 +++++++++++++++++-----------
> >  include/linux/vexpress.h             |  2 +-
> >  2 files changed, 18 insertions(+), 12 deletions(-)
> > 
> > diff --git a/drivers/clk/versatile/clk-vexpress.c b/drivers/clk/versatile/clk-vexpress.c
> > index 4f83ff9..a3754e7 100644
> > --- a/drivers/clk/versatile/clk-vexpress.c
> > +++ b/drivers/clk/versatile/clk-vexpress.c
> 
> [...]
> 
> > @@ -138,4 +128,20 @@ void __init vexpress_clk_of_init(void)
> >  				"v2m-timer1", "sp804"));
> >  }
> >  
> > +static const __initconst struct of_device_id vexpress_clk_match[] = {
> > +	{ .compatible = "fixed-clock", .data = of_fixed_clk_setup, },
> > +	{ .compatible = "arm,vexpress-osc", .data = vexpress_osc_of_setup, },
> > +	{ .compatible = "arm,sp810", .data = vexpress_sp810_of_setup, },
> > +	{}
> > +};
> > +
> > +int __init vexpress_clk_of_init(void)
> > +{
> > +	of_clk_init(vexpress_clk_match);
> > +	return 0;
> > +}
> > +#ifdef CONFIG_ARM64
> > +arch_initcall(vexpress_clk_of_init);
> > +#endif
> 
> Any way to avoid the ifdef? Is it intended to be a temporarily solution?

It's harder since ARMv7 vexpress needs to initialise the clocks earlier
(v2m_dt_timer_init). On ARMv8 we always have the architected timers and
can afford an arch_initcall() here.

-- 
Catalin