[PATCH] ARM: Kirkwood: Bundle the common pinctrl of 88f6281 and 88f6282

Valentin Longchamp valentin.longchamp at keymile.com
Thu Jan 3 10:56:42 EST 2013


On 12/27/2012 08:40 PM, Andrew Lunn wrote:
> On Thu, Dec 27, 2012 at 12:05:24PM -0500, Jason Cooper wrote:
>> On Sun, Dec 23, 2012 at 11:35:49AM +0900, Nobuhiro Iwamatsu wrote:
>>> 88f6281 and 88f6282 has common pinctrl.
>>> This buldles the common pincrtl of these to kirkwood-628x-base.dtsi.
>>>
>>> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu at nigauri.org>
>>> ---
>>>  arch/arm/boot/dts/kirkwood-6281.dtsi      |   38 ++------------------------
>>>  arch/arm/boot/dts/kirkwood-6282.dtsi      |   35 ++----------------------
>>>  arch/arm/boot/dts/kirkwood-628x-base.dtsi |   41 +++++++++++++++++++++++++++++
>>
>> Is there a reason we can't move the contents of the proposed
>> kirkwood-628x-base.dtsi into kirkwood.dtsi ?
> 
> Hi Jason
> 
> It might cause problems for kirkwood-98DX4122. I'm assuming this
> kirkwood embedded inside a Marvell switch will require a different
> pinctrl. I've no idea what pins it actually has, so i cannot really
> say.
> 
>> Also, please don't forget to CC Andrew Lunn and myself for kirkwood
>> patches.  I've added him.
> 
> I added Valentin Longchamp to CC: who might be able to tell us if any
> of common pinctrl below is also common to 98DX4122.

Hi Andrew,

There are common pins on the kirkwood-98DX4122:
- nand
- spi
- twsi0
- uart0
- uart1

However, these are not present:

- sata0
- sata1
- sdio

One solution would then be to have the first five in a kirkwood-xyz-base.dtsi
that could be included in all the 3 kirkwood-[6281|6282|98dx4122].dtsi files
(that would then contain the remaining 3 for both the 6281 6282).

Valentin

> 
>    Andrew
> 
> 
>>>  3 files changed, 45 insertions(+), 69 deletions(-)
>>>  create mode 100644 arch/arm/boot/dts/kirkwood-628x-base.dtsi
>>>
>>> diff --git a/arch/arm/boot/dts/kirkwood-6281.dtsi b/arch/arm/boot/dts/kirkwood-6281.dtsi
>>> index d6c9d65..c8fe885 100644
>>> --- a/arch/arm/boot/dts/kirkwood-6281.dtsi
>>> +++ b/arch/arm/boot/dts/kirkwood-6281.dtsi
>>> @@ -1,44 +1,10 @@
>>> +/include/ "kirkwood-628x-base.dtsi"
>>> +
>>>  / {
>>>  	ocp at f1000000 {
>>>  		pinctrl: pinctrl at 10000 {
>>>  			compatible = "marvell,88f6281-pinctrl";
>>>  			reg = <0x10000 0x20>;
>>> -
>>> -			pmx_nand: pmx-nand {
>>> -				marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3",
>>> -					       "mpp4", "mpp5", "mpp18",
>>> -					       "mpp19";
>>> -				marvell,function = "nand";
>>> -			};
>>> -			pmx_sata0: pmx-sata0 {
>>> -				marvell,pins = "mpp5", "mpp21", "mpp23";
>>> -				marvell,function = "sata0";
>>> -			};
>>> -			pmx_sata1: pmx-sata1 {
>>> -				marvell,pins = "mpp4", "mpp20", "mpp22";
>>> -				marvell,function = "sata1";
>>> -			};
>>> -			pmx_spi: pmx-spi {
>>> -				marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3";
>>> -				marvell,function = "spi";
>>> -			};
>>> -			pmx_twsi0: pmx-twsi0 {
>>> -				marvell,pins = "mpp8", "mpp9";
>>> -				marvell,function = "twsi0";
>>> -			};
>>> -			pmx_uart0: pmx-uart0 {
>>> -				marvell,pins = "mpp10", "mpp11";
>>> -				marvell,function = "uart0";
>>> -			};
>>> -			pmx_uart1: pmx-uart1 {
>>> -				marvell,pins = "mpp13", "mpp14";
>>> -				marvell,function = "uart1";
>>> -			};
>>> -			pmx_sdio: pmx-sdio {
>>> -				marvell,pins = "mpp12", "mpp13", "mpp14",
>>> -					       "mpp15", "mpp16", "mpp17";
>>> -				marvell,function = "sdio";
>>> -			};
>>>  		};
>>>  	};
>>>  };
>>> diff --git a/arch/arm/boot/dts/kirkwood-6282.dtsi b/arch/arm/boot/dts/kirkwood-6282.dtsi
>>> index e0a779c..7ce9614 100644
>>> --- a/arch/arm/boot/dts/kirkwood-6282.dtsi
>>> +++ b/arch/arm/boot/dts/kirkwood-6282.dtsi
>>> @@ -1,3 +1,5 @@
>>> +/include/ "kirkwood-628x-base.dtsi"
>>> +
>>>  / {
>>>  	ocp at f1000000 {
>>>  
>>> @@ -5,43 +7,10 @@
>>>  			compatible = "marvell,88f6282-pinctrl";
>>>  			reg = <0x10000 0x20>;
>>>  
>>> -			pmx_nand: pmx-nand {
>>> -				marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3",
>>> -							"mpp4", "mpp5", "mpp18", "mpp19";
>>> -				marvell,function = "nand";
>>> -			};
>>> -
>>> -			pmx_sata0: pmx-sata0 {
>>> -				marvell,pins = "mpp5", "mpp21", "mpp23";
>>> -				marvell,function = "sata0";
>>> -			};
>>> -			pmx_sata1: pmx-sata1 {
>>> -				marvell,pins = "mpp4", "mpp20", "mpp22";
>>> -				marvell,function = "sata1";
>>> -			};
>>> -			pmx_spi: pmx-spi {
>>> -				marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3";
>>> -				marvell,function = "spi";
>>> -			};
>>> -			pmx_twsi0: pmx-twsi0 {
>>> -				marvell,pins = "mpp8", "mpp9";
>>> -				marvell,function = "twsi0";
>>> -			};
>>> -
>>>  			pmx_twsi1: pmx-twsi1 {
>>>  				marvell,pins = "mpp36", "mpp37";
>>>  				marvell,function = "twsi1";
>>>  			};
>>> -
>>> -			pmx_uart0: pmx-uart0 {
>>> -				marvell,pins = "mpp10", "mpp11";
>>> -				marvell,function = "uart0";
>>> -			};
>>> -
>>> -			pmx_uart1: pmx-uart1 {
>>> -				marvell,pins = "mpp13", "mpp14";
>>> -				marvell,function = "uart1";
>>> -			};
>>>  		};
>>>  
>>>  		i2c at 11100 {
>>> diff --git a/arch/arm/boot/dts/kirkwood-628x-base.dtsi b/arch/arm/boot/dts/kirkwood-628x-base.dtsi
>>> new file mode 100644
>>> index 0000000..c8103b6
>>> --- /dev/null
>>> +++ b/arch/arm/boot/dts/kirkwood-628x-base.dtsi
>>> @@ -0,0 +1,41 @@
>>> +/ {
>>> +	ocp at f1000000 {
>>> +		pinctrl: pinctrl at 10000 {
>>> +			pmx_nand: pmx-nand {
>>> +				marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3",
>>> +					       "mpp4", "mpp5", "mpp18",
>>> +					       "mpp19";
>>> +				marvell,function = "nand";
>>> +			};
>>> +			pmx_sata0: pmx-sata0 {
>>> +				marvell,pins = "mpp5", "mpp21", "mpp23";
>>> +				marvell,function = "sata0";
>>> +			};
>>> +			pmx_sata1: pmx-sata1 {
>>> +				marvell,pins = "mpp4", "mpp20", "mpp22";
>>> +				marvell,function = "sata1";
>>> +			};
>>> +			pmx_spi: pmx-spi {
>>> +				marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3";
>>> +				marvell,function = "spi";
>>> +			};
>>> +			pmx_twsi0: pmx-twsi0 {
>>> +				marvell,pins = "mpp8", "mpp9";
>>> +				marvell,function = "twsi0";
>>> +			};
>>> +			pmx_uart0: pmx-uart0 {
>>> +				marvell,pins = "mpp10", "mpp11";
>>> +				marvell,function = "uart0";
>>> +			};
>>> +			pmx_uart1: pmx-uart1 {
>>> +				marvell,pins = "mpp13", "mpp14";
>>> +				marvell,function = "uart1";
>>> +			};
>>> +			pmx_sdio: pmx-sdio {
>>> +				marvell,pins = "mpp12", "mpp13", "mpp14",
>>> +					       "mpp15", "mpp16", "mpp17";
>>> +				marvell,function = "sdio";
>>> +			};
>>> +		};
>>> +	};
>>> +};
>>> -- 
>>> 1.7.10.4
>>>
>>>
>>> _______________________________________________
>>> linux-arm-kernel mailing list
>>> linux-arm-kernel at lists.infradead.org
>>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel




More information about the linux-arm-kernel mailing list