[PATCH 2/2] irqchip: vt8500: Move irq code to drivers/irqchip
Rob Herring
robherring2 at gmail.com
Wed Jan 2 23:38:29 EST 2013
On 01/02/2013 09:25 PM, Tony Prisk wrote:
> Move mach-vt8500/irq.c to drivers/irqchip/irq-vt8500.c and make
> necessary Makefile changes. No code changes required.
>
> Signed-off-by: Tony Prisk <linux at prisktech.co.nz>
> ---
> CC: Thomas Gleixner <tglx at linutronix.de>
> arch/arm/mach-vt8500/Makefile | 2 +-
> arch/arm/mach-vt8500/common.h | 7 +-
> arch/arm/mach-vt8500/irq.c | 253 -----------------------------------------
> drivers/irqchip/Makefile | 1 +
> drivers/irqchip/irq-vt8500.c | 253 +++++++++++++++++++++++++++++++++++++++++
It's easy to forget, but please post using the -M option so only real
changes are shown.
> 5 files changed, 258 insertions(+), 258 deletions(-)
> delete mode 100644 arch/arm/mach-vt8500/irq.c
> create mode 100644 drivers/irqchip/irq-vt8500.c
>
> diff --git a/arch/arm/mach-vt8500/Makefile b/arch/arm/mach-vt8500/Makefile
> index 92ceb24..4c8a846 100644
> --- a/arch/arm/mach-vt8500/Makefile
> +++ b/arch/arm/mach-vt8500/Makefile
> @@ -1 +1 @@
> -obj-$(CONFIG_ARCH_VT8500) += irq.o vt8500.o
> +obj-$(CONFIG_ARCH_VT8500) += vt8500.o
> diff --git a/arch/arm/mach-vt8500/common.h b/arch/arm/mach-vt8500/common.h
> index 5d37a4f..b198a81 100644
> --- a/arch/arm/mach-vt8500/common.h
> +++ b/arch/arm/mach-vt8500/common.h
> @@ -18,13 +18,12 @@
>
> #include <linux/of.h>
>
> -int __init vt8500_irq_init(struct device_node *node,
> - struct device_node *parent);
> -
> /* defined in drivers/clk/clk-vt8500.c */
> void __init vtwm_clk_init(void __iomem *pmc_base);
>
> -/* defined in irq.c */
> +/* defined in drivers/irqchip/irq.c */
> +int __init vt8500_irq_init(struct device_node *node,
> + struct device_node *parent);
> asmlinkage void vt8500_handle_irq(struct pt_regs *regs);
These should go away with irqchip infrastructure Thomas and I have been
working on. I plan to post updated version in the next day.
Rob
>
> /* defined in drivers/clocksource/vt8500_timer.c */
> diff --git a/arch/arm/mach-vt8500/irq.c b/arch/arm/mach-vt8500/irq.c
> deleted file mode 100644
> index b9cf5ce..0000000
> --- a/arch/arm/mach-vt8500/irq.c
> +++ /dev/null
> @@ -1,253 +0,0 @@
> -/*
> - * arch/arm/mach-vt8500/irq.c
> - *
> - * Copyright (C) 2012 Tony Prisk <linux at prisktech.co.nz>
> - * Copyright (C) 2010 Alexey Charkov <alchark at gmail.com>
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License as published by
> - * the Free Software Foundation; either version 2 of the License, or
> - * (at your option) any later version.
> - *
> - * This program is distributed in the hope that it will be useful,
> - * but WITHOUT ANY WARRANTY; without even the implied warranty of
> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> - * GNU General Public License for more details.
> - *
> - * You should have received a copy of the GNU General Public License
> - * along with this program; if not, write to the Free Software
> - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
> - */
> -
> -/*
> - * This file is copied and modified from the original irq.c provided by
> - * Alexey Charkov. Minor changes have been made for Device Tree Support.
> - */
> -
> -#include <linux/slab.h>
> -#include <linux/io.h>
> -#include <linux/irq.h>
> -#include <linux/irqdomain.h>
> -#include <linux/interrupt.h>
> -#include <linux/bitops.h>
> -
> -#include <linux/of.h>
> -#include <linux/of_irq.h>
> -#include <linux/of_address.h>
> -
> -#include <asm/irq.h>
> -#include <asm/exception.h>
> -
> -#define VT8500_ICPC_IRQ 0x20
> -#define VT8500_ICPC_FIQ 0x24
> -#define VT8500_ICDC 0x40 /* Destination Control 64*u32 */
> -#define VT8500_ICIS 0x80 /* Interrupt status, 16*u32 */
> -
> -/* ICPC */
> -#define ICPC_MASK 0x3F
> -#define ICPC_ROTATE BIT(6)
> -
> -/* IC_DCTR */
> -#define ICDC_IRQ 0x00
> -#define ICDC_FIQ 0x01
> -#define ICDC_DSS0 0x02
> -#define ICDC_DSS1 0x03
> -#define ICDC_DSS2 0x04
> -#define ICDC_DSS3 0x05
> -#define ICDC_DSS4 0x06
> -#define ICDC_DSS5 0x07
> -
> -#define VT8500_INT_DISABLE 0
> -#define VT8500_INT_ENABLE BIT(3)
> -
> -#define VT8500_TRIGGER_HIGH 0
> -#define VT8500_TRIGGER_RISING BIT(5)
> -#define VT8500_TRIGGER_FALLING BIT(6)
> -#define VT8500_EDGE ( VT8500_TRIGGER_RISING \
> - | VT8500_TRIGGER_FALLING)
> -
> -/* vt8500 has 1 intc, wm8505 and wm8650 have 2 */
> -#define VT8500_INTC_MAX 2
> -
> -struct vt8500_irq_data {
> - void __iomem *base; /* IO Memory base address */
> - struct irq_domain *domain; /* Domain for this controller */
> -};
> -
> -/* Global variable for accessing io-mem addresses */
> -static struct vt8500_irq_data intc[VT8500_INTC_MAX];
> -static u32 active_cnt = 0;
> -
> -static void vt8500_irq_mask(struct irq_data *d)
> -{
> - struct vt8500_irq_data *priv = d->domain->host_data;
> - void __iomem *base = priv->base;
> - void __iomem *stat_reg = base + VT8500_ICIS + (d->hwirq < 32 ? 0 : 4);
> - u8 edge, dctr;
> - u32 status;
> -
> - edge = readb(base + VT8500_ICDC + d->hwirq) & VT8500_EDGE;
> - if (edge) {
> - status = readl(stat_reg);
> -
> - status |= (1 << (d->hwirq & 0x1f));
> - writel(status, stat_reg);
> - } else {
> - dctr = readb(base + VT8500_ICDC + d->hwirq);
> - dctr &= ~VT8500_INT_ENABLE;
> - writeb(dctr, base + VT8500_ICDC + d->hwirq);
> - }
> -}
> -
> -static void vt8500_irq_unmask(struct irq_data *d)
> -{
> - struct vt8500_irq_data *priv = d->domain->host_data;
> - void __iomem *base = priv->base;
> - u8 dctr;
> -
> - dctr = readb(base + VT8500_ICDC + d->hwirq);
> - dctr |= VT8500_INT_ENABLE;
> - writeb(dctr, base + VT8500_ICDC + d->hwirq);
> -}
> -
> -static int vt8500_irq_set_type(struct irq_data *d, unsigned int flow_type)
> -{
> - struct vt8500_irq_data *priv = d->domain->host_data;
> - void __iomem *base = priv->base;
> - u8 dctr;
> -
> - dctr = readb(base + VT8500_ICDC + d->hwirq);
> - dctr &= ~VT8500_EDGE;
> -
> - switch (flow_type) {
> - case IRQF_TRIGGER_LOW:
> - return -EINVAL;
> - case IRQF_TRIGGER_HIGH:
> - dctr |= VT8500_TRIGGER_HIGH;
> - __irq_set_handler_locked(d->irq, handle_level_irq);
> - break;
> - case IRQF_TRIGGER_FALLING:
> - dctr |= VT8500_TRIGGER_FALLING;
> - __irq_set_handler_locked(d->irq, handle_edge_irq);
> - break;
> - case IRQF_TRIGGER_RISING:
> - dctr |= VT8500_TRIGGER_RISING;
> - __irq_set_handler_locked(d->irq, handle_edge_irq);
> - break;
> - }
> - writeb(dctr, base + VT8500_ICDC + d->hwirq);
> -
> - return 0;
> -}
> -
> -static struct irq_chip vt8500_irq_chip = {
> - .name = "vt8500",
> - .irq_ack = vt8500_irq_mask,
> - .irq_mask = vt8500_irq_mask,
> - .irq_unmask = vt8500_irq_unmask,
> - .irq_set_type = vt8500_irq_set_type,
> -};
> -
> -static void __init vt8500_init_irq_hw(void __iomem *base)
> -{
> - u32 i;
> -
> - /* Enable rotating priority for IRQ */
> - writel(ICPC_ROTATE, base + VT8500_ICPC_IRQ);
> - writel(0x00, base + VT8500_ICPC_FIQ);
> -
> - /* Disable all interrupts and route them to IRQ */
> - for (i = 0; i < 64; i++)
> - writeb(VT8500_INT_DISABLE | ICDC_IRQ, base + VT8500_ICDC + i);
> -}
> -
> -static int vt8500_irq_map(struct irq_domain *h, unsigned int virq,
> - irq_hw_number_t hw)
> -{
> - irq_set_chip_and_handler(virq, &vt8500_irq_chip, handle_level_irq);
> - set_irq_flags(virq, IRQF_VALID);
> -
> - return 0;
> -}
> -
> -static struct irq_domain_ops vt8500_irq_domain_ops = {
> - .map = vt8500_irq_map,
> - .xlate = irq_domain_xlate_onecell,
> -};
> -
> -asmlinkage void __exception_irq_entry vt8500_handle_irq(struct pt_regs *regs)
> -{
> - u32 stat, i;
> - int irqnr, virq;
> - void __iomem *base;
> -
> - /* Loop through each active controller */
> - for (i=0; i<active_cnt; i++) {
> - base = intc[i].base;
> - irqnr = readl_relaxed(base) & 0x3F;
> - /*
> - Highest Priority register default = 63, so check that this
> - is a real interrupt by checking the status register
> - */
> - if (irqnr == 63) {
> - stat = readl_relaxed(base + VT8500_ICIS + 4);
> - if (!(stat & BIT(31)))
> - continue;
> - }
> -
> - virq = irq_find_mapping(intc[i].domain, irqnr);
> - handle_IRQ(virq, regs);
> - }
> -}
> -
> -int __init vt8500_irq_init(struct device_node *node, struct device_node *parent)
> -{
> - int irq, i;
> - struct device_node *np = node;
> -
> - if (active_cnt == VT8500_INTC_MAX) {
> - pr_err("%s: Interrupt controllers > VT8500_INTC_MAX\n",
> - __func__);
> - goto out;
> - }
> -
> - intc[active_cnt].base = of_iomap(np, 0);
> - intc[active_cnt].domain = irq_domain_add_linear(node, 64,
> - &vt8500_irq_domain_ops, &intc[active_cnt]);
> -
> - if (!intc[active_cnt].base) {
> - pr_err("%s: Unable to map IO memory\n", __func__);
> - goto out;
> - }
> -
> - if (!intc[active_cnt].domain) {
> - pr_err("%s: Unable to add irq domain!\n", __func__);
> - goto out;
> - }
> -
> - vt8500_init_irq_hw(intc[active_cnt].base);
> -
> - pr_info("vt8500-irq: Added interrupt controller\n");
> -
> - active_cnt++;
> -
> - /* check if this is a slaved controller */
> - if (of_irq_count(np) != 0) {
> - /* check that we have the correct number of interrupts */
> - if (of_irq_count(np) != 8) {
> - pr_err("%s: Incorrect IRQ map for slaved controller\n",
> - __func__);
> - return -EINVAL;
> - }
> -
> - for (i = 0; i < 8; i++) {
> - irq = irq_of_parse_and_map(np, i);
> - enable_irq(irq);
> - }
> -
> - pr_info("vt8500-irq: Enabled slave->parent interrupts\n");
> - }
> -out:
> - return 0;
> -}
> -
> diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
> index bf4609a..4b0da48 100644
> --- a/drivers/irqchip/Makefile
> +++ b/drivers/irqchip/Makefile
> @@ -1,4 +1,5 @@
> obj-$(CONFIG_ARCH_BCM2835) += irq-bcm2835.o
> obj-$(CONFIG_ARCH_SUNXI) += irq-sunxi.o
> +obj-$(CONFIG_ARCH_VT8500) += irq-vt8500.o
> obj-$(CONFIG_VERSATILE_FPGA_IRQ) += irq-versatile-fpga.o
> obj-$(CONFIG_ARCH_SPEAR3XX) += spear-shirq.o
> diff --git a/drivers/irqchip/irq-vt8500.c b/drivers/irqchip/irq-vt8500.c
> new file mode 100644
> index 0000000..b9cf5ce
> --- /dev/null
> +++ b/drivers/irqchip/irq-vt8500.c
> @@ -0,0 +1,253 @@
> +/*
> + * arch/arm/mach-vt8500/irq.c
> + *
> + * Copyright (C) 2012 Tony Prisk <linux at prisktech.co.nz>
> + * Copyright (C) 2010 Alexey Charkov <alchark at gmail.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
> + */
> +
> +/*
> + * This file is copied and modified from the original irq.c provided by
> + * Alexey Charkov. Minor changes have been made for Device Tree Support.
> + */
> +
> +#include <linux/slab.h>
> +#include <linux/io.h>
> +#include <linux/irq.h>
> +#include <linux/irqdomain.h>
> +#include <linux/interrupt.h>
> +#include <linux/bitops.h>
> +
> +#include <linux/of.h>
> +#include <linux/of_irq.h>
> +#include <linux/of_address.h>
> +
> +#include <asm/irq.h>
> +#include <asm/exception.h>
> +
> +#define VT8500_ICPC_IRQ 0x20
> +#define VT8500_ICPC_FIQ 0x24
> +#define VT8500_ICDC 0x40 /* Destination Control 64*u32 */
> +#define VT8500_ICIS 0x80 /* Interrupt status, 16*u32 */
> +
> +/* ICPC */
> +#define ICPC_MASK 0x3F
> +#define ICPC_ROTATE BIT(6)
> +
> +/* IC_DCTR */
> +#define ICDC_IRQ 0x00
> +#define ICDC_FIQ 0x01
> +#define ICDC_DSS0 0x02
> +#define ICDC_DSS1 0x03
> +#define ICDC_DSS2 0x04
> +#define ICDC_DSS3 0x05
> +#define ICDC_DSS4 0x06
> +#define ICDC_DSS5 0x07
> +
> +#define VT8500_INT_DISABLE 0
> +#define VT8500_INT_ENABLE BIT(3)
> +
> +#define VT8500_TRIGGER_HIGH 0
> +#define VT8500_TRIGGER_RISING BIT(5)
> +#define VT8500_TRIGGER_FALLING BIT(6)
> +#define VT8500_EDGE ( VT8500_TRIGGER_RISING \
> + | VT8500_TRIGGER_FALLING)
> +
> +/* vt8500 has 1 intc, wm8505 and wm8650 have 2 */
> +#define VT8500_INTC_MAX 2
> +
> +struct vt8500_irq_data {
> + void __iomem *base; /* IO Memory base address */
> + struct irq_domain *domain; /* Domain for this controller */
> +};
> +
> +/* Global variable for accessing io-mem addresses */
> +static struct vt8500_irq_data intc[VT8500_INTC_MAX];
> +static u32 active_cnt = 0;
> +
> +static void vt8500_irq_mask(struct irq_data *d)
> +{
> + struct vt8500_irq_data *priv = d->domain->host_data;
> + void __iomem *base = priv->base;
> + void __iomem *stat_reg = base + VT8500_ICIS + (d->hwirq < 32 ? 0 : 4);
> + u8 edge, dctr;
> + u32 status;
> +
> + edge = readb(base + VT8500_ICDC + d->hwirq) & VT8500_EDGE;
> + if (edge) {
> + status = readl(stat_reg);
> +
> + status |= (1 << (d->hwirq & 0x1f));
> + writel(status, stat_reg);
> + } else {
> + dctr = readb(base + VT8500_ICDC + d->hwirq);
> + dctr &= ~VT8500_INT_ENABLE;
> + writeb(dctr, base + VT8500_ICDC + d->hwirq);
> + }
> +}
> +
> +static void vt8500_irq_unmask(struct irq_data *d)
> +{
> + struct vt8500_irq_data *priv = d->domain->host_data;
> + void __iomem *base = priv->base;
> + u8 dctr;
> +
> + dctr = readb(base + VT8500_ICDC + d->hwirq);
> + dctr |= VT8500_INT_ENABLE;
> + writeb(dctr, base + VT8500_ICDC + d->hwirq);
> +}
> +
> +static int vt8500_irq_set_type(struct irq_data *d, unsigned int flow_type)
> +{
> + struct vt8500_irq_data *priv = d->domain->host_data;
> + void __iomem *base = priv->base;
> + u8 dctr;
> +
> + dctr = readb(base + VT8500_ICDC + d->hwirq);
> + dctr &= ~VT8500_EDGE;
> +
> + switch (flow_type) {
> + case IRQF_TRIGGER_LOW:
> + return -EINVAL;
> + case IRQF_TRIGGER_HIGH:
> + dctr |= VT8500_TRIGGER_HIGH;
> + __irq_set_handler_locked(d->irq, handle_level_irq);
> + break;
> + case IRQF_TRIGGER_FALLING:
> + dctr |= VT8500_TRIGGER_FALLING;
> + __irq_set_handler_locked(d->irq, handle_edge_irq);
> + break;
> + case IRQF_TRIGGER_RISING:
> + dctr |= VT8500_TRIGGER_RISING;
> + __irq_set_handler_locked(d->irq, handle_edge_irq);
> + break;
> + }
> + writeb(dctr, base + VT8500_ICDC + d->hwirq);
> +
> + return 0;
> +}
> +
> +static struct irq_chip vt8500_irq_chip = {
> + .name = "vt8500",
> + .irq_ack = vt8500_irq_mask,
> + .irq_mask = vt8500_irq_mask,
> + .irq_unmask = vt8500_irq_unmask,
> + .irq_set_type = vt8500_irq_set_type,
> +};
> +
> +static void __init vt8500_init_irq_hw(void __iomem *base)
> +{
> + u32 i;
> +
> + /* Enable rotating priority for IRQ */
> + writel(ICPC_ROTATE, base + VT8500_ICPC_IRQ);
> + writel(0x00, base + VT8500_ICPC_FIQ);
> +
> + /* Disable all interrupts and route them to IRQ */
> + for (i = 0; i < 64; i++)
> + writeb(VT8500_INT_DISABLE | ICDC_IRQ, base + VT8500_ICDC + i);
> +}
> +
> +static int vt8500_irq_map(struct irq_domain *h, unsigned int virq,
> + irq_hw_number_t hw)
> +{
> + irq_set_chip_and_handler(virq, &vt8500_irq_chip, handle_level_irq);
> + set_irq_flags(virq, IRQF_VALID);
> +
> + return 0;
> +}
> +
> +static struct irq_domain_ops vt8500_irq_domain_ops = {
> + .map = vt8500_irq_map,
> + .xlate = irq_domain_xlate_onecell,
> +};
> +
> +asmlinkage void __exception_irq_entry vt8500_handle_irq(struct pt_regs *regs)
> +{
> + u32 stat, i;
> + int irqnr, virq;
> + void __iomem *base;
> +
> + /* Loop through each active controller */
> + for (i=0; i<active_cnt; i++) {
> + base = intc[i].base;
> + irqnr = readl_relaxed(base) & 0x3F;
> + /*
> + Highest Priority register default = 63, so check that this
> + is a real interrupt by checking the status register
> + */
> + if (irqnr == 63) {
> + stat = readl_relaxed(base + VT8500_ICIS + 4);
> + if (!(stat & BIT(31)))
> + continue;
> + }
> +
> + virq = irq_find_mapping(intc[i].domain, irqnr);
> + handle_IRQ(virq, regs);
> + }
> +}
> +
> +int __init vt8500_irq_init(struct device_node *node, struct device_node *parent)
> +{
> + int irq, i;
> + struct device_node *np = node;
> +
> + if (active_cnt == VT8500_INTC_MAX) {
> + pr_err("%s: Interrupt controllers > VT8500_INTC_MAX\n",
> + __func__);
> + goto out;
> + }
> +
> + intc[active_cnt].base = of_iomap(np, 0);
> + intc[active_cnt].domain = irq_domain_add_linear(node, 64,
> + &vt8500_irq_domain_ops, &intc[active_cnt]);
> +
> + if (!intc[active_cnt].base) {
> + pr_err("%s: Unable to map IO memory\n", __func__);
> + goto out;
> + }
> +
> + if (!intc[active_cnt].domain) {
> + pr_err("%s: Unable to add irq domain!\n", __func__);
> + goto out;
> + }
> +
> + vt8500_init_irq_hw(intc[active_cnt].base);
> +
> + pr_info("vt8500-irq: Added interrupt controller\n");
> +
> + active_cnt++;
> +
> + /* check if this is a slaved controller */
> + if (of_irq_count(np) != 0) {
> + /* check that we have the correct number of interrupts */
> + if (of_irq_count(np) != 8) {
> + pr_err("%s: Incorrect IRQ map for slaved controller\n",
> + __func__);
> + return -EINVAL;
> + }
> +
> + for (i = 0; i < 8; i++) {
> + irq = irq_of_parse_and_map(np, i);
> + enable_irq(irq);
> + }
> +
> + pr_info("vt8500-irq: Enabled slave->parent interrupts\n");
> + }
> +out:
> + return 0;
> +}
> +
>
More information about the linux-arm-kernel
mailing list