[PATCH v5 15/22] mfd: omap-usb-host: Manage HSIC clocks for HSIC mode
Roger Quadros
rogerq at ti.com
Wed Jan 2 10:00:35 EST 2013
Enable the optional HSIC clocks (60MHz and 480MHz) for the ports
that are configured in HSIC mode.
Signed-off-by: Roger Quadros <rogerq at ti.com>
---
drivers/mfd/omap-usb-host.c | 77 +++++++++++++++++++++++++++++++++++++++---
1 files changed, 71 insertions(+), 6 deletions(-)
diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
index 1c8e480..a58da22 100644
--- a/drivers/mfd/omap-usb-host.c
+++ b/drivers/mfd/omap-usb-host.c
@@ -93,6 +93,8 @@
struct usbhs_hcd_omap {
int nports;
struct clk **utmi_clk;
+ struct clk **hsic60m_clk;
+ struct clk **hsic480m_clk;
struct clk *xclk60mhsp1_ck;
struct clk *xclk60mhsp2_ck;
@@ -292,7 +294,28 @@ static int usbhs_runtime_resume(struct device *dev)
clk_enable(omap->ehci_logic_fck);
for (i = 0; i < omap->nports; i++) {
- if (is_ehci_tll_mode(pdata->port_mode[i])) {
+ switch (pdata->port_mode[i]) {
+ case OMAP_EHCI_PORT_MODE_HSIC:
+ if (omap->hsic60m_clk[i]) {
+ r = clk_enable(omap->hsic60m_clk[i]);
+ if (r) {
+ dev_err(dev,
+ "Can't enable port %d hsic60m clk:%d\n",
+ i, r);
+ }
+ }
+
+ if (omap->hsic480m_clk[i]) {
+ r = clk_enable(omap->hsic480m_clk[i]);
+ if (r) {
+ dev_err(dev,
+ "Can't enable port %d hsic480m clk:%d\n",
+ i, r);
+ }
+ }
+ /* Fall through as HSIC mode needs utmi_clk */
+
+ case OMAP_EHCI_PORT_MODE_TLL:
if (omap->utmi_clk[i]) {
r = clk_enable(omap->utmi_clk[i]);
if (r) {
@@ -301,6 +324,9 @@ static int usbhs_runtime_resume(struct device *dev)
i, r);
}
}
+ break;
+ default:
+ break;
}
}
@@ -321,9 +347,21 @@ static int usbhs_runtime_suspend(struct device *dev)
spin_lock_irqsave(&omap->lock, flags);
for (i = 0; i < omap->nports; i++) {
- if (is_ehci_tll_mode(pdata->port_mode[i])) {
+ switch (pdata->port_mode[i]) {
+ case OMAP_EHCI_PORT_MODE_HSIC:
+ if (omap->hsic60m_clk[i])
+ clk_disable(omap->hsic60m_clk[i]);
+
+ if (omap->hsic480m_clk[i])
+ clk_disable(omap->hsic480m_clk[i]);
+ /* Fall through as utmi_clks were used in HSIC mode */
+
+ case OMAP_EHCI_PORT_MODE_TLL:
if (omap->utmi_clk[i])
clk_disable(omap->utmi_clk[i]);
+ break;
+ default:
+ break;
}
}
@@ -528,7 +566,10 @@ static int usbhs_omap_probe(struct platform_device *pdev)
i = sizeof(struct clk *) * omap->nports;
omap->utmi_clk = devm_kzalloc(dev, i, GFP_KERNEL);
- if (!omap->utmi_clk) {
+ omap->hsic480m_clk = devm_kzalloc(dev, i, GFP_KERNEL);
+ omap->hsic60m_clk = devm_kzalloc(dev, i, GFP_KERNEL);
+
+ if (!omap->utmi_clk || !omap->hsic480m_clk || !omap->hsic60m_clk) {
dev_err(dev, "Memory allocation failed\n");
ret = -ENOMEM;
goto err_mem;
@@ -586,7 +627,7 @@ static int usbhs_omap_probe(struct platform_device *pdev)
for (i = 0; i < omap->nports; i++) {
struct clk *pclk;
- char clkname[] = "usb_host_hs_utmi_px_clk";
+ char clkname[] = "usb_host_hs_hsic480m_px_clk";
/* clock names are indexed from 1*/
snprintf(clkname, sizeof(clkname),
@@ -602,6 +643,24 @@ static int usbhs_omap_probe(struct platform_device *pdev)
clkname, PTR_ERR(pclk));
else
omap->utmi_clk[i] = pclk;
+
+ snprintf(clkname, sizeof(clkname),
+ "usb_host_hs_hsic480m_p%d_clk", i + 1);
+ pclk = clk_get(dev, clkname);
+ if (IS_ERR(pclk))
+ dev_dbg(dev, "Failed to get clock : %s : %ld\n",
+ clkname, PTR_ERR(pclk));
+ else
+ omap->hsic480m_clk[i] = pclk;
+
+ snprintf(clkname, sizeof(clkname),
+ "usb_host_hs_hsic60m_p%d_clk", i + 1);
+ pclk = clk_get(dev, clkname);
+ if (IS_ERR(pclk))
+ dev_dbg(dev, "Failed to get clock : %s : %ld\n",
+ clkname, PTR_ERR(pclk));
+ else
+ omap->hsic60m_clk[i] = pclk;
}
if (is_ehci_phy_mode(pdata->port_mode[0])) {
@@ -645,8 +704,11 @@ static int usbhs_omap_probe(struct platform_device *pdev)
err_alloc:
omap_usbhs_deinit(&pdev->dev);
- for (i = 0; i < omap->nports; i++)
+ for (i = 0; i < omap->nports; i++) {
clk_put(omap->utmi_clk[i]);
+ clk_put(omap->hsic60m_clk[i]);
+ clk_put(omap->hsic480m_clk[i]);
+ }
clk_put(omap->init_60m_fclk);
@@ -684,8 +746,11 @@ static int usbhs_omap_remove(struct platform_device *pdev)
omap_usbhs_deinit(&pdev->dev);
- for (i = 0; i < omap->nports; i++)
+ for (i = 0; i < omap->nports; i++) {
clk_put(omap->utmi_clk[i]);
+ clk_put(omap->hsic60m_clk[i]);
+ clk_put(omap->hsic480m_clk[i]);
+ }
clk_put(omap->init_60m_fclk);
clk_put(omap->utmi_p1_gfclk);
--
1.7.4.1
More information about the linux-arm-kernel
mailing list