[PATCH RESEND 1/1] ARM: DTS: OMAP4: Add OMAP4 Blaze Tablet support
Ruslan Bilovol
ruslan.bilovol at ti.com
Wed Feb 27 06:43:42 EST 2013
The OMAP4 Blaze Tablet is TI OMAP4 processor-based
development platform in a tablet formfactor.
The platform contains many of the features found in
present-day handsets (such as audio, video, wireless
functions and user interfaces) and in addition
contains features for software development and test.
This patch adds initial support for the OMAP4 Blaze
Tablet development platform. Additional functionality
depends on different drivers and code modifications that
are not upstreamed yet or do not support DT yet, so will
be added later.
Signed-off-by: Ruslan Bilovol <ruslan.bilovol at ti.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/omap4-blazetablet.dts | 390 +++++++++++++++++++++++++++++++
2 files changed, 391 insertions(+)
create mode 100644 arch/arm/boot/dts/omap4-blazetablet.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 5ebb44f..4f94a95 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -110,6 +110,7 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
omap4-panda-es.dtb \
omap4-var-som.dtb \
omap4-sdp.dtb \
+ omap4-blazetablet.dtb \
omap5-evm.dtb \
am335x-evm.dtb \
am335x-evmsk.dtb \
diff --git a/arch/arm/boot/dts/omap4-blazetablet.dts b/arch/arm/boot/dts/omap4-blazetablet.dts
new file mode 100644
index 0000000..d6be4dc
--- /dev/null
+++ b/arch/arm/boot/dts/omap4-blazetablet.dts
@@ -0,0 +1,390 @@
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * Author: Ruslan Bilovol <ruslan.bilovol at ti.com>
+ *
+ * based on omap4-sdp.dts
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/include/ "omap4.dtsi"
+/include/ "elpida_ecb240abacn.dtsi"
+
+/ {
+ model = "TI OMAP4 Blaze Tablet";
+ compatible = "ti,omap4-blazetablet", "ti,omap4430", "ti,omap4";
+
+ chosen {
+ bootargs = "root=/dev/mmcblk0p2 rootwait console=ttyO2,115200";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x40000000>; /* 1 GB */
+ };
+
+ vdd_eth: fixedregulator-vdd-eth {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD_ETH";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio2 16 0>; /* gpio line 48 */
+ enable-active-high;
+ regulator-boot-on;
+ };
+
+ vbat: fixedregulator-vbat {
+ compatible = "regulator-fixed";
+ regulator-name = "VBAT";
+ regulator-min-microvolt = <3750000>;
+ regulator-max-microvolt = <3750000>;
+ regulator-boot-on;
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+
+ volume_up {
+ label = "volume-up";
+ linux,code = <115>; /* KEY_VOLUMEUP */
+ gpios = <&gpio2 11 0>; /* 43 */
+ gpio-key,wakeup;
+ };
+
+ home {
+ label = "home";
+ linux,code = <102>; /* KEY_HOME */
+ gpios = <&gpio2 14 0>; /* 46 */
+ gpio-key,wakeup;
+ };
+
+ volume_down {
+ label = "volume-down";
+ linux,code = <114>; /* KEY_VOLUMEDOWN */
+ gpios = <&gpio2 15 0>; /* 47 */
+ gpio-key,wakeup;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ debug2 {
+ label = "omap4:green:debug2";
+ gpios = <&gpio6 13 0>; /* 173 */
+ };
+
+ debug4 {
+ label = "omap4:green:debug4";
+ gpios = <&gpio2 18 0>; /* 50 */
+ };
+
+ user1 {
+ label = "omap4:blue:user";
+ gpios = <&gpio6 9 0>; /* 169 */
+ };
+
+ user2 {
+ label = "omap4:red:user";
+ gpios = <&gpio6 10 0>; /* 170 */
+ };
+
+ user3 {
+ label = "omap4:green:user";
+ gpios = <&gpio6 14 0>; /* 174 */
+ };
+ };
+
+ sound {
+ compatible = "ti,abe-twl6040";
+ ti,model = "BlazeTablet";
+
+ ti,jack-detection = <1>;
+ ti,mclk-freq = <38400000>;
+
+ ti,mcpdm = <&mcpdm>;
+ ti,dmic = <&dmic>;
+
+ ti,twl6040 = <&twl6040>;
+
+ /* Audio routing */
+ ti,audio-routing =
+ "Headset Stereophone", "HSOL",
+ "Headset Stereophone", "HSOR",
+ "Ext Spk", "HFL",
+ "Ext Spk", "HFR",
+ "Line Out", "AUXL",
+ "Line Out", "AUXR",
+ "Vibrator", "VIBRAL",
+ "Vibrator", "VIBRAR",
+ "HSMIC", "Headset Mic",
+ "Headset Mic", "Headset Mic Bias",
+ "MAINMIC", "Main Handset Mic",
+ "Main Handset Mic", "Main Mic Bias",
+ "SUBMIC", "Sub Handset Mic",
+ "Sub Handset Mic", "Main Mic Bias",
+ "AFML", "Line In",
+ "AFMR", "Line In",
+ "DMic", "Digital Mic",
+ "Digital Mic", "Digital Mic1 Bias";
+ };
+};
+
+&omap4_pmx_core {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &twl6040_pins
+ &mcpdm_pins
+ &dmic_pins
+ &mcbsp1_pins
+ &mcbsp2_pins
+ &dss_hdmi_pins
+ &tpd12s015_pins
+ &gpio_keys_pins
+ &leds_pins
+ >;
+
+ gpio_keys_pins: pinmux_gpio_keys_pins {
+ pinctrl-single,pins = <
+ 0x26 0x11B /* gpmc_a19.gpio_43 INPUT_PULLUP | MODE3 */
+ 0x2C 0x11B /* gpmc_a22.gpio_46 INPUT_PULLUP | MODE3 */
+ 0x2E 0x11B /* gpmc_a22.gpio_47 INPUT_PULLUP | MODE3 */
+ >;
+ };
+
+ leds_pins: pinmux_led_pins {
+ pinctrl-single,pins = <
+ 0x34 0x3 /* gpmc_ncs0.gpio_50 OUTPUT | MODE3 */
+ 0x138 0x3 /* usbb2_hsic_data.gpio_169 OUTPUT | MODE3 */
+ 0x13a 0x3 /* usbb2_hsic_strobe.gpio_170 OUTPUT | MODE3 */
+ 0x140 0x3 /* kpd_col5.gpio_173 OUTPUT | MODE3 */
+ 0x142 0x3 /* kpd_col5.gpio_174 OUTPUT | MODE3 */
+ >;
+ };
+
+ uart2_pins: pinmux_uart2_pins {
+ pinctrl-single,pins = <
+ 0xd8 0x118 /* uart2_cts.uart2_cts INPUT_PULLUP | MODE0 */
+ 0xda 0 /* uart2_rts.uart2_rts OUTPUT | MODE0 */
+ 0xdc 0x118 /* uart2_rx.uart2_rx INPUT_PULLUP | MODE0 */
+ 0xde 0 /* uart2_tx.uart2_tx OUTPUT | MODE0 */
+ >;
+ };
+
+ uart3_pins: pinmux_uart3_pins {
+ pinctrl-single,pins = <
+ 0x100 0x118 /* uart3_cts_rctx.uart3_cts_rctx INPUT_PULLUP | MODE0 */
+ 0x102 0 /* uart3_rts_sd.uart3_rts_sd OUTPUT | MODE0 */
+ 0x104 0x100 /* uart3_rx_irrx.uart3_rx_irrx INPUT | MODE0 */
+ 0x106 0 /* uart3_tx_irtx.uart3_tx_irtx OUTPUT | MODE0 */
+ >;
+ };
+
+ uart4_pins: pinmux_uart4_pins {
+ pinctrl-single,pins = <
+ 0x11c 0x100 /* uart4_rx.uart4_rx INPUT | MODE0 */
+ 0x11e 0 /* uart4_tx.uart4_tx OUTPUT | MODE0 */
+ >;
+ };
+
+ twl6040_pins: pinmux_twl6040_pins {
+ pinctrl-single,pins = <
+ 0xe0 0x3 /* hdq_sio.gpio_127 OUTPUT | MODE3 */
+ 0x160 0x100 /* sys_nirq2.sys_nirq2 INPUT | MODE0 */
+ >;
+ };
+
+ mcpdm_pins: pinmux_mcpdm_pins {
+ pinctrl-single,pins = <
+ 0xc6 0x108 /* abe_pdm_ul_data.abe_pdm_ul_data INPUT PULLDOWN | MODE0 */
+ 0xc8 0x108 /* abe_pdm_dl_data.abe_pdm_dl_data INPUT PULLDOWN | MODE0 */
+ 0xca 0x118 /* abe_pdm_frame.abe_pdm_frame INPUT PULLUP | MODE0 */
+ 0xcc 0x108 /* abe_pdm_lb_clk.abe_pdm_lb_clk INPUT PULLDOWN | MODE0 */
+ 0xce 0x108 /* abe_clks.abe_clks INPUT PULLDOWN | MODE0 */
+ >;
+ };
+
+ dmic_pins: pinmux_dmic_pins {
+ pinctrl-single,pins = <
+ 0xd0 0 /* abe_dmic_clk1.abe_dmic_clk1 OUTPUT | MODE0 */
+ 0xd2 0x100 /* abe_dmic_din1.abe_dmic_din1 INPUT | MODE0 */
+ 0xd4 0x100 /* abe_dmic_din2.abe_dmic_din2 INPUT | MODE0 */
+ 0xd6 0x100 /* abe_dmic_din3.abe_dmic_din3 INPUT | MODE0 */
+ >;
+ };
+
+ mcbsp1_pins: pinmux_mcbsp1_pins {
+ pinctrl-single,pins = <
+ 0xbe 0x100 /* abe_mcbsp1_clkx.abe_mcbsp1_clkx INPUT | MODE0 */
+ 0xc0 0x108 /* abe_mcbsp1_dr.abe_mcbsp1_dr INPUT PULLDOWN | MODE0 */
+ 0xc2 0x8 /* abe_mcbsp1_dx.abe_mcbsp1_dx OUTPUT PULLDOWN | MODE0 */
+ 0xc4 0x100 /* abe_mcbsp1_fsx.abe_mcbsp1_fsx INPUT | MODE0 */
+ >;
+ };
+
+ mcbsp2_pins: pinmux_mcbsp2_pins {
+ pinctrl-single,pins = <
+ 0xb6 0x100 /* abe_mcbsp2_clkx.abe_mcbsp2_clkx INPUT | MODE0 */
+ 0xb8 0x108 /* abe_mcbsp2_dr.abe_mcbsp2_dr INPUT PULLDOWN | MODE0 */
+ 0xba 0x8 /* abe_mcbsp2_dx.abe_mcbsp2_dx OUTPUT PULLDOWN | MODE0 */
+ 0xbc 0x100 /* abe_mcbsp2_fsx.abe_mcbsp2_fsx INPUT | MODE0 */
+ >;
+ };
+
+ dss_hdmi_pins: pinmux_dss_hdmi_pins {
+ pinctrl-single,pins = <
+ 0x5a 0x118 /* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */
+ 0x5c 0x118 /* hdmi_scl.hdmi_scl INPUT PULLUP | MODE 0 */
+ 0x5e 0x118 /* hdmi_sda.hdmi_sda INPUT PULLUP | MODE 0 */
+ >;
+ };
+
+ tpd12s015_pins: pinmux_tpd12s015_pins {
+ pinctrl-single,pins = <
+ 0x22 0x3 /* gpmc_a17.gpio_41 OUTPUT | MODE3 */
+ 0x48 0x3 /* gpmc_nbe1.gpio_60 OUTPUT | MODE3 */
+ 0x58 0x10b /* hdmi_hpd.gpio_63 INPUT PULLDOWN | MODE3 */
+ >;
+ };
+};
+
+&i2c1 {
+ clock-frequency = <400000>;
+
+ twl: twl at 48 {
+ reg = <0x48>;
+ /* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */
+ interrupts = <0 7 4>; /* IRQ_SYS_1N cascaded to gic */
+ interrupt-parent = <&gic>;
+ };
+
+ twl6040: twl at 4b {
+ compatible = "ti,twl6040";
+ reg = <0x4b>;
+ /* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */
+ interrupts = <0 119 4>; /* IRQ_SYS_2N cascaded to gic */
+ interrupt-parent = <&gic>;
+ ti,audpwron-gpio = <&gpio4 31 0>; /* gpio line 127 */
+
+ vio-supply = <&v1v8>;
+ v2v1-supply = <&v2v1>;
+ enable-active-high;
+
+ /* regulators for vibra motor */
+ vddvibl-supply = <&vbat>;
+ vddvibr-supply = <&vbat>;
+
+ vibra {
+ /* Vibra driver, motor resistance parameters */
+ ti,vibldrv-res = <8>;
+ ti,vibrdrv-res = <3>;
+ ti,viblmotor-res = <10>;
+ ti,vibrmotor-res = <10>;
+ ti,vddvibl-uV = <0>; /* fixed volt supply - VBAT */
+ ti,vddvibr-uV = <0>; /* fixed volt supply - VBAT */
+ };
+ };
+};
+
+/include/ "twl6030.dtsi"
+
+&i2c2 {
+ clock-frequency = <400000>;
+};
+
+&i2c3 {
+ clock-frequency = <400000>;
+
+ /*
+ * Temperature Sensor
+ * http://www.ti.com/lit/ds/symlink/tmp105.pdf
+ */
+ tmp105 at 48 {
+ compatible = "ti,tmp105";
+ reg = <0x48>;
+ };
+};
+
+&i2c4 {
+ clock-frequency = <400000>;
+
+ /*
+ * BMP085 digital pressure sensor
+ */
+ pressure at 77 {
+ compatible = "bosch,bmp085";
+ reg = <0x77>;
+ };
+};
+
+&mcspi1 {
+ eth at 0 {
+ compatible = "ks8851";
+ spi-max-frequency = <24000000>;
+ reg = <0>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <2>; /* gpio line 34 */
+ vdd-supply = <&vdd_eth>;
+ };
+};
+
+&mmc1 {
+ vmmc-supply = <&vmmc>;
+ bus-width = <8>;
+};
+
+&mmc2 {
+ vmmc-supply = <&vaux1>;
+ bus-width = <8>;
+ ti,non-removable;
+};
+
+&mmc3 {
+ status = "disabled";
+};
+
+&mmc4 {
+ status = "disabled";
+};
+
+&mmc5 {
+ bus-width = <4>;
+ ti,non-removable;
+};
+
+&emif1 {
+ cs1-used;
+ device-handle = <&elpida_ECB240ABACN>;
+};
+
+&emif2 {
+ cs1-used;
+ device-handle = <&elpida_ECB240ABACN>;
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins>;
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart4_pins>;
+};
+
+&mcbsp3 {
+ status = "disabled";
+};
+
+&twl_usb_comparator {
+ usb-supply = <&vusb>;
+};
--
1.7.9.5
More information about the linux-arm-kernel
mailing list