[PATCH Resend v5 11/16] spi/spi-atmel: correct 16 bits transfers with DMA
Wenyou Yang
wenyou.yang at atmel.com
Tue Feb 26 19:46:23 EST 2013
From: Richard Genoud <richard.genoud at gmail.com>
Signed-off-by: Richard Genoud <richard.genoud at gmail.com>
Cc: spi-devel-general at lists.sourceforge.net
Cc: linux-kernel at vger.kernel.org
[wenyou.yang at atmel.com: submit the patch]
Signed-off-by: Wenyou Yang <wenyou.yang at atmel.com>
---
drivers/spi/spi-atmel.c | 17 +++++++++++------
1 file changed, 11 insertions(+), 6 deletions(-)
diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c
index 786a84b..00ca85f 100644
--- a/drivers/spi/spi-atmel.c
+++ b/drivers/spi/spi-atmel.c
@@ -389,12 +389,18 @@ static inline int atmel_spi_xfer_can_be_chained(struct spi_transfer *xfer)
}
static int atmel_spi_dma_slave_config(struct atmel_spi *as,
- struct dma_slave_config *slave_config)
+ struct dma_slave_config *slave_config,
+ u8 bits_per_word)
{
int err = 0;
- slave_config->dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
- slave_config->src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
+ if (bits_per_word > 8) {
+ slave_config->dst_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
+ slave_config->src_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
+ } else {
+ slave_config->dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
+ slave_config->src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
+ }
slave_config->dst_addr = (dma_addr_t)as->phybase + SPI_TDR;
slave_config->src_addr = (dma_addr_t)as->phybase + SPI_RDR;
@@ -455,7 +461,7 @@ static int atmel_spi_configure_dma(struct atmel_spi *as)
goto error;
}
- err = atmel_spi_dma_slave_config(as, &slave_config);
+ err = atmel_spi_dma_slave_config(as, &slave_config, 8);
if (err)
goto error;
@@ -589,10 +595,9 @@ static int atmel_spi_next_xfer_dma_submit(struct spi_master *master,
*plen = len;
- if (atmel_spi_dma_slave_config(as, &slave_config))
+ if (atmel_spi_dma_slave_config(as, &slave_config, 8))
goto err_exit;
-
/* Send both scatterlists */
rxdesc = rxchan->device->device_prep_slave_sg(rxchan,
&as->dma.sgrx,
--
1.7.9.5
More information about the linux-arm-kernel
mailing list