SMDKV210 support issue in kernel 3.8 (dma-pl330 and HDMI failed)

[Sylwester Nawrocki]

On 02/22/2013 01:00 PM, Lonsn wrote:
> Hi,
> I have tested the kernel 3.8 with a SMDKV210 like board. But I failed
> with dma-pl330 and HDMI driver.
> For dma-pl330, kernel print:
> dma-pl330 dma-pl330.0: PERIPH_ID 0x0, PCELL_ID 0x0 !
> dma-pl330: probe of dma-pl330.0 failed with error -22
> dma-pl330 dma-pl330.1: PERIPH_ID 0x0, PCELL_ID 0x0 !
> dma-pl330: probe of dma-pl330.1 failed with error -22

Maybe there is some issue with the PL330 DMA controller clocks and the
read values are all 0 because the clocks are disabled ?

It seems arch/arm/mach-s5pv210/clock.c might be missing "apb_pclk" clock
supply names, which I suspect may be required after commits:

commit 7c71b8eb268ee38235f7e924d943ea9d90e59469
Author: Inderpal Singh <inderpal.singh at linaro.org>
Date:   Fri Sep 7 12:14:48 2012 +0530

     DMA: PL330: Remove redundant runtime_suspend/resume functions

     The driver's  runtime_suspend/resume functions just disable/enable
     the clock which is already being managed at AMBA bus level
     runtime_suspend/resume functions.

     Hence, remove the driver's runtime_suspend/resume functions.

     Signed-off-by: Inderpal Singh <inderpal.singh at linaro.org>
     Tested-by: Chander Kashyap <chander.kashyap at linaro.org>
     Signed-off-by: Vinod Koul <vinod.koul at linux.intel.com>

commit faf6fbc6f2ca3b34bf464a8bb079a998e571957c
Author: Inderpal Singh <inderpal.singh at linaro.org>
Date:   Fri Sep 7 12:14:47 2012 +0530

     DMA: PL330: Remove controller clock enable/disable

     The controller clock is being enabled/disabled in AMBA bus
     infrastructre in probe/remove functions. Hence, its not required
     at driver level probe/remove.

     Signed-off-by: Inderpal Singh <inderpal.singh at linaro.org>
     Tested-by: Chander Kashyap <chander.kashyap at linaro.org>
     Signed-off-by: Vinod Koul <vinod.koul at linux.intel.com>

I have added people who made related changes at Cc, hopefully they
can provide some help in debugging this.

Please try the following change:

8<--------------------
diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c
index fcdf52d..87c7d3f 100644
--- a/arch/arm/mach-s5pv210/clock.c
+++ b/arch/arm/mach-s5pv210/clock.c
@@ -214,11 +214,6 @@ static struct clk clk_pcmcdclk2 = {
         .name           = "pcmcdclk",
  };

-static struct clk dummy_apb_pclk = {
-       .name           = "apb_pclk",
-       .id             = -1,
-};
-
  static struct clk *clkset_vpllsrc_list[] = {
         [0] = &clk_fin_vpll,
         [1] = &clk_sclk_hdmi27m,
@@ -1333,6 +1328,8 @@ static struct clk_lookup s5pv210_clk_lookup[] = {
         CLKDEV_INIT(NULL, "spi_busclk0", &clk_p),
         CLKDEV_INIT("s5pv210-spi.0", "spi_busclk1", &clk_sclk_spi0.clk),
         CLKDEV_INIT("s5pv210-spi.1", "spi_busclk1", &clk_sclk_spi1.clk),
+       CLKDEV_INIT("dma-pl330.0", "apb_pclk", &init_clocks_off[0]),
+       CLKDEV_INIT("dma-pl330.1", "apb_pclk", &init_clocks_off[1]),
  };

  void __init s5pv210_register_clocks(void)
@@ -1361,6 +1358,5 @@ void __init s5pv210_register_clocks(void)
         for (ptr = 0; ptr < ARRAY_SIZE(clk_cdev); ptr++)
                 s3c_disable_clocks(clk_cdev[ptr], 1);

-       s3c24xx_register_clock(&dummy_apb_pclk);
         s3c_pwmclk_init();
  }
8<--------------------

If it works then we could make some cleaner patch.

> For HDMI driver,
> I have added the following HDMI related code to
> arch/arm/mach-s5pv210/mach-smdkv210.c:
> /* I2C module and id for HDMIPHY */
> static struct i2c_board_info hdmiphy_info = {
> I2C_BOARD_INFO("hdmiphy-s5pv210", 0x38),
> };
>
> i2c_register_board_info(2, smdkv210_i2c_devs2,
> ARRAY_SIZE(smdkv210_i2c_devs2));
>
> s5p_i2c_hdmiphy_set_platdata(NULL);
> s5p_hdmi_set_platdata(&hdmiphy_info, NULL, 0);
>
> s3c_ide_set_platdata(&smdkv210_ide_pdata);
>
> then kernel print:
> s5p-hdmi s5pv210-hdmi: hdmiphy adapter request failed
> s5p-hdmi s5pv210-hdmi: probe failed
> Samsung TV Mixer driver, (c) 2010-2011 Samsung Electronics Co., Ltd.
>
> s5p-mixer s5p-mixer: probe start
> s5p-mixer s5p-mixer: resources acquired
> s5p-mixer s5p-mixer: module s5p-hdmi provides no subdev!
> s5p-mixer s5p-mixer: module s5p-sdo provides no subdev!
> s5p-mixer s5p-mixer: failed to register any output
> s5p-mixer s5p-mixer: probe failed
>
> Can anybody help me on how to config the HDMI output function in linux
> kernel 3.8? I mainly want to do video hardware decode using s5pv210 MFC
> and then display with HDMI.

For video playback (video post-processing) you might also need at least one
FIMC device. Please refer to arch/arm/mach-goni.c for an example on how to
add related devices to your board. You don't need the camera stuff, just 
add:

	&s5p_device_mfc,
	&s5p_device_mfc_l,
	&s5p_device_mfc_r,

	&s5p_device_fimc0,
	&s5p_device_fimc1,
	&s5p_device_fimc2,
	&s5p_device_fimc_md,

to smdkv210_devices[] and related Kconfig entries to make it compile.
You'll need a function similar to goni_reserve() in your board file
to reserve memory for the video codec.

Hope that helps.